TWP 3D Printer accessories 3 in 1 out Multi-color Extruder Hotend Kit NF THC-01 Three Colors Switching Hotend Kit for 0.4mm 1.75mm

3D Printer Parts 3 in 1 out Multi-color Extruder Hotend Kit NF THC-01 Three Colors Switching Hotend Kit for 0.4mm 1.75mm
Note:This hotend kit can be used as single color printing, dual colors printing or 3 colors switching printing, but not for mixing colors.
Shipping list:
Multi-colors Hotend kit * 1set
Heater and Thermistor temperature cable kit * 1set
Cooling fan * 1pc
Description
Applicable filament: 1.75mm PLA/ABS
Nozzle size:0.4mm, please let us know if you need other sizes.
Feeding mode: remote feeding
Adaptation Extruder: bulldog and other remote extruder, recommended Bulldog Extruder
Dimensions: main heat sink block 60*27*27mm
Heating voltage: 12V and 24V for option.
Color switchback waiting distance: ≥45mm
Erase Tower Volume: ≥55mm⊃3;
Color switching is fast and stable, without significant print quality defects.
Firmware modification is simple and easy to use. Users can easily achieve 3 or 2-color printing. And it can also be used as single nozzle hotend kit.

Product Features

  • A three color switch, fast and stable, smooth and clean, easy color change
  • Put an end to the multi head extrusion of various defects and color mixing nozzle monochrome printing easy to plug the problem
  • The installation dimension is accurate, the connection is convenient, and the radial mounting hole and the axial mounting slot are reserved for three surfaces
  • With single head, double head comparison, have good performance
  • Model Number: Multi-color hotend kit

Detailed Information available on our Homepage…

Teenitor 10pcs M6 threaded Nozzle for 3D Printer Accessories Full Metal 1.75mm E3D DIY Reprap Makerbot 0.2/0.3/0.4/0.6/0.8mm 2 Pcs Each

These extruder nozzles suit a variety of designs including E3D, MK7 and MK8 style hotends. Basically any hotend with a M6 mount thread would probably work.

Product Features

  • M6 threaded Nozzle
  • Input Diameter: 1.75mm
  • Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.8mm
  • Used for 3D Printer 1.75mm E3D,DIY Reprap Makerbot
  • Material:Full Metal, International Copper

Detailed Information available on our Homepage…

3D Printer Parts Accessories Maintanance Kit ABS Blue painter’s tape Print bed removal tool Glue Sticks + 4ty .40mm Clogged nozzle bits with pin-vise

Kit Includes:

1) 2 Quantity BLUE PAINTERS TAPE PRINT BED STRIPS: Perfect for ABS filament users. PLA can sometimes require Kapton tape due to higher print bed heat. Measures: 8.25″ x 8″ (200MM x 210MM). Easily applied with any flat/straight object (ruler or id card of some sort)

2) 1 high quality PRINT BED REMOVAL TOOL Measures: 8″ x 3″. Beveled for much easier print removal. 3″ wide for removing prints without them falling off one side of the tool. Semi-sturdy blade allows for some flexibility but insures the print will not bend the blade and fall off. Sturdy construction means years of use.

3) 4 quantity .40mm Tungsten Carbide Drill Bits For regular nozzle maintanance and de-clogging (comes with an amazing 3.5″ pin-vise) Use as regular maintanance before each print or to un-clog a nozzle when prints begin to lose quality. Available in MANY sizes and combinations. Build your own pack from scratch option available.

4) 2 quantity glue sticks (7g or 0.24oz each) Glue makes removal with the tool much easier. Using the glue will also increase the life of each tape strip. Glue brand may vary but will always be 7g or 0.24oz.

About the Kit:

This kit is a must have for any 3D printer owner. It can also serve as a great start-up kit for a new printer owner. Removing prints from a print bed can be quite the hassle and can leave residue behind. Using the blue painters tape will increase the life of your print bed. The glue can be applied lightly over the tape in the area where your print will be. Use the 3″ wide tool to carefully remove your print and place it where you wish. The bits will fit perfectly in the pin-vise. Use them to un-clog nozzles or as regular maintanance before printing.

Product Features

  • 2 Painters Tape Strips 8″ x 8″
  • Print Removal Tool: 8″ x 3″
  • Nozzle Maintanance Kit: 4qty .4mm Bits and Pin-Vise
  • For ABS and lower heat PLA filaments
  • 2 Glue Sticks included: Brand may vary: Always 7g 0.24oz each

Detailed Information available on our Homepage…

3D printer cell phone cover case iPhone5

3D printer Cellphone Cover Case iPhone5

Categories: Objects, Computer, Peripheral Hardware, Technology, Telecommunication, New Technologies
Fotolia image from Oleksiy Mark
Country: Finnland

You would like your cellphone to have a very special personal look? Then this is the right place for you. Design the look of your cell phone cover to your very personal taste. You’ve got the choice: We offer you a vast variety of images you can add your own personal message to, or you may use your own photos to design your unique cover.
If you need help to design your cover, contact us via Amazon and we will help you without any charge. It’s so easy! You choose your type of smartphone, create your design and we supply you with a fancy outfit.
Any more questions? Contact us via Amazon.

Available for (Send us with your order info for what cellphone you need the cover)
Viele weitere Motive und Handytypen auf Anfrage.

Product Features

  • Plastic Hard Case Cover

Detailed Information available on our Homepage…

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

Product Features

  • Material: brass
  • Input Diameter: 1.75mm
  • Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm
  • Installation: external M6 thread connection
  • Compatible: Compatible with all 1.75mm pla abs printer

Detailed Information available on our Homepage…