5pcs 3D Printer accessories for E3D V6 all-metal Bowden Hotend Heatbreak Feeding Tube for 1.75mm filament

Specifications: Inner hole 2mm; radiating end threaded M7; heated end M6; total length : 22.4mm; Material: 316F / stainless steel; Scope: E3D-V6 long distance wire; Features: Tail part: 4.2mm hole, wearing Φ4 × 2 Teflon tube, reducing friction with the wire during the heat pipe wall. Application: Only for E3D V6 Bowden Hotend 1.75mm Filament supplies.

Product Features

  • Material:316F/stainless steel
  • application:3d printing

Detailed Information available on our Homepage…

Longruner 3d Printer Controller Kit Mega 2560 R3 + Ramps 1.4 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino Reprap

Update High Quality Ramp Board by changing MOSFET: Old MOSFET IC Model : PDF55N06 Specification:VDSS:60V ID:55A New MOSFET IC model: HM60N06 Specification:VDSS:60V ID:60A HM60N06 current up to 60A, More safety Package List: (1) RAMPS 1.4 x 1 (2) Kuman Mega 2560 R3 x 1 (3) A4988 Stepper Motor Driver with Heatsink x 5 (4) LCD 12864 Graphic Smart Display Controller x 1 (5) Smart Adapter x 1 (6) Cable x 2 (7) USB Cable x 1

Product Features

  • 2017 Updated Version 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
  • Mega 2560 compatible with arduino.
  • LCD 12864 Graphic Smart Display Controller This full graphic Smart Controller contains a SD-Card.
  • A4988 Stepper Motor Driver A4988 is a complete microstepping motor driver with built-in translator for easy operation.
  • Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.

Click Here If You Need More Detailed Info…

Quimat 3D Printer Controller Kit for Arduino Mega 2560 Uno R3 Starter Kits +RAMPS 1.4 + 5pcs A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap

Package Content: (1) Mega 2560 (2) 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. (3) A4988 Stepper Motor Driver A4988 is a complete micro-stepping motor driver with built-in translator for easy operation (4) LCD 12864 Graphic Smart Display Controller This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included. Package List: (1) RAMPS 1.4 x 1 (2) Mega 2560 R3 x 1 (3) A4988 Stepper Motor Driver with Heatsink x 5 (4) LCD 12864 Graphic Smart Display Controller x 1 (5) Smart Adapter x 1 (6) Cable x 2 (7) USB Cable x 1

Product Features

  • 3D Printer Controller Kit Mega 2560
  • 3D Printer Controller RAMPS 1.4,A4988 Stepper Motor Driver
  • LCD 12864 Graphic Smart Display Controller
  • 3D Printer Controller 100% compatible with Arduino RepRap
  • Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents

Click Here For More Information

PChero 5pcs 30MM Length Extruder 1.75mm Tube and 5pcs 0.4mm Brass Extruder Nozzle Print Heads for MK8 Makerbot Reprap 3D Printers

Specification of Extruder Tube:

Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm

Nozzle Throat Inner Diameter:4mm

Teflon Pipe Inner Diameter : 2mm

Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden.
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Compatible: compatible with all 1.75mm PLA ABS printer.

Package Including:
5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer)
5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head

Attention: Small parts, keep away from children!!!

Product Features

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head.
  • Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • Compatible: compatible with all 1.75mm PLA ABS 3D printer.
  • Attention: Small parts, keep away from children!!!

Visit The Website For More Information…

3DSWAY 3D Printer Parts 12V 404010mm Hydraulic Bearing Blow Radial Cooling Fan Turbo Fan with XH2.54-2P Wire Pack of 5pcs

Hydraulic fan is the fan between oil-bearing fan and ball bearing fan. It is cheap but with long life and the advantages of ultra-quiet fan. In a word, it is a highly cost-effective product.

Product size: 40mm*10mm, the line length: 150mm, 2.54 white terminal plugs.

General Specification: Outline Dimension: 40*40*10mm
Rated Voltage: DC12V
Voltage Range: DC7V ~ DC13.2V
Rated Current: 0.06A+10%.
Rated Power Consumption: 0.72W
Speed: 5500RPM±10%.
Min. Airvolume Fiow: Over 4.52CFM.
Max. Static Pressure: 5.15mm-H2O.
Noise Level: 28.6dB(A).
Life Expentancy: 30000hrs at 40 ℃.
No. of Pole: 4
Rotating Direction: Counter-Clockwise.

Electrical Specification:

Polarity Protection: Open circuit when Vcc & GND are exchanged;Circuit won’t be burned within 5 seconds when Vcc & GND are exchanged.
Insulation Resistance: 10 M” / b/w unshielded wire and frame at 500 VDC/min. .
Dielectric Strength: 5 mA Max. / Measured b/w lead wire (+) and frame at 500 VAC/min .
Operating Temp.Range: Temperature:-10℃~70℃; Humidity: 35%~85%.

Please feel free to contact us if you need more details or any support. Thanks!

Product Features

  • Speed:5500RPM±10%
  • Life Expentancy:30000hrs at 40 ℃
  • Min. Airvolume Flow:Over 4.52CFM

Visit The Website For More Information…

C.J. SHOP 5PCS Leveling Component Suite M3 Screw Leveling Spring Leveling Knob For 3D Printer Accessories

Feature:

Material: Stainless steel
Size: M3 x 40mm
Usage: 3D printing

Package included:

1 x Leveling Components M3 screw

Product Features

  • Material: Stainless steel
  • Size: M3 x 40mm
  • Usage: 3D printing

Detailed Information available on our Homepage…

Anpro 3D Print Removal Tool with 5PCS 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

3D Print Removal Tool:

  • Tool Size – Blade length: 96mm; blade width: 12mm; handle length: 79mm
  • Blade is flexible, thin and toughness of total long 175mm
  • The 3D print removal tool can help you easy get the print parts off from the print bed safety
  • Useful to pop prints off the bed, and to scrape off stuck-on plastic with suitable size
  • An essential addition to your 3D Printer Tool Kit.
  • Specifications of Drill Bits:

  • Bit diameter: 0.4mm
  • The bit length: 16mm
  • The length of shank: 20mm
  • Package included:
    5 x Anpro Drill Bits
    1 x Anpro 3D Print Removal Tool

    Warranty:

    60 days money-back & 24-months warranty & Within 24 hours response

    Product Features

    • Removal Tool – 175mm long flexible blade helps to reach underneath large prints, 3D print removal tool is easy get the prints off from the print bed.
    • Removal Tool – Suitable size, more flexible, a necessary tool set in your 3D printer tool kit
    • Drill Bit – Bit Diameter:0.4mm, bit length: 15mm, length of shank: 20mm, pack of 5 pcs.
    • Drill Bit – Material: Carbon steel, high strength and high hardness performance.
    • Drill Bit – Using high quaility materials and fine grinding process makes bit more sharp.

    Click Here If You Need More Detailed Info…