Z-ABS 3D Printing Filament Sky Blue 1.75mm 800g

Z-ABS Filament

Z-ABS – plastic filament dedicated for Zortrax M200 3D Printer. The result is a matte, uniform and opaque surface with pure color.

Use Z-ABS with Zortrax M200 and Z-Suite Software in order to make easy-to-remove support structure for complex models. No additional extruder or material required to print with advanced support.

Specifications:

Color: Sky Blue

Printing technology: LPD (Layer Plastic Deposition)

Dedicated device: Zortrax M200 3D Printer

Features: Durable and strong, suitable for prototyping mechanical parts, architectural models, design prototypes

Weight: 1 kg (2.2 lb) gross wt. / 800 g (1.76 lb) net. wt.

Efficient melting point for 3D printing: 250 – 260 °C [482 – 500 F]

Glass Transition Temperature: 125 °C [257 F]

Vicat Softening Temperature: 112 °C [234 F]

Thermal Expansion: Minimal

Odor: Nearly odorless

Hazards: Product does not present any hazard while operating

Product Features

  • Z-ABS – plastic filament dedicated for Zortrax M200 3D Printer.
  • The result is a matte, uniform and opaque surface with pure color.
  • Use Z-ABS with Zortrax M200 and Z-Suite Software in order to make easy-to-remove support structure for complex models.
  • No additional extruder or material required to print with advanced support.
  • Now available in 11 colors – Android Green, Blue, Cool Grey, Green, Orange, Pure Black, Pure White, Red, Sky Blue, Warm Grey and Yellow. More to come.

Check Out Our Website For Details…

[STAR] Alchement – PETG Series, 3D Filament, 1.75mm, 1kg (Transparent Yellow)

PETG Filament is short for polyethylen Terephthalateco-1, 4-cylclohexylenedimethylene terephthalate, and is a transparent type of coplyester. It claims to be a material strong like ABS and easy to print like PLA.Chemically different from a number of other printing filaments, it can be printed at a low temperature without pre-drying, and should hardly stick to your print bed. Despite its high level of toughness and impact strength, it remains very flexible and recyclable, despite its transparency. It’s also odorless during printing and features a low shrink rate, while not suffering from warping as ABS often does. Aside from the natural transparent version, it also comes in Magenta, Yellow and Blue. Its full printing specifications are: – Print temperature:200~240°c – Plate temperature:75~85C – Printing speed:30~60mm/s – Moving speed:30~60mm/s

Product Features

  • PETG Filament is short for polyethylen Terephthalateco-1, 4-cylclohexylenedimethylene terephthalate, and is a transparent type of coplyester.
  • It claims to be a material strong like ABS and easy to print like PLA.Chemically different from a number of other printing filaments, it can be printed at a low temperature without pre-drying, and should hardly stick to your print bed.
  • Print temperature:200~240°c

Check Out Our Website For Details…

Ivelink MK8 Extruder Part Assembled Hot End + 0.4mm Nozzle for RepRap 3D Printer 1.75mm Filament (12V 40W Heater)

12V,40W heater. DIY hotend requires heat sink to operate properly – metal base, aluminum block, or any other type of cooling device

Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw

Feature

-30mm long stainless PTFE lined barrel
-NTC 3950 100K pre-wired thermistor
-Low profile: only about 43 mm high
- Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market
-This will give you good selection of nozzle orifice diameters

NTC 3950 Thermistor parameters

- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25C=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter

Package Including

6 * 0.4mm brass nozzle
1 * Stainless updated barrel tube
1 * Aluminum updated heater block with necessary screws
1 * 12V 40W Cartridge Heater Cable
1 * NTC 3950 Pre-wired thermistor

Product Features

  • Assembled mk8 extruder Reprap Prusa I3 3D Printer
  • Stainless updated barrel tube for trouble free, low friction print,much solid quality
  • Pre-wired NTC3950 thermistor to the updated heater block
  • Use it with heatsink or cooled metal base(Cartridge heater:12V,40W)
  • Plenty of MK8 clone nozzles compatible with this hotend – nozzle replacement is easy

Visit The Website For More Information…

SainSmart Red Copper Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs

SainSmart 3D Printer Filament

SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood/ Metal 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.

This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!

Features:

* Widely used in health care, education, toys, building, automobile, electronics, anime field, etc.
* For common 3D printers such as Reprap, FlashForge, MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2, UP! and more.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

Product Features

  • 40% Real Red Copper,60% PLA
  • 0.5 KG (Approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 190°C – 200°C (374°F – 392°F)
  • Can be grinded and polished ; Fine gloss and corrosion resistance

Check Out Our Website For Details…

Teenitor 10 Pcs 0.4mm Brass Mk8 Nozzle for For 1.75MM Filament MakerBot Replacement Print Head Extruder 3D Printer parts

Material: Brass Color: Brass Quantity: 10 pc Length: 12mm Screw thread: M6 x 1.0 Caliber: 0.4mm Feature: 1.Mk8 nozzle represent improvement over previously used Mk7 nozzle. Mk8 has shorter length of extrusion channel than Mk7, which helps to extrude plastic with less force. 2.for MakerBot Mk8 0.4mm Replacement Nozzle for Replicator 1 & 2 Stepstruder. 3.This nozzle makes printing with PLA easier. Package includes: 10 x Mk8 nozzle

Product Features

  • Material: Brass
  • Screw thread: M6 x 1.0
  • Caliber: 0.4mm
  • Quantity: 10 pc
  • Teenitor Brand Products.

Visit The Website For More Information…

3D MARS Sample Bronze 1.75mm 3D Printer PLA Filament (20 Meters / 65 Feet Each Color) for 3D Printing and 3D Pens Filament,Dimensional Accuracy +/- 0.05mm


Welcome to the world of 3D Mars for endless opportunities of innovation and design in 3D printing!

Please pay attention to these information before purchasing:

*Type: Sample Bronze Filaments
*Package: Individual Vacuum Sealed
*Gross meter :20 Meter / 65 Feet Each Color, without spool
*Length of Filament Diameter:1.75mm,Dimensional Accuracy +/- 0.05mm

Quick Guides for 3D printer buyers:

PLA users sometimes have difficulties in jamming the hot-end, just add a drop of oil to hot-end, and then when you put a roll on,it will give you smooth, jam-free, jam-smelling prints till the cows come home.
Getting the perfect extruder height is critical to great prints– I prefer the z-level to be set so that there is a very faint impression left on blue painters tape when removing a PLA model.

Product Features

  •  Pla Filament: Eco-friendly Bronze filament is suitable for FDM 3d printing technology
  •  No Jamming: Bronze sample of 3d printing materials are not easy to block when extruding from brass printing nozzle
  •  Gross meter: Sample filament is 20 meter / 65 feet each color without 3d printing filament spool.
  •  Compatibility: Sample of 3d printer filament pla 1.75mm works well with MakerBot, Ultimaker, 3D Pen, Prusa i3 ect types of 3d printers.
  •  High-Precision:1.75mm diameter length with dimensional accuracy +/- 0.05mm of filament’s tight tolerance to ensure consistent feeding and stable prints for home printers, 3D pens, hobbyists and schools.

Click Here For More Information

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament -0.5kg/1.1lbs (Natural)

SainSmart 3D Printer Filament

* SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.
* This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
* The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!
 

Feature

* PVA is a water-soluble synthetic polymer.
* PVA is degradable and dissolves quickly in water.
* It is the perfect filament to use as support material for it’s dissolvable properties.
* Generally, PVA is used in conjunction with PLA not ABS because it adheres well to PLA.The extrusion temperature difference can also be problematic with ABS.
* Importantly, PVA should not be allowed to sit at temperatures higher than 200°C for an extended period of time, known as pyrolysis, it will form jams which are extremely difficult to remove.
* Unlike PLA and ABS, you cannot remove the jam by increasing the temperature.
* Clearing the jam in the nozzle will often require it to be re-drilled or replaced altogether, so be careful!
 

Compatible 3D Printers:
All FDM 3D Printers
• PIXMA MG5420
• Replicator 2
• Ultimaker 1
• RepRap
• Replicator 2x
• Prusa i3
• Mendel Prusa
• Ultimaker 2
• Replicator
• Print/bot
• Leapfrog Creatr
• Zcorp
• Solidoodle
• UP! Plus
• Form 1
• Cube X
• Up! Mini
• Creator
• Mende!Max
• uPrint
• PowerWasp
• Dimension
• Lulzbot
• Felix 2.0

 

Let’s See How PVA Support: https://www.youtube.com/watch?v=LCpp6SmvlJo

Product Features

  • 0.5 KG (approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PVA 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 160°C – 180°C (320°F – 356°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…