OctagonStar DRV8825 Stepper Motor Driver Module 4-layer for 3D Printer Reprap RP A4988(5PCS)

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step).
It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
DRV8825 Technical Specs:
- Simple step and direction control interface
– Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
– Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
– 45 V maximum supply voltage
– Built-in regulator (no external logic voltage supply needed)
– Can interface directly with 3.3 V and 5 V systems
– Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
– Short-to-ground and shorted-load protection
– 4-layer, 2 oz copper PCB for improved heat dissipation
– Exposed solderable ground pad below the driver IC on the bottom of the PCB
– Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects.
Brand Listing, If you buy is not OctagonStar brand product, You Can Apply for a Refund and Compensation.

Product Features

  • DRV8825 Stepper Motor Driver Module.
  • 4-layer,Improved heat dissipation,Simple step and direction control interface.
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher.
  • Brand Listing, If you buy is not OctagonStar brand product, You Can Apply for a Refund and Compensation.

Visit The Website For More Information…

Published by

3DReality

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

One thought on “OctagonStar DRV8825 Stepper Motor Driver Module 4-layer for 3D Printer Reprap RP A4988(5PCS)”

Leave a Reply