Printrbot Assembled Simple 2013 3D Printer, PLA Filament, 1.75mm Ubis Hot End, 4″ x 4″ x 4″ Build Volume

The Printrbot Simple 3D printer comes fully assembled, has an open platform, a frame constructed of machined aluminum and laser-cut birch wood, and fabricates objects using PLA (polylactic acid) thermoplastic filament, with a vertical resolution of 100 microns (0.10 mm). The printer can build objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D). It comes with a direct drive extruder with a cooling fan, and an Ubis hot end that accepts 1.75 mm PLA filament. The printer is commanded through the provided micro USB cable using G-code numerical control instructions. An SD memory card slot can store G-Code instructions on a memory card (sold separately) for operation without a connection to a computer. It can be used with 3D printer management software packages (sold separately). The frame is made of laser-cut birch wood. Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement. The size 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001. The printer comes with a sample spool of PLA filament.

Specifications

Printing materialPLA
Vertical (Z-axis) resolution100 microns (0.10 mm)
Hot endUbis 1.75 mm
Nozzle diameter0.4 mm
Build speed80-100 mm/min
Build volume4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
Printer weight5.25 lb (2.38 kg)
Printer size7 x 8 x 9 inches (H x W x D)
Input formatG-code
Input methodMicro USB cable (included) or SD memory card (sold separately)

*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

3D printers fabricate physical objects directly from computer-aided-design (CAD) data sources. Objects created by additive manufacturing are built by dispensing successive thin layers of molten material onto a moving platform base from a robotic extruder nozzle. The material is most commonly a thermoplastic or HDPE (high-density polyethylene) filament.

Printrbot manufactures desktop 3D printers and accessories. The company is headquartered in Lincoln, CA.

What’s in the Box?
  • Printrbot Simple 3D Printer
  • 12v 6A laptop style power supply
  • Power cord
  • USB cable
  • Sample spool of 1.75 mm PLA plastic filament

Product Features

  • Fabricates objects from G-code instructions using PLA thermoplastic filament
  • Open platform for ease of access with machined aluminum and laser-cut birch wood frame construction
  • Builds objects to maximum dimensions of 4 x 4 x 4 inches/102 x 102 x 102 mm (H x W x D)
  • Vertical (Z-axis) resolution of 100 microns (0.10 mm)
  • Machined aluminum axis rods with linear bearings and injection molded gears help ensure precise movement

Click Here For More Information

Published by

3DReality

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “Printrbot Assembled Simple 2013 3D Printer, PLA Filament, 1.75mm Ubis Hot End, 4″ x 4″ x 4″ Build Volume”

  1. Super cool, if not professional level It took about two hours to hack my way through the spotty documentation. The problem is that the software the printer uses isn’t owned by printrbot, and has changed since they wrote the manual. Expect to end up forum surfing to troubleshoot.Once it worked, it created tolerable looking prints. It comes out to $0.25 and half an hour per small toy ($.033/g). Perhaps when I learn to calibrate it, things will be a bit more crisp and precise. But, good enough for me! I use this…

  2. A hard print but good I would give it 5 stars but the manufacturer didn’t mention a couple of gotchas. 1-The printer comes with a printed sample which has to be removed before using the printer. 2-The software used in the help files is out of date and the item has a fan which is not addressed. The device setup went smoothly once the software was loaded on the computer. The site has a link, ( to save on license costs) and I found other software packages that work fine. Word of caution; a tie wrap that holds the Y top…

  3. Documentation NOT good, but even I got it running I love this machine, even though it has created an all-consuming 3D printing passion in me! Set-up was very frustrating due to small yet show-stopping things not mentioned in documentation from Printrbot. First, remove the sample from the plate and a panel of plywood along the side of the long “arm” before you do anything else. You need to set up the COM3 USB port mentioned in the online Getting Started users guide instructions if you are using Windows. After that, out of desperation when…

Leave a Reply