IC3D White 1.75mm ABS 3D Printer Filament – 5lb Spool – Dimensional Accuracy +/- 0.05mm – Professional Grade 3D Printing Filament – MADE IN USA

IC3D® – For 3D Printers, By 3D Printers (TM) Spend more time printing with high-quality 3D printer filament from IC3D®. IC3D® extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.10mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, vacuum sealed with desiccant, and packaged. IC3D® filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. Every spool of IC3D® filament is backed by a 100% SATISFACTION GUARANTEE.

Product Features

  • 5lb of 1.75mm ABS 3D printer filament
  • Filament diameter is 1.750mm +/-0.10, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1
  • Printing temperature range is 220 – 230C
  • Made in the USA under strict quality standards
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

Check Out Our Website For Details…

Prototype Supply 1.75mm HIPS Silver 3D Printing Filament, 1kg (2.2 pounds)

Prototype Supply C1 series 3D printing filament – for demanding FDM applications

3D Printer operators looking for high-quality printed objects with better dimensional control, excellent layer adhesion, and a wide selection of colors are using Prototype Supply C1 3D printing filament.

Prototype Supply C1 filament is made especially for the needs of professional-quality 3D printing:

  • Manufactured specifically for use with 3D printers, not industrial plastic welding.
  • High dimensional stability for improved accuracy.
  • Excellent melt and adhesion properties.
  • Wide spool diameter for straighter filament.
  • Wide selection of colors to choose from.

HIPS 1.75mm

Compatible with:

  • Makerbot Replicator 2X, Replicator, and Thing-o-Matic w/ Mk7 Stepstruder
  • Afinia H-Series
  • Up! Mini, Plus, and Plus2
  • Solidoodle Model 3, Model 2
  • MakerGear M2
  • Most other printers with 1.75mm extruder with a heated print bed.

HIPS filament can be used for general printing or as dissolvable support (using d-Limonene as solvent)

Product Features

  • Color: Silver
  • Material: HIPS (High Impact Polystyrene)
  • Net weight: 1 kg (2.2 pounds)
  • Opacity: Semi-Opaque
  • Diameter: 1.75 mm

Check Out Our Website For Details…

Best 3D Printing Build Surface – 4 Pack of 8×8 Square Bases – Print All Filament Types with Strong Adhesion and No Warping – Extreme Hold for ABS, PLA, HIPS, PET+, Brick, and Flexible (TPE) Filaments

Are you having issues with adhesion during printing? Do you find that you’re prints are warping or shifting whilst you’re creating a design?
This set of four adhesive print surfaces is the answer! Their micro textured surfaces create a quick and secure bond as your first layer goes down, tightly gripping your print and giving the stability it needs to turn out perfect!

Easy to remove, once your masterpiece is complete, just slide a pallet knife or print removal tool under the edge and it’ll pop right off!

Durable and hard wearing, these surfaces will protect your print bed and keep your prints perfect for up to 100 prints each. And as we include four in each set, that’s a whole lot of printing!

Whether using a heated or unheated bed, these print surfaces create an instant, secure mechanical lock with your printout, the stability that it provides is unrivalled for printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments and as it installs as a single sheet, its far easier to create a smooth surface than using tapes, glue sticks, sprays or ABS slurry.

Specifications
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F

Product Features

  • PRINTS STAY IN PLACE – The micro textured surface of this SET OF FOUR PRINT SURFACES instantly locks to your 3D model creating a stable base for the perfect print, no raft needed.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new surface without worrying about it coming unstuck.
  • CLEAN AND SIMPLE REMOVAL – At the end of a long print run, your masterpiece will jut pop right off leaving your surface ready for your next work of art!
  • MULTI PURPOSE BUILD SURFACE – These adhesive printing surfaces are great for HEATED and UNHEATED PLATES, and create a stable platform for ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments.
  • SIMPLE TO INSTALL – The adhesive backing makes these printing sheets easy to fit, just clean your build plate, remove the backing and lay the surface smooth.

Check Out Our Website For Details…

3D MARS Deep Blue PLA 1.75mm ,3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen

Welcome to the world of 3D Mars for endless opportunities of innovation and design in 3D printing!

3D MARS Deep Blue Filament extrudes precisely for fast printing and consistent layering.

3D MARS Deep Blue Filament comes with a light spool in a sealed package with a bag of desiccant.

3D MARS Deep Blue Filament’s recommended extrusion temperature is 195°C – 220°C (383°F – 428°F)

3D MARS Deep Blue Filament gives 3d printed objects the look and feel of fiberboard

Product Features

  • *Gross Meter and Weight: Deep Blue3d printer filament are 1.2KG(including spool) with 390 meters
  • *3d Printer Filament 1.75: Eco-friendly Deep Bluefilament is suitable for high precision while printing.
  • *Better Smell: The air is filled with slightly sweet smell likes candy when printing
  • *Compatibility:Deep Bluefilament works well with MakerBot, Ultimaker, 3D Pen, Prusa i3 ect
  • *+/-0.05mm Filament Diameter Tolerances:1.75mm diameter length of filament’s tight tolerance to ensure consistent feeding and stable prints

Check Out Our Website For Details…

Scorpion Flexible Nylon 3D Printing Filament 1.75 mm, 400 grams Made in the USA

A Flexible Nylon 3D Printing Filament (1.75 mm, 400 g) Makers will appreciate the easy printing and densely smooth feel of projects created with Scorpion. Our flexible nylon has fantastic interlayer adhesion. It is very strong and depending on the layer height, projects made with Scorpion can bear high forces and weight bouncing back with no damage from repeated stress. In testing, we lifted over 20 kg (44 lbs) with a handle created from the flexible nylon. ***Nylons are sensitive to water and humidity!*** Always keep in an airtight, waterproof container when not in direct use (ex. ziploc) and include a desiccant bag. If filaments are exposed to moisture, follow typical drying instructions in an oven for nylon filaments. ***It is recommended to dry nylons before printing with them for optimal quality*** Printing temperature: 225°C-235°C Print Speed: Maximum is 50 mm/s Layer heights:tested for 0.1 mm and above Printer Bed Instructions Heated bed is not necessary if you use a BuildTak bed and PVA glue. This combination produces the best quality prints with good adhesion and no peeling of the edges. If you have a heated bed, keep it at 55-60°C. and blue painters glue. A heated bed is a good alternative to the BuildTak + glue combo. Printing with neither a heated bed or BuildTak is not recommended as the edges of prints can pull up. This is fine for quick prints but not for your final designs. Glue necessary?: Yes. We recommend using a PVA glue (regular glue stick or Elmer’s washable glue) on the printer bed in order to strengthen adhesion of the first layer. Do this regardless of your printer bed substrate. Tape?: Yes, as with the glue, we recommend using blue painter’s tape or similar to create a good gripping surface for nylon.

Product Features

  • Flexible 3D Printing Filament
  • Work with most of desktop FFF/FDM 3D Printers
  • VERY strong interlayer adhesion – Easy to print
  • Comfortable wearable texture great for projects that need to be against the skin for long periods of time (bracelets, electronic wearables, cosplays)
  • Printing temperature: 225°C-235°C

Check Out Our Website For Details…

Ninebot PLA Metal Filament Copper 500g 1.75mm 3mm 3d Printer Filament Printing Filament (Brass)

What is in box ?

1 x 500g Copper Metal Filament

Product Features

  • Brass Metal Filament
  • Diameter :3.0mm/1.75mm (please leave a message to let us know which size you need when you order )
  • Print temperature: 190℃-210℃
  • Beds use high-temperature heating Masking or heated to 60 degrees
  • Weight: 500G/pcs

Check Out Our Website For Details…

3D-Creator 3D Printing Filament Material- 1.75mm ABS Plastic Loops- 12 Colors Included- 10m of Each Color- 120m In Total- Toxic- Free 3D Printer Supplies- Bonus Included In The Pack!

Fill Your Life With Colors And Re-fill Your 3D Pen At The Same Time.

You simply can’t stop designing your favorite objects since that time you first held your 3D pen in your hands.

Because now you can express your figments of imagination in a different way- you can simply create whatever you have in mind.

But what happens when your 3D pen runs out of filaments? No more imagination, no more creation, no more expression…

Well, it’s not that tragic as it sounds! Because we can proudly present you our PL refill filaments for 3D pens- what else do you need?

Unlike others, 32.8 feet loops (393 feet in total) are provided for endless creations…

What’s Better Than A Risk-Free Product?

Nothing’s better than that. Especially when those 3D pens are used by little children.

Forget about toxic materials with a strong odor- now you can relax and keep creating without having a single care in this world.

Perfect for all 3D pens that feature a 1.75 mm design- stop worrying whether you’re making the right choice!

We’re pretty sure that you’ll keep designing non-stop straight after you’ll get those loops in your hands!

Bonus Gifts Included. Because We Care.

Let’s face it- there’s nothing better than bonus gifts that make our lives easier.

That’s why not only 10 colors are included (white, black, red, green, yellow, blue, violet, gray, pink and purple) but two more colors (green and blue) are inside the pack, which can be visible in the dark!

An extra e-book is included in order to get inspired: check the 50 stencil design we suggest you!

Keep Creating Without Limits. Express Yourself With Colors. Order Your 3D Pen Refill Filaments Today.

Product Features

  • THE LONGER THE FILAMENT, THE BETTER THE RESULT: Forget about refilling your 3D pens all the time- now you can get those 32.8 feet loops (393 feet in total) that are going to serve you for the years to come. Save your peace of mind once and forever and keep creating without any hassle!
  • FITS THEM ALL: Stop worrying whether these filaments are proper for your 3D pen- thanks to the 1.75 mm ABS design, these colorful filaments refills are going to fit all conventional 1.75 mm 3D pens and printers!
  • THE HIGHEST QUALITY THAT YOU DESERVE: Now you can keep creating without having a single care in this world, as this one-of-a-kind filament set features a safe ABS construction; the non-toxic and odor-free design is just what you need in order to let your little ones creating their favorite objects without worries.
  • BONUS GIFTS EXCLUSIVELY FOR YOU: Yes, you got it right- besides the multiple colors included (white, black, red, green, yellow, blue, violet, gray, pink and purple) two more glowing-in-the-dark colors are included in the pack (blue and green). Have you run out of ideas? Get our free e-book that includes 50 stencil ideas- what else do you need?
  • WE GUARANTEE YOUR SATISFACTION: We want our clients to be happy, so just in case you feel disappointed with your purchase, we guarantee to give your money back instantly, without any hassle. Providing the highest quality to all of you is our main priority and our number-one goal.

Check Out Our Website For Details…