Inkbird Pre-Wired 308S + 1.97” Replaceable NTC-5cm Probe Digital Dual Stage Temperature Controller 110V 1000W for Aquarium Heaters,Reptile,Hatching etc.


Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year

Package Content:
1x ITC308S Temperature Controller;
1x 1.97”Stainless Steel Probe
1x English Manual

About Probe:
This temperature probe can be submersed into aquarium direclty.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.

Product Features

  • 110V 1000W
  • Plug and play design, easy to use
  • ℃ / ℉ Display can be chosen
  • Easy to set your parameters
  • Heating and Cooling differential function could be set separately

Detailed Information available on our Homepage…

Published by

3DReality

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Inkbird Pre-Wired 308S + 1.97” Replaceable NTC-5cm Probe Digital Dual Stage Temperature Controller 110V 1000W for Aquarium Heaters,Reptile,Hatching etc.”

Leave a Reply