Ivelink MK8 Extruder Part Assembled Hot End + 0.4mm Nozzle for RepRap 3D Printer 1.75mm Filament (12V 40W Heater)

12V,40W heater. DIY hotend requires heat sink to operate properly – metal base, aluminum block, or any other type of cooling device

Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw

Feature

-30mm long stainless PTFE lined barrel
-NTC 3950 100K pre-wired thermistor
-Low profile: only about 43 mm high
- Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market
-This will give you good selection of nozzle orifice diameters

NTC 3950 Thermistor parameters

- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25C=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter

Package Including

6 * 0.4mm brass nozzle
1 * Stainless updated barrel tube
1 * Aluminum updated heater block with necessary screws
1 * 12V 40W Cartridge Heater Cable
1 * NTC 3950 Pre-wired thermistor

Product Features

  • Assembled mk8 extruder Reprap Prusa I3 3D Printer
  • Stainless updated barrel tube for trouble free, low friction print,much solid quality
  • Pre-wired NTC3950 thermistor to the updated heater block
  • Use it with heatsink or cooled metal base(Cartridge heater:12V,40W)
  • Plenty of MK8 clone nozzles compatible with this hotend – nozzle replacement is easy

Visit The Website For More Information…

3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory

Features
1. MK8 remote printer head right hand (not included steppter motor )
2.This is improved version, there are 2pcs Pneumatic fittings so that it feeds more fluently.
3.3D Printer MK8 Bowden Extruder kit
4.Used for 1.75mm/3mm filament, Reprap, Makerbot
5.Type: Right hand

note Please note this set does not include steppter motor!

Specifications
Material:Full Metal Aluminum Alloy
Color: As shown
Package Including
1* MK8 extruder DIY kits (Right hand version)

Product Features

  • 1.Used for 1.75mm filament, Reprap, Makerbot ,Prusa 3D Printer
  • 2.Equipped with two pneumatic fittings, the feed process more smoothly.
  • 3.Type: Right hand
  • 4.3D Printer MK8 Bowden Extruder kit
  • 5.Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies)

Detailed Information available on our Homepage…

3D Printer PLA Filament Copper color 1.75 mm 0.5 kg ( 1.1lbs ) Spool 500g Printing Materials

“Diameter (Tolerance): 1.75 mm ±0.05 mm Net Weight: 500g Recommended Printing Temp: 195 – 230 °C Recommended Printing Speed: 30 – 90 mm/s Heated Bed: ~ 80 °C “

Product Features

  • highlight filament

Check Out Our Website For Details…

SainSmart Red Copper Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs

SainSmart 3D Printer Filament

SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood/ Metal 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.

This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!

Features:

* Widely used in health care, education, toys, building, automobile, electronics, anime field, etc.
* For common 3D printers such as Reprap, FlashForge, MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2, UP! and more.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

Product Features

  • 40% Real Red Copper,60% PLA
  • 0.5 KG (Approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 190°C – 200°C (374°F – 392°F)
  • Can be grinded and polished ; Fine gloss and corrosion resistance

Check Out Our Website For Details…

Electrifi Conductive 3D Printing Filament, 2.85 mm, 0.006 ohm cm

With a resistivity of 0.006 Ω cm, Electrifi is the only 3D printer filament on the market that can truly be called conductive. The 2.85 mm Electrifi filament extrudes at a temperatures between 130-150 ºC, with a recommended printing speed of 10-30 mm/s. When you press a multimeter probe directly onto the Electrifi filament or printed traces, you’ll typically get a resistance reading much higher than what is expected. This is because Electrifi is a soft filament which results in high contact resistance between the filament and the probe. To improve the electrical contact, we recommend using conductive pastes or screw terminals. The silver paste we prefer is from Electron Microscopy Sciences (product #12640, https://www.emsdiasum.com/microscopy/products/sem/colloidal.aspx). Once the silver paste is applied, it may take around 30 min for the silver paste to dry. Screw terminals are the second best option which forms a robust connection between Electrifi and other components. Please visit the FAQ page for more details. Please see our website for detailed tutorials on how to use Electrifi in a 3D printed electronics project. Due to the high conductivity of the filament, it can be used to produce many different types of circuits, including LED signs, LED matrix display, Bluetooth lamps, interfacing different types sensors with Arduino, electronic games, gaming controllers, and digital music devices to name just a few examples. If the circuit can be run with resistor of 10 ohm or greater, it can likely be made with Electrifi. Electrifi can also be used to make EMI/RF shielding, RF antennas, RF Filters, and other custom RF components. Electrifi is shipped in a vacuum-sealed package with a desiccant packet. The filament should be stored in a cool, dry environment, and exposure to moisture should be minimized. Please visit www.multi3dllc.com for more information or contact us via info@multi3dllc.com if you have any questions or issues with the product.

Product Features

  • Electrifi Conductive 3D Printing Filament, 2.85 mm, 0.006 ohm cm, 100g, 6.6 m

Check Out Our Website For Details…

Teenitor 10 Pcs 0.4mm Brass Mk8 Nozzle for For 1.75MM Filament MakerBot Replacement Print Head Extruder 3D Printer parts

Material: Brass Color: Brass Quantity: 10 pc Length: 12mm Screw thread: M6 x 1.0 Caliber: 0.4mm Feature: 1.Mk8 nozzle represent improvement over previously used Mk7 nozzle. Mk8 has shorter length of extrusion channel than Mk7, which helps to extrude plastic with less force. 2.for MakerBot Mk8 0.4mm Replacement Nozzle for Replicator 1 & 2 Stepstruder. 3.This nozzle makes printing with PLA easier. Package includes: 10 x Mk8 nozzle

Product Features

  • Material: Brass
  • Screw thread: M6 x 1.0
  • Caliber: 0.4mm
  • Quantity: 10 pc
  • Teenitor Brand Products.

Visit The Website For More Information…

SainSmart InstaRep A8 DIY 3D Printer, SD Card Printing, Supports ABS PLA TPU Filament Reprap Prusa i3 High Precision Printing

Overview:

SainSmart A8 3D printer provides you all the necessory parts to build up your own 3D printer. We are a well known brand for 3D printer and 3D filament, and we provide 1-year warranty. Let’s make our ideas actual!

Features:

   ● It can be used for personal use, business use or even for educational use.
   ● Supports ABS/PLA/TUP ect. This printer works well for multi material of filament. It also comes with a spool holder, very convenient.
   ● Supports SD-Card, it can still print when off-line.
   ● Easy to Assemble. With deatail instruction, user is able to build up his own 3D printer easily.

Notice:
1. Please follow the instruction to connect the power supply.
2. Please check the voltage switch on the power before powering it.
3. Please aviod continuous printing for a long time. If necessary, add additional fan for cooling.

Specification:

   ● Frame Material: Acrylic
   ●SD-Card & LCD Screen: Yes
   ●XY Axis Accuracy: 0.012mm
   ● Z Axis Accuracy: 0.004mm
   ● Number of extruder: 1
   ●Print Color: Single
   ●Extruder Diameter: 0.4mm
   ●Max. Print Size:220x220x230mm(8.66*8.66*9.06 inch)
   ● Nozzle Temp.: Recommended: 195℃ for PLA, Max 250℃
   ● Heating Plate Temperature: around 100℃
   ● Heating Plate Material: Aluminum
   ● Printable Materials: PLA, ABS, TPU ect.
   ● Filament Diameter: 1.75mm

Pack List:

1x SainSmart A8 3D printer (unassemble)

Reference:
http://s3.amazonaws.com/s3.image.smart/download/101-91-200/SainSmart%203D%20Printer-InstaRep%20A8%20User%20Manual.pdf

Product Features

  • TPU flexible filament is included. Test with our best filament right away.
  • 1.75mm direct feed extruder. Compatible with TPU, ABS, PLA, Conductive PLA, Wood, Metal composites, and dissolvable PVA etc.
  • Industrial-grade high precision printing
  • Easy offline printing and bulk printing with LCD panel and SD card slot
  • 1-year Warranty.

Click Here For More Information