3D Printer Parts for Improved E3D Cyclops 2 In 1 Out Hotend Kit with Thermistor and Cartridge Heater Red Color 0.4mm/1.75mm YES

Note: 1. This listing is 0.4mm/1.75mm, and with PTFE tube inside. Please let us know if you need other sizes, or the one without PTFE tube. 2. The default shipping of the heater is 12V 40W. Please leave us message if you need the one of 24V 40W. The main body of the hotend kit is of high purity aviation aluminum, and they are produced by the CNC machine that imported from German. Also for the appearance of the product, we find the anode surface treatment manufacturer to make two colors that are different from other similar products to ensure the uniqueness of the product. To improve the assembly and radiating with new appearance, which enhances the effective life of the hotend kit, and also contributes to the maintenance and replacement. Tips for radiating of the 2 in 1 out and 2 in 2 out hotend kits: Due to double pipes, the measured temperature is two times than that of single head. Therefore, customer need to take ancillary action for radiating of the heat sink block, or it will probably cause blocking, especially in summer when the temperature is high. 1. Please keep the room temperature be not too high, 2. The recommended temperature of PLA: 185-200 degrees in summer, and 195-215 degrees in winter. 3. We recommend to add the high-quality dual ball bearing 11000 rbm fan for assisted cooling (the speed is three times higher than that of similar products in the market.)

Product Features

  • Model Number:E3D
  • Application:3D Printing
  • Type:2 in 1 out

Visit The Website For More Information…

3D Printer part TEVO Tarantula Dual Extruder Upgrade Fully Kits Dual Extruder& 3010 12V cooling fan with two Nema 17 step motor

TEVO Tarantula Dual Extruder Upgrade Fully Kits Dual Extruder& 3010 cooling fan with two Nema 17 step motor
Product name: TEVO Tarantula Dual Extruder
Fan zise: 30*30*10mm
Working Voltage:12V
Filament diameter:1.75mm
Nozzle diameter:0.4mm
Packing list:
2*Nema step motor
1*Dual Extruder
1*3010 cooling fan etc…

Product Features

  • Type:Dual Extruder Upgrade Kits
  • Quality:Guarantee 12 months
  • Excellent quality assurance

Visit The Website For More Information…

3D Printer Engraving Expansion Board Kit Controller CNC Shield V4+Nano 3.0 Board+A4988 Driver with USB Cable for Arduino

Why this kit?

CNC Shield V4+Nano 3.0 Board+A4988 Driver as a driver expansion board, can be used for engraving machines, 3D printer, and It is a total of three slots, can drive three A4988 stepper motor.

Specifications:

V4 Board Size: 7.2 x 5.9cm / 2.83 x 2.32″

Improved Nano Board Size: 4.3 x 1.8cm / 1.69 x 0.7″

Driver Size: 2 x 1.5cm / 0.78 x 0.59″

Heat Sink Size: 0.8 x 0.8cm / 0.31 x 0.31″

Package:

1 x CNC Shield V4.0

1 x Nano 3.0 Board

3 x A4988 Drivers

1 x USB Cable

3 x Heat Sinks

 

Note:

 WE DO NOT PROVIDE ANY TECHNICAL HELP. Thank you for your understanding.

Product Features

  • - It is a flexible set, with 3 axis stepper motor driver, compatible with Arduino and most shields designed for the Arduino micro-drive laser engraving machine, three-axis CNC engraving machine
  • - Power DC5V interface and 7.5-12V voltage input, compatible with GRBL for easy service, part replacement, upgrade-ability and expansion
  • - Easy to operate: 2A can be controlled within the two-phase four-wire stepper motor, simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started
  • - Released the digital IO interface and the I2C interface, easy to connect to other modules, such as ENDSTOP, LCD I2C or other I2C module
  • - Simple step and direction control interface, taking anti-static measures before you use the A4988 modules in case of short-circuit

Visit The Website For More Information…

RepRap Champion All Metal Upgrade Kit Direct Drive Extruder DIY for RepRap 3D printer Prusa i3. Right version.

IMPORTANT: This right side extrder feeder version.

Depending on the type of extruder you are building using this kit, you might need different parts such as PC4-M6 tube fitting, 4mm OD 2mm ID Bowden Line PTFE tube, or M6 threaded hotend for direct feed extruder version.

Package contents:

1 x Aluminum main extruder body.
1 x Aluminum tension lever.
1 x Idler bearing for 1.75mm filament.
1 x Brass drive gear with 40 sharp teeth.
1 x High tension spring.
1 x Assembly screws.

Product Features

  • Right Side Extruder Feeder
  • CNC machined and anodized aluminum alloy parts
  • Easy to Assemble. Link to assembly instructions is included
  • You can assemble both: direct feed or bowden extruder with this feeder
  • For 1.75mm Filament size only

Visit The Website For More Information…

3D Printer Kit Clogged E3D J-Head Extruder Nozzle (2each) .6mm .8mm 1.0mm + Tool for 1.75mm filament ABS PLA

J-Head 3D Printer Kit Extruder Nozzle Head Cleaner Bits 1 each (2each) .6mm .8mm 1.0mm + bit holding pin-vise

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro drill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE TOOL
This multi-functional tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 3.5″ long.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • J-Head and Standard Nozzle Print Quality Solution
  • 3.5″ Bit Holding Pin Vise with 3.175mm and 2.0mm chuck
  • More sizes available

Visit The Website For More Information…

Ivelink MK8 Extruder Hot End Assembled Part +M6 X 30mm Teflon Tube Barrel for RepRap 3D Printer 1.75mm Filament (12V 40W Heater)

12V,40W heater. DIY hotend requires heat sink to operate properly – metal base, aluminum block, or any other type of cooling device

Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw

Feature

- 30mm long stainless PTFE lined barrel
-NTC 3950 100K pre-wired thermistor
-Low profile: only about 43 mm high
- Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market
-This will give you good selection of nozzle orifice diameters

NTC 3950 Thermistor parameters

- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25C=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter

Package Including

6 * Stainless updated barrel tube
1 * 0.4mm brass nozzle
1 * Aluminum updated heater block with necessary screws
1 * 12V 40W Cartridge Heater Cable
1 * NTC 3950 Pre-wired thermistor

Product Features

  • Assembled mk8 extruder Reprap Prusa I3 3D Printer
  • Stainless updated barrel tube for trouble free, low friction print,much solid quality
  • Pre-wired NTC3950 thermistor to the updated heater block
  • Use it with heatsink or cooled metal base(Cartridge heater:12V,40W)
  • Plenty of MK8 clone nozzles compatible with this hotend – nozzle replacement is easy

Visit The Website For More Information…

MK2B Heated Bed, NTC 3950 Thermistor & Borosilicate Glass Combo

Complete set: 214mm x 214mm MK2B with soldered thermistor, soldered power cord and 214mm x 200mm borosilicate glass plate.

Product Features

  • MK2B: 214mm x 214 mm (8.4 in x 8.4 in) 12V or 24V Heated Bed for MakerBot RepRap UP Mendel I3 Printer
  • Thermistor included: 100K ohm NTC 3950, soldered and installed
  • Borodilicate Glass: 3mm thick, 214mm x 200mm, will not interfere with MK2B mounting screws
  • Soldered power leads
  • Red soldermask and white silkscreen on both sides

Visit The Website For More Information…