Mitus brand ABS filament is superior quality ABS designed for ultra smooth and reliable printing in 3D printers. ABS is the gold standard used in 3D printing, renowned for its high strength. Mitus brand filaments are produced using only the 100% virgin materials resulting in superior quality filament. One common problem with cheaper China made brands is the rampant use of cheap plastic fillers such as calcium carbonate, which makes ABS very brittle and leads to extruder clogs. Mitus brand filament combines the highest grade raw materials with leading precision equipment. In fact, all Mitus brand filament are extruded with an industry leading four laser micrometers which measure and control diameter and roundness producing a tolerance of +/- 0.03mm. Other cheap China made brands will commonly have voids or cavities in the middle of the filament which causes uneven printing and even failures. Mitus brand filament is guaranteed to be void and cavity free.
All Mitus ABS filaments are produced with vibrant full rich colors, each being thoroughly tested and evenly distributed. Every Mitus color has a pantone color chip number for exact reproducibility. All Mitus ABS spools comes with a net weight of 1 kg ABS. Each Mitus ABS spool comes vacuum sealed with 99.98% of moisture removed and includes a desiccant pack for extra protection. The spool features a unique double zipper storage bag which allows for the reuse and storage of the ABS spool after opening. Mitus brand demands complete satisfaction with every filament spool.
- Diameter: 2.85mm +/- 0.03mm
- Net weight: 1kg
- Proudly made in America
Special printing note – Depending on the 3D printer used, a slight increase in flow rate from 100 to 110-140 may be required. Additionally, some 3D printers will extrude more smoothly with a 5°C increase in temperature, from 240°C to 245°C for darker colors and 235°C to 240°C for lighter colors.
- 100% virgin material without cheap plastic fillers or regrind
- ABS Print Extrusion Temperature: 230 – 245°C
- Quad laser micrometer for controlling diameter and roundness tolerances, within +/- .03mm
- Free of cavities, pockets, or voids
- Proudly made in the USA