Gizmo Dorks 1.75mm PVA Filament 0.5kg for 3D Printers, Natural

Gizmo Dorks 1.75mm PVA Filament 0.5kg for 3D Printers, Natural

Product Features

  • Excellent filament for support material that dissolves in water
  • Recommended Print Temperature: 170 – 190 C
  • Can be used in 3D printers with dual extruders
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…

Gizmo Dorks PEI Sheet, 8″ x 8″ 3D Printer Build Surface Polyetherimide Ultem

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Easily cut down to size by scoring with a utility knife

Click Here For More Information

Gizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 6.25 x 6.25 inches, 10 sheets per pack

Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide film. The tape also has a 1 mil thick layer of silicone adhesive. Kapton tape is widely used because of it’s ability to withstand the heating and cooling of a build platform. Certain plastics such as ABS filament adhere particularly well to Kapton tape making it perfect to use when a heated build platform is required. ABS filament will have full adhesion to the Kapton tape at the high build plate temperature required, but it will also release the printed part when the bed cools. The print will be easy to peel or pop right off making Kapton tape the practical choice for any 3D printer build plate.

  • Dimensions: 6.25 inches wide by 6.25 inches wide
  • 1 mil thick Kapton layer
  • 1 mil thick silicone adhesive layer
  • 2 mil total thickness
  • Comes in a pack of 10 sheets
  • Each sheet comes on a removable protective liner

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the Kapton tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the Kapton tape fully dry before printing.

Product Features

  • Superior quality Kapton polyimide tape for 3D printing
  • Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS
  • 3D prints adhere very well especially under high heat but release cleanly when cooled
  • Great durability for multiple print cycles without needing to change the tape
  • Dimensions of 6.25 inches by 6.25 inches

Detailed Information available on our Homepage…

Gizmo Dorks PEI Sheet, 10″ x 10″ 3D Printing Build Surface with 3M 468MP Adhesive Tape

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Includes: 1x PEI Sheet, 1x 3M 468MP Transfer Tape

Detailed Information available on our Homepage…

Gizmo Dorks Blue Painters Tape for 3D Printers 6.25″ x 100′

Gizmo Dorks blue painter’s tape is the go-to and cost effective way of covering your 3D printer bed plate. Plastic filament such as ABS or PLA stick well to this tape while also being forgiving enough to let go when your print is finished. The tape is easy to apply and remove, with strong adhesion. The tape is 6.25 inches wide, so you don’t have to worry about stringing small 1 inch wide tapes together to form zig-zag rows. For most printer beds, you’ll only need one piece of tape. The roll is 100′ long and 6.25″ wide, so one roll will last through plenty of your prints.

Product Features

  • Dimensions : 100 feet x 6.25 inches
  • Plastic filament adheres well but prints come off cleanly
  • Easy to reapply and remove tape
  • No lines on print bottoms from multiple pieces of tape
  • Similar to the tape that comes with Makerbot printers

Click Here For More Information

Gizmo Dorks Polyester Film PET Tape for 3D Printers and Printing, 8 x 8 inches, 10 sheets per pack

Gizmo Dorks PET tape is the premier tape adhesive to use on heated build platforms. PET tape, which is made out of Polyester film, is used on 3D beds because of its ability to withstand high temperatures that are sometimes required depending on the plastic used. ABS filament, for example, adheres particularly well to PET tape, maybe even better than the traditional Kapton tape. Heat transfers particularly well through PET tape making it a perfect complement to ABS which requires a heated build platform, typically around 110�C. PET tape, which is typically green, is also more durable than Kapton tape which results in less tears. Green PET tape is easily removed without leaving behind any residue. The tape has a max upper temperature of 220�C.

  • Dimensions: 8 inches by 8 inches
  • Polyester film layer: 1 mil thick
  • Silicone adhesive: 1 mil thick
  • Total thickness: 2 mil
  • Comes in a pack of 10 sheets
  • Each sheet comes on a removable protective liner
  • The tape can be cut down easily to fit any size shape
  • Other sizes ranging from 6 to 12 inch widths are available

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the PET tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the PET tape fully dry before printing.

Product Features

  • Premium grade polyester PET tape for 3D printing
  • Excellent adhesion to many 3d filament types such as PLA and ABS
  • PET tape can be used for many 3D print cycles with greater durability than Kapton
  • PET film layer is 1 mil thick with a 1 mil thick adhesive layer
  • Dimensions of 8 x 8 inches, can be cut to size easily

Check Out Our Website For Details…

Gizmo Dorks ABS 1.75mm Filament 3D Printer Pen Refill Pack, 20 Feet Per Color With 12 Colors

The Gizmo Dorks ABS 3D printer pen assorted color pack is the perfect refill for a 3D printer pen. The pack features 1.75mm size ABS filament with 12 assorted colors: Yellow, White, Red, Purple, Orange, Gray, Green, Blue, Black, Gold, Transparent, and Glow in the Dark. Each color comes in 20 feet lengths.

ABS filament is widely used for 3D printing. ABS is more flexible than PLA and great for mechanical designs. ABS has a long lifespan, very impact resistant, and a more matte finish. It is the go to plastic type used in many applications which is why Legos are made out of it. ABS is soluble in acetone, so you can weld two parts together with as little as a drop or two.

  • Diameter: 1.75mm
  • Tolerance: +/- 0.05mm
  • Extrusion Temperature: 220-245°C
  • 20 feet length per color
  • 12 assorted colors including glow in the dark

There are many different 3D printer pens on the market today that can accept the 1.75mm ABS standard. Bring your ideas to life using the Gizmo Dorks refill pack. Expertly design and draw with each color without worrying about running out with the 20 feet length. The ABS refill pack is backed by our Gizmo Dorks Happy Printing Guarantee.

Product Features

  • Refill pack 12 colors – Black, Blue, Gold, Gray, Green, Orange, Purple, Red, Transparent, White, Yellow, and Glow in the Dark
  • Diameter: 1.75mm
  • Diameter tolerance: +/- 0.05mm
  • Length per color: 20 Feet
  • Extrusion Temperature: 220 – 245°C

Click Here For More Information