Choose Worksteel PLA 3D Printer Filaments to Achieve Amazing Results!
The 3D printer filaments display less warping, and this is the reason why it is possible to print without a heated bed.
The 3D printer filaments are made for 3D printers with degradable bio-plastic, and the printed objects will have a glossier look.
The 3D printer filaments are compatible with most commercially available non-cartridge based 3D printers.
Important Instructions for Worksteel PLA 3D Printer Filaments
The print bed or print surface should be level.
The extruder should be adjusted to the correct height from the bed.
The printing temperature should be adjusted according to the 3d printer.
The printing speed should be adjusted according to the ambient temperature.
A good base material should be provided for PLA to adhere to.
Be sure to insert the thread into the spool hole to avoid tangles.
Keep the filaments in sealed bag until ready for use.
Keep the filaments in dry place & Keep away from heat.
Recommended to store the filaments from -68 to 122 Fahrenheit / -20 to 50 Celsius.
Know More about Worksteel PLA 3D Printer Filaments
1.75 mm Diameter with +/- 0.02 mm Tolerance
374 – 428 Fahrenheit / 190 – 220 Celsius Printing TEMP
40 -100 mm/s Print Speed
No Need Platform TEMP or Adjust According to the 3D Printer
360 yd / 330 m One Spool
Worksteel PLA 3D Printer Filaments, “Add to Cart” right now & Enjoy 90 Days Money Back and 1-Year WARRANTY!
- +/- 0.02MM TOLERANCE: Worksteel PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.02 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the PLA 3D printing filaments.
- 1.75MM PLA FILAMENT: The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, Worksteel 3D printer filaments have adjusted the degradability of the material for optimal performance, so Worksteel PLA filaments are not brittle during 3D printing jobs.
- VACUUMED SEALED PACKAGING: Some 3D printing materials can be negatively affected by moisture, so this is why Worksteel 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- 100% ENVIRONMENTAL FRIENDLY: Worksteel 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75 mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic.
- 100% SATISFACTION GUARANTEE: Worksteel insists on offering best 3D printer filaments and best customer service for customers. The PLA 3D printer filaments are backed by Worksteel 90 days Money Back Guarantee with 1-Year Warranty. Seize the chance to click “Add to Cart” button right now!
Check Out Our Website For Details…
Tecboss 4th Generation TP-04 3D Printer Pen is exclusively designed to be kids friendly. This 3D doodle pen enables your creative kids to bring all of their wonderful and imaginative ideas to life. This 3D printing pen melts PLA filaments at low temperature, after being extruded from the nozzle, it instantly cools and solidify while you draw the object in your mind.
This 3D model pen is featured with low temperature melting, which even allows you literally drawing in the palm. It grants no burn, no toxic, no clog; it is one button to operate; it is powered through 5V USB cable.
For best performance, please use high quality PLA filaments. This pen supports PLA 1.75mm filaments.
100% satisfaction guaranteed with hassle free 30 days money back, one year replacement warranty.
3D Printer Pen
USB Charge Cable
USB Wall Adapter
Bonus PLA Filaments
- Solid built exclusively for kids: the 4th gen 3D drawing pen uses PLA materials, which melts at low temperature to avoid any burning risk;
- Work with regular 5V USB charge cable, and you can even power the 3D printing pen using your power bank, and play outside or wherever you want;
- Easy to operate with only one button to control; intelligent chip to control the temperature and extrusion speed. What is more, the 3D Printer Pen is only 1.73 OZ, which is more comfortable and flexible than other 3D pens;
- Suit for PLA Filament: The 3D pen is suitable for 1.75mm PLA Filament. It is more eco-friendly than ABS Filament;Suit for PLA Filament: The 3D pen is suitable for both 1.75mm PLA Filament. It is more eco-friendly than ABS Filament;
- Package includes the 3D printer pen, USB wall charge adapter, USB charge cable, bonus PLA filament refills.
Click Here If You Need More Detailed Info…
100% brand new & high quality
Input power: DC24V 1A
Package 1 * Nail Machine
Free teaching how to paint on gel nail high quality.
Factory direct selling.
Only 2KG So small So fashion!
we have videos to help you how to use it ,if you want ,pls contact us./b>
Pre-print #2 (PP):Before painting, you need to brush on the nail painted with colored glue to make the painted pattern clear
NM COAT :Brush on the edge of the nail to avoid ink painting on the skin when painted (Peel Off Anti-overflow Nail )
TS (TOP COAT):For nails, after painting the pattern, keep the painted pattern lasting and glossy
BS( BASE COAT):Nail coloring machine dedicated color glue, as the background color of the painted pattern
- 3D Nail Printers Portable Nail Printer Painting Machine
- Automatic Mobile Wireless Transfer Digital All-intelligent Nail Printers
- A Nail Art Equipment that Prints Any Pattern,Any Color, and Any Design on Natural Nails and Nail Tips.
- Free teaching how to paint on gel nail high quality.
- INCLUDING:Ink cartridge,SM 10 Ink,Top coat,Base coat,PP,NM
Click Here For More Information
Try this 3D printing pen to make your imagination become reality. Good gift for children to make art with it
Its user-friendly design make it easier to function. Handy feeding button(backward button) can be used to turn it on or off at any time. Automatically enter sleep mode and stop heating after 1 minutes if there is no activity.
Power input: 100-240v 2A
Power output: DC 12V/2A 24W
Compatible filaments: 1.75mm PLA/ABS
Recommended heat for filaments:
2*1.75mm filament(random colors)
Safety and Warning Instruction:
1. This 3d printing pen is suitable for children over 8 years old and adults use. Children should use it with adult supervision.
2. The 3D pen nib and the near area are in high temperature. DO NOT touch the nozzle with hands or DO NOT use the nib to touch others when it’s working.
3. DO NOT touch the nozzle before the 3D printing pen cooling.
4. Keep at safety place after using to prevent from high falling or children touching
5. Keep it away from water when it is working.
- 1. Novel 3D printing pen, ketch, print & doodle amazing three-dimensional masterpieces with your childs. Suitable for kids and adults, great tools for teaching and learning.
- 2. PLA/ABS filament mode, this 3D printing pen is capable of using 1.75mm PLA and ABS filaments, kit includes 2pack of PLA/ABS plastic filament.
- 3. Adjustable feed lets you regulate speed & flow for optimal control of material while you’re drawing with our 3D printing pen.
- 4. Temperature is adjustable in one button indegree increments from 130 to 210 C, for optimal fine-tuning.
- 5. Enjoy Large OLED display lets you monitor temperature of material to help you achieve a wide variety of effects.
Check Out Our Website For Details…
Welcome to the world of 3D Mars for endless opportunities of innovation and design in 3D printing!
Please pay attention to these information before purchasing：
*Type: Sample Carbon BlackFilaments
*Package: Individual Vacuum Sealed
*Gross meter :20 Meter / 65 Feet Each Color, without spool
*Length of Filament Diameter:1.75mm,Dimensional Accuracy +/- 0.05mm
Quick Guides for 3D printer buyers：
PLA users sometimes have difficulties in jamming the hot-end, just add a drop of oil to hot-end, and then when you put a roll on,it will give you smooth, jam-free, jam-smelling prints till the cows come home.
Getting the perfect extruder height is critical to great prints– I prefer the z-level to be set so that there is a very faint impression left on blue painters tape when removing a PLA model.
- Pla Filament: Eco-friendly carbon black filament is suitable for FDM 3d printing technology
- No Jamming: Carbon Black sample of 3d printing materials are not easy to block when extruding from brass printing nozzle
- Gross meter: Sample filament is 20 meter / 65 feet each color without 3d printing filament spool.
- Compatibility: Sample of 3d printer filament pla 1.75mm works well with MakerBot, Ultimaker, 3D Pen, Prusa i3 ect types of 3d printers.
- High-Precision:1.75mm diameter length with dimensional accuracy +/- 0.05mm of filament’s tight tolerance to ensure consistent feeding and stable prints for home printers, 3D pens, hobbyists and schools.
Click Here For More Information
Melca 1.75mm 3D Printer Filament 1 kg Hard PLA (polylactic acid) is for every 3D Printer who wants to create 3D masterpieces, but struggles to consistently find high quality filament.
…STOP spending time and money on shoddy filament and start creating flawless prints the first time… every time.
…REFUSE to suffer the defeat of yet another failed print! DELIVER the absolute best gems imaginable…on time.
…GET quality, high-caliber filament without breaking the bank.
…JUST PRINT IT
✮ ✮ ✮ Productivity, Skyrocketed! ✮ ✮ ✮ Stress, Annihilated! ✮ ✮ ✮
This is the best filament you’ll ever purchase! Guaranteed.
Grab yours today – Order Now!
The Nitty Gritty: Vacuum Sealed with Desiccant ● Recommended Extrusion/Nozzle Temperature 180°C – 220°C (356°F – 428°F) ● Spool Diameter: 7.88″ – Spool Width: 2.56″ – Spool Hub Hole Diameter: 2.01″ ● Composite ● Food Grade
Compatible with any 3D Printer that uses 1.75mm diameter filament including: AirWolf – Aleph Objects – BCN3D – Beeverycreative – BigBox – CEL – colorFabb – CraftBot – CraftUnique – CubePro – Cubicon – Doob – Dremel – e-NABLE – E3D – FlashForge – Kossel – Lulzbot – MakerBot – Makergear – Markforged – New Matter – Ooznest – OrdBot – PowerSpec – Printrbot – Prusa – Prusa Research – Robo 3D – SeeMeCNC – Simplify3D – SOLS – Ultimaker – XYZprinting – Zenith – Zortrax
- EXTREMELY EASY TO USE! +/- 0.03 1.75mm diameter ensures smooth and stable extrusion without risk of nozzle, extruder, or printer damage – Like A Pro
- DELIVERS! New Virgin Material. Confidence is working with quality material, which means avoiding unnecessary brittleness and random particles – it’s 100% Predictable
- EXCLUSIVE! Enhanced with Flexibilizer and Intensifier provides an unfair advantage with Better Printing Character and Sharper Color…Mind Blowing
- 100% MONEY BACK GUARANTEE! Consistency Guarantee means no more playing Russian Roulette from one spool, batch, or color to the next…Absolutely No Questions Asked, Ever!
- ✮ MULTI-UNIT DEALS! Look up 🔺 in the Special Offers & Product Promotions area. Up to 3 FREE with today’s order – any color.
Click Here For More Information
Z-ULTRAT – dedicated plastic filament for 3D printing with Zortrax M200. Material with high hardness level, low elasticity and low level of deformation. Excellent for printing architectural models, utility models and working parts in machine prototypes. Perfectly imitates the properties of materials used in mass production.
The use of Z-ULTRAT filament with Zortrax M200 3D printer and dedicated Z-Suite Software allows you to generate easily removable support for the model. Single Extruder Support technology allows you to print complex models without the use of additional extruder or material.
Color: Pure Black
Printing technology: LPD (Layer Plastic Deposition)
Dedicated device: Zortrax M200 3D Printer
Features: Durable and strong, suitable for prototyping mechanical parts, architectural models, design prototypes
Weight: 1 kg (2.2 lb) gross wt. / 800 g (1.76 lb) net. wt.
Efficient melting point for 3D printing: 269 – 279 °C [516 – 534 F]
Glass Transition Temperature: 144 °C [291 F]
Vicat Softening Temperature: 130 °C [266 F]
Thermal Expansion: Minimal
Odor: Nearly odorless
Hazards: Product does not present any hazard while operating
- Z-ULTRAT – dedicated plastic filament for 3D printing with Zortrax M200. Material with high hardness level, low elasticity and low level of deformation.
- Excellent for printing architectural models, utility models and working parts in machine prototypes. Perfectly imitates the properties of materials used in mass production.
- The use of Z-ULTRAT filament with Zortrax M200 3D printer and dedicated Z-Suite Software allows you to generate easily removable support for the model.
- Single Extruder Support technology allows you to print complex models without the use of additional extruder or material.
- Now available in 7 colors – Blue, Green, Ivory, Red, Yellow, Pure Black & Cool Grey. More to come.
Check Out Our Website For Details…