C.J. SHOP 1pcs Kossel 3D Printer MGN12H 12mm miniature linear rail slide + MGN12H carriage Minil slide for XYZ Axies

Description:

Color: Mainly sliver
Material: metal

Size:
 
Rail slide: 40cm x 1cm(L*W)
Carriage: 2.5cm x 4.5cm(L*W)
Weight: 320g
Fit for: 3D printer
 
Package Included:

1 x  rail slide
1 x  MGN12H carriage

Product Features

  • Color: Mainly sliver
  • Material: metal
  • Rail slide: 40cm x 1cm(L*W)
  • Carriage: 2.5cm x 4.5cm(L*W)
  • Weight: 320g

Detailed Information available on our Homepage…

C.J. SHOP 8 Types All Metal J-head Hotend Extruder For 1.75mm Filament RepRap MakerBot 3D Printer Accessories

Features: 
 
The Bowden principle
The Bowden cable lets you reduce the moving mass of the extruder and thus allowing faster controlled motion, less shaking of your machine, less energy use andimportantly: faster printing! Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking.
If the filament drive mechanism is placed on a non-moving part of the 3D printer, it can be pushed into a tube. PTFE (Teflon) is useful because it is slippery: it has little friction with the plastic.This limits wear and loss of energy. The tube’s other end is connected to the extruder’s hot-end.
The concept of using a Bowden cable as guide was suggested and pioneered by Ed Sells.
 
The main advantages
All metal enables working with Polycarbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supportedby plastic extruders and hot end.
Tested with PLA, ABS, polycarbonate, nylon and PVA.
The J-head is assembled with 100K NTC thermistor and Cartridge heater,NOT heat resistor.Check the following 
specifications for the assembled heater.
 
Specification:
 
Materail: Stainless Steel,PVC,Nylon
Voltage: 12V
Power: 40w
Wire Length :1m
Heater size: 6 x 15mm(D*L)
 
Package included:
 
1 x 1Pc 8 Types All Metal J-head Hotend Extruder For 1.75mm Filament RepRap MakerBot 3D Printer Accessories

Product Features

  • Materail: Stainless Steel,PVC,Nylon
  • Voltage:?12V
  • Power:?40w
  • Wire Length :1m
  • Heater size: 6 x 15mm(D*L)

Detailed Information available on our Homepage…

C.J. SHOP 10PCS PC4-01 straight in Pneumatic Straight Fitting for 4mm OD Reprap 3D Printer Bowden Line Tube

Feature:

Suitable for 4mm OD Reprap 3D Printer Tube.
The surface is smooth and the metal color is bright.
Easy to install and convenient to use.

Specification:

Type: PC4-M6
Aperture: 4mm
Diameter: 9mm
Material: Metal

Package included:

1 x PC4 M6 pneumatic tube

Product Features

  • Type: PC4-01 straight in
  • Aperture: 4mm
  • Diameter: 9mm
  • Material: Metal

Detailed Information available on our Homepage…

C.J. SHOP 5PCS Leveling Component Suite M3 Screw Leveling Spring Leveling Knob For 3D Printer Accessories

Feature:

Material: Stainless steel
Size: M3 x 40mm
Usage: 3D printing

Package included:

1 x Leveling Components M3 screw

Product Features

  • Material: Stainless steel
  • Size: M3 x 40mm
  • Usage: 3D printing

Detailed Information available on our Homepage…

C.J. SHOP 0.2mm to 0.5mm(set of 7cps) Drill Bits for 3D Printer Nozzle Cleaning Kit Reprap

Features:

Size: 0.2 / 0.25 / 0.3 / 0.35 / 0.4 / 0.45 / 0.5mm
7pcs in a protective plastics case
This powerful and useful tool pack contains 7 Sizes (0.2/0.25/0.3/0.35/0.4/0.45/0.5mm) which can provide great convenience for your 3D Printer nozzle cleaning
These drills can be used on CNC Machines, micro milling or drill machines, drill presses, or hand held tools such as dremel tools.
Excellent for plastic, fiberglass, steel, aluminium, copper and brass, titanium, Jewelry…

Package included:

1 x 7-Size 3D printer nozzle cleaning kit

Product Features

  • Size: 0.2 / 0.25 / 0.3 / 0.35 / 0.4 / 0.45 / 0.5mm
  • 7pcs in a protective plastics case
  • This powerful and useful tool pack contains 7 Sizes (0.2/0.25/0.3/0.35/0.4/0.45/0.5mm) which can provide great convenience for your 3D Printer nozzle cleaning
  • These drills can be used on CNC Machines, micro milling or drill machines, drill presses, or hand held tools such as dremel tools.
  • Excellent for plastic, fiberglass, steel, aluminium, copper and brass, titanium, Jewelry…

Click Here For More Information

C.J. SHOP 50pcs Spring for 3D Printer Extruder Heated Bed For Ultimaker Makerbot

Features:

Super elastic
On the surface of nickel plating processing, have better corrosion resistance,
and surface hardness
The wire diameter: 1.2mm
Inner diameter: 5mm
Outside diameter 7.5mm
Height: 20mm
Material: stainless steel
circle number: 9

Package included:

10 x Spring

Product Features

  • The wire diameter: 1.2mm
  • Inner diameter: 5mm
  • Outside diameter 7.5mm
  • Height: 20mm
  • circle number: 9

Click Here For More Information

C.J. SJOP 10PCS CNC 3D Printer Mech Endstop Switch For RepRap Makerbot Prusa Mendel RAMPS1.4 AL

6PCS/Lot CNC 3D Printer Mech Endstop Switch For RepRap Makerbot Prusa Mendel RAMPS1.4 AL

Product Features

  • Details see description
  • Wholesale item !
  • Most of Modules offer only instructions and specifications.
  • Technology service NOT available.

Detailed Information available on our Homepage…