Nema 14 Bipolar Stepper Motor 5.4V 0.8A 25.5oz.in/18Ncm 3D Printer

This hybrid bipolar Nema 14 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 800 mA at 5.4 V, allowing for a holding torque of 18Ncm(25.5oz.in).

Electrical Specification:

* Manufacturer Part Number: 14HS13-0804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 18Ncm(25.5oz.in)
* Rated Current/phase: 0.8A
* Phase Resistance: 6.8ohms
* Inductance: 10mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 35 x 35mm
* Body Length: 34mm
* Shaft Diameter: 5mm
* Shaft Length: 24mm
* D-cut Length: 16.5mm
* Number of Leads: 4
* Lead Length: 400mm
* Weight: 190g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • Middle Size with Hight Torque
  • 18Ncm(25.5oz.in) holding torque
  • NEMA 14 bipolar 1.38″x1.38″x1.34″ 4-wir
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 0.8A & resistance 6.8ohms

Visit The Website For More Information…

Published by

3DReality

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Nema 14 Bipolar Stepper Motor 5.4V 0.8A 25.5oz.in/18Ncm 3D Printer”

Leave a Reply