TWP 3D Printer accessories 3 in 1 out Multi-color Extruder Hotend Kit NF THC-01 Three Colors Switching Hotend Kit for 0.4mm 1.75mm

3D Printer Parts 3 in 1 out Multi-color Extruder Hotend Kit NF THC-01 Three Colors Switching Hotend Kit for 0.4mm 1.75mm
Note:This hotend kit can be used as single color printing, dual colors printing or 3 colors switching printing, but not for mixing colors.
Shipping list:
Multi-colors Hotend kit * 1set
Heater and Thermistor temperature cable kit * 1set
Cooling fan * 1pc
Description
Applicable filament: 1.75mm PLA/ABS
Nozzle size:0.4mm, please let us know if you need other sizes.
Feeding mode: remote feeding
Adaptation Extruder: bulldog and other remote extruder, recommended Bulldog Extruder
Dimensions: main heat sink block 60*27*27mm
Heating voltage: 12V and 24V for option.
Color switchback waiting distance: ≥45mm
Erase Tower Volume: ≥55mm⊃3;
Color switching is fast and stable, without significant print quality defects.
Firmware modification is simple and easy to use. Users can easily achieve 3 or 2-color printing. And it can also be used as single nozzle hotend kit.

Product Features

  • A three color switch, fast and stable, smooth and clean, easy color change
  • Put an end to the multi head extrusion of various defects and color mixing nozzle monochrome printing easy to plug the problem
  • The installation dimension is accurate, the connection is convenient, and the radial mounting hole and the axial mounting slot are reserved for three surfaces
  • With single head, double head comparison, have good performance
  • Model Number: Multi-color hotend kit

Detailed Information available on our Homepage…

Happisland Drill Bits for 3D Printer Nozzle Cleaning Kit Pack of 7 PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.4mm 0.45mm 0.5mm

Pack of 7 PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.35mm 0.4mm 0.45mm 0.5mm

Product Features

  • Pack of 7 PCS: 0.2mm 0.25mm 0.3mm 0.35mm 0.35mm 0.4mm 0.45mm 0.5mm
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Color is random
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees
  • Any question,pls feel free to contact us.

Click Here If You Need More Detailed Info…

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

Product Features

  • Material: brass
  • Input Diameter: 1.75mm
  • Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm
  • Installation: external M6 thread connection
  • Compatible: Compatible with all 1.75mm pla abs printer

Detailed Information available on our Homepage…

Happisland Drill Bits for 3D Printer Nozzle Cleaning Kit Pack of 10PCS: 0.3mm 0.4mm 0.5mm 0.6mm 0.7mm 0.8mm 0.9mm 1.0mm 1.1mm 1.2mm

10 Pcs Drill Bits:0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2mm

Product Features

  • Pack of 10 PCS: 0.3mm 0.4mm 0.5mm 0.6mm 0.7mm 0.8mm 0.9mm 1.0mm 1.1mm 1.2mm
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Color is random
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees
  • Any question,pls feel free to contact us.

Click Here If You Need More Detailed Info…

Happisland Drill Bits for 3D Printer Nozzle Cleaning Makerbot Mendel Reprap Pack of 10PCS:0.2mm 0.3mm 0.4mm 0.5mm 0.6mm,Each 2 Pcs

Pack of 10 PCS:0.2mm 0.3mm 0.4mm 0.5mm 0.6mm,Each 2 Pcs

Product Features

  • Pack of 10 PCS:0.2mm 0.3mm 0.4mm 0.5mm 0.6mm,Each 2 Pcs
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Color is random
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees
  • Any question,pls feel free to contact us.

Detailed Information available on our Homepage…

PChero 5pcs 30MM Length Extruder 1.75mm Tube and 5pcs 0.4mm Brass Extruder Nozzle Print Heads for MK8 Makerbot Reprap 3D Printers

Specification of Extruder Tube:

Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm

Nozzle Throat Inner Diameter:4mm

Teflon Pipe Inner Diameter : 2mm

Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden.
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Compatible: compatible with all 1.75mm PLA ABS printer.

Package Including:
5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer)
5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head

Attention: Small parts, keep away from children!!!

Product Features

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.
  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Compatible: compatible with all 1.75mm PLA ABS 3D printer.
  • Attention: Small parts, keep away from children!!!

Visit The Website For More Information…

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

Descriptions:

●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.

Reduced Bulk and Z-Height.
●We’ve focused on cutting as much bulk from the V6 as possible. This means an overall length of just 72mm and significant reductions in bulk in the X/Y dimensions by using our new injection moulded fan duct.

Package Included:
●1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
●1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S
●1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
●1 x Pneumatic Straight Fitting to connect to extruder cold end

Product Features

  • High Temperature Peformance.
  • RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
  • Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
  • 12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
  • Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.

Visit The Website For More Information…