Excelvan New 3D Printer Printing Filament 1.75mm PLA for Print RepRap MarkerBot 1kg/2.1lbs (Red & Blue)

Description
This is the best filament on the market. The 1.75mm filament holds a diameter tolerance of 0.02mm/0.0008″” which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel. We tested many filaments at both 100-micron and 200-micron layer resolutions on FDM printers and found this one is the best.
Features:
1. Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.
2. Avaliable in both 1.75mm and 3.00mm diameter. Filament Diameter Tolerances: +/-0.02mm.
3. Air Bubbles: Zero!
4. All the filaments should be placed in dry and ventilated environment to keep. And PVA filament should be kept in sealed.

Specification:
Material:PLA
Print Temp: 190-220°C (374-428°F)
Baseplate Temp: No heat
Diameter: 1.75mm
Tolerance: ±0.02mm
Net Weight: 1KG (2.2lbs)
Gross Weight: 1.3KG(2.9lbs)

Package includes:
1. 1x 3D printer filament
2. 1x leather box

Product Features

  • Specification: Diameter: 1.75 mm / Tolerance: +/-0.02mm / Print temperature: 190-220°C (374-428°F) / Bubble: No bubble 100 percent / Net weight: 1kg/spool / Gross weight: 1.3kg/spool
  • Diameter Tolerances: Our filament quality is very good with tolerances only: +/-0.02mm.
  • Our PLA filaments DO NOT have air bubbles.
  • Material: PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity.
  • Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.

Check Out Our Website For Details…

Published by

3DReality

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Excelvan New 3D Printer Printing Filament 1.75mm PLA for Print RepRap MarkerBot 1kg/2.1lbs (Red & Blue)”

  1. Its a dark green not a bluish green as pictured, they said they would change picture. I bought this to use it in my 3d pen. I use it for making things, in ways of fixing things, more then the drawing of things.I have made many things out of this type of stuff. today, I just a new cover for the antenna on my cordless phone that broke. I found that this stuff works just as good as any other that I have bought in the past. It sticks, or melts together very nicely, and holds together very well too. I have had no problem with any kind of bubbles, or anything else, while…

  2. Great Filament for Dual Extruder Printers, Single Extruder Printers, 3D pens. 2 colors of pla on one spool. Measures 7.75″ dia, by 2.75″ thick. 2 – .5 kg colors on 1 spool.This Filament is solid stuff for a budget friendly price. will work great in any printer direct or boden drive, Tested on a Rigid bot Gen 1 with bed set to 60 deg C and Extruder at 215c, prints smooth and leaves no air pockets or bubbles. layer adhesion is great no issues with separation.The…

Leave a Reply