TWP 3D Printer accessories 3 in 1 out Multi-color Extruder Hotend Kit NF THC-01 Three Colors Switching Hotend Kit for 0.4mm 1.75mm

3D Printer Parts 3 in 1 out Multi-color Extruder Hotend Kit NF THC-01 Three Colors Switching Hotend Kit for 0.4mm 1.75mm
Note:This hotend kit can be used as single color printing, dual colors printing or 3 colors switching printing, but not for mixing colors.
Shipping list:
Multi-colors Hotend kit * 1set
Heater and Thermistor temperature cable kit * 1set
Cooling fan * 1pc
Description
Applicable filament: 1.75mm PLA/ABS
Nozzle size:0.4mm, please let us know if you need other sizes.
Feeding mode: remote feeding
Adaptation Extruder: bulldog and other remote extruder, recommended Bulldog Extruder
Dimensions: main heat sink block 60*27*27mm
Heating voltage: 12V and 24V for option.
Color switchback waiting distance: ≥45mm
Erase Tower Volume: ≥55mm⊃3;
Color switching is fast and stable, without significant print quality defects.
Firmware modification is simple and easy to use. Users can easily achieve 3 or 2-color printing. And it can also be used as single nozzle hotend kit.

Product Features

  • A three color switch, fast and stable, smooth and clean, easy color change
  • Put an end to the multi head extrusion of various defects and color mixing nozzle monochrome printing easy to plug the problem
  • The installation dimension is accurate, the connection is convenient, and the radial mounting hole and the axial mounting slot are reserved for three surfaces
  • With single head, double head comparison, have good performance
  • Model Number: Multi-color hotend kit

Detailed Information available on our Homepage…

Teenitor 10pcs M6 threaded Nozzle for 3D Printer Accessories Full Metal 1.75mm E3D DIY Reprap Makerbot 0.2/0.3/0.4/0.6/0.8mm 2 Pcs Each

These extruder nozzles suit a variety of designs including E3D, MK7 and MK8 style hotends. Basically any hotend with a M6 mount thread would probably work.

Product Features

  • M6 threaded Nozzle
  • Input Diameter: 1.75mm
  • Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.8mm
  • Used for 3D Printer 1.75mm E3D,DIY Reprap Makerbot
  • Material:Full Metal, International Copper

Detailed Information available on our Homepage…

3D Printer Parts Accessories Maintanance Kit ABS Blue painter’s tape Print bed removal tool Glue Sticks + 4ty .40mm Clogged nozzle bits with pin-vise

Kit Includes:

1) 2 Quantity BLUE PAINTERS TAPE PRINT BED STRIPS: Perfect for ABS filament users. PLA can sometimes require Kapton tape due to higher print bed heat. Measures: 8.25″ x 8″ (200MM x 210MM). Easily applied with any flat/straight object (ruler or id card of some sort)

2) 1 high quality PRINT BED REMOVAL TOOL Measures: 8″ x 3″. Beveled for much easier print removal. 3″ wide for removing prints without them falling off one side of the tool. Semi-sturdy blade allows for some flexibility but insures the print will not bend the blade and fall off. Sturdy construction means years of use.

3) 4 quantity .40mm Tungsten Carbide Drill Bits For regular nozzle maintanance and de-clogging (comes with an amazing 3.5″ pin-vise) Use as regular maintanance before each print or to un-clog a nozzle when prints begin to lose quality. Available in MANY sizes and combinations. Build your own pack from scratch option available.

4) 2 quantity glue sticks (7g or 0.24oz each) Glue makes removal with the tool much easier. Using the glue will also increase the life of each tape strip. Glue brand may vary but will always be 7g or 0.24oz.

About the Kit:

This kit is a must have for any 3D printer owner. It can also serve as a great start-up kit for a new printer owner. Removing prints from a print bed can be quite the hassle and can leave residue behind. Using the blue painters tape will increase the life of your print bed. The glue can be applied lightly over the tape in the area where your print will be. Use the 3″ wide tool to carefully remove your print and place it where you wish. The bits will fit perfectly in the pin-vise. Use them to un-clog nozzles or as regular maintanance before printing.

Product Features

  • 2 Painters Tape Strips 8″ x 8″
  • Print Removal Tool: 8″ x 3″
  • Nozzle Maintanance Kit: 4qty .4mm Bits and Pin-Vise
  • For ABS and lower heat PLA filaments
  • 2 Glue Sticks included: Brand may vary: Always 7g 0.24oz each

Detailed Information available on our Homepage…

3D Printer Parts Accessories Print removal tool Remove prints safely from print bed

Included:

1) 1 high quality PRINT BED REMOVAL TOOL Measures: 8″ x 3″. Beveled for much easier print removal. 3″ wide for removing prints without them falling off one side of the tool. Semi-sturdy blade allows for some flexibility but insures the print will not bend the blade and fall off. Sturdy construction means years of use. This is a must have for any 3D printer owner or anyone in need of a quality putty knife or spatula.

Product Features

  • 3D Print Removal Tool
  • Measures 8″ long x 3″ wide
  • Wide enough to remove prints without dropping
  • No more damaged prints
  • Slightly flexible but sturdy and well made

Detailed Information available on our Homepage…

5pcs 3D Printer accessories for E3D V6 all-metal Bowden Hotend Heatbreak Feeding Tube for 1.75mm filament

Specifications: Inner hole 2mm; radiating end threaded M7; heated end M6; total length : 22.4mm; Material: 316F / stainless steel; Scope: E3D-V6 long distance wire; Features: Tail part: 4.2mm hole, wearing Φ4 × 2 Teflon tube, reducing friction with the wire during the heat pipe wall. Application: Only for E3D V6 Bowden Hotend 1.75mm Filament supplies.

Product Features

  • Material:316F/stainless steel
  • application:3d printing

Detailed Information available on our Homepage…

Pink Lizard GT2 Synchronous Wheel 3MM With 16 Teeth For 3D Printer Accessories

GT2 Synchronous Wheel 3MM With 16 Teeth For 3D Printer Accessories Description: Material: Alloy Type: synchronous belt pulley This is for 6mm wide belt. Package Included: 1 x Synchronous Wheel. If there is a size or colour choice please email me with your choice or it will be sent at random.

Product Features

  • GT2 Synchronous Wheel
  • 3MM With 16
  • Electronics
  • Please Allow 7-23 Business Days For Delivery
  • Package Contains One Item

Detailed Information available on our Homepage…