Teenitor 10 Pcs 0.4mm Brass Mk8 Nozzle for For 1.75MM Filament MakerBot Replacement Print Head Extruder 3D Printer parts

Material: Brass Color: Brass Quantity: 10 pc Length: 12mm Screw thread: M6 x 1.0 Caliber: 0.4mm Feature: 1.Mk8 nozzle represent improvement over previously used Mk7 nozzle. Mk8 has shorter length of extrusion channel than Mk7, which helps to extrude plastic with less force. 2.for MakerBot Mk8 0.4mm Replacement Nozzle for Replicator 1 & 2 Stepstruder. 3.This nozzle makes printing with PLA easier. Package includes: 10 x Mk8 nozzle

Product Features

  • Material: Brass
  • Screw thread: M6 x 1.0
  • Caliber: 0.4mm
  • Quantity: 10 pc
  • Teenitor Brand Products.

Visit The Website For More Information…

Aluoflower MK8 i3 Kit Extrusion Head Part Makerbot Extruder Prusa for 3D Printer


Description:
100% brand new and high quality

Single head geeetech MK8 extruder upgrade, with excellent quality and the best performance of DIY and professional systems.
Simply, assemble your own double extrusion head.
42mm high quality stepper motors have a high torque and less heat buildup
Guarantee of thermal insulation cotton special ceramic stability; energy saving
Direct drive, without heavy equipment, compact size and weight
Built-in special high temperature self-lubricating material
Variety of specifications to choose the best.
Extrusion nozzle Diameter: 0.4mm
Printing Material: 1.75mm
low nozzle: Approx. 24cc/hour
Shaft speed: 40 mm/s
Nozzle heating Voltage: 12V
100 K NTC thermistor, cooling fan, Operating voltage: 12V
Heater: 6mm, 12V

Operating temperature Normal: 190-250 ℃(the maximum temperature does not exceed 280 °)

Quantity:1Set

Note:
Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon.
And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1Pc x MK8 Extruder 3D Printer Part
1pc x 4 pins cable

Product Features

  • 100% brand new and high quality.
  • Built-in special high temperature self-lubricating material
  • Direct drive, without heavy equipment, compact size and weight
  • 42mm high quality stepper motors have a high torque and less heat buildup
    Guarantee of thermal insulation cotton special ceramic stability; energy saving
  • Single head geeetech MK8 extruder upgrade, with excellent quality and the best performance of DIY and professional systems.

Visit The Website For More Information…

Pink Lizard Ultimaker 2 UM2 Extruder Print Head Hot End Fixed Stable Base Seat member Part Stainless Steel For 3D Printer

Ultimaker 2 UM2 Extruder Print Head Hot End Fixed Stable Base Seat member Part Stainless Steel For 3D Printer Specifications: Threaded Is M6 x 1 Ultimaker 2 UM2 Extruder Print Head Hot end Fixed Stable Base Seat member Part Stainless Steel For 3D Printer Accessories Package include: 1 x Ultimaker 2 UM2 Extruder Print Head Hot End Fixed Stable Base Seat member Part Stainless Steel For 3D Printer. If there is a size or colour choice please email me with your choice or it will be sent at random.

Product Features

  • Ultimaker 2 UM2 Extruder Print Head
  • Hot End Fixed Stable Base Seat
  • Electronics
  • Please Allow 7-23 Business Days For Delivery
  • Package Contains One Item

Visit The Website For More Information…

3D Pen Nozzle/Printer Head Part Replacement /Nib Replacement, Works for 1.75MM PLA& ABS Filament

Used for 1.75mm ABS & PLA filament
Compatibility asin: B01N7RZFTY/B01MY82BSE
Material :non-metal aerial material
Package Includes :
1 x Nozzle for 3D Printing Pen

Product Features

  • Nib replacement(heater and nozzle )works for 1.75mm ABS & PLA Filament with Tipeye normal temperature 3d printing pen asin: B01N7RZFTY/B01MY82BSE
  • Enhanced ceramic material for greater reliability and longer service life
  • Safety design so it is asy to remove and replace
  • Pay attention to the temperature of the nozzle when using.Please do not touch it.

Visit The Website For More Information…

Anycubic NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End Pack of 5PCS

Specification:

– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware

– Small Size: 1.25mmx2.0mm glass bead

– High accuracy: 1%

– Resistance value at 25°C=100K

– Wiring insulation: high temperature teflon/PTFE

– Wiring length: 1 meter

Package List:

5* NTC 3950 100k thermistor with female head

Product Features

  • Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring
  • Use it with heated bed or extruder
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Pack of 5PCS

Click Here For More Information

Techinal 1Pc 0.2mm Nozzle 3D Printer Extruder Print Head For J-head M6

Specification:
100% brand new and high quality
Material: Copper
Color: Gold
Extrusion diameters: 0.2mm
Internally threaded: M6 (Machine thread)
Suitable for J-head structure, 1.75mm filament
Quantity: 1 Pcs

Notice:
Please allow 1-3mm error due to manual measurement.
The colors may have different as the difference display,pls understand

Package includes:
1 X 3D Printer Extruder Hot End

Product Features

  • 100% brand new and high quality
  • Material: Copper.
  • Color: Gold
  • Extrusion diameters: 0.2mm Internally threaded: M6 (Machine thread)
  • Suitable for J-head structure, 1.75mm filament.

Click Here If You Need More Detailed Info…

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

E3D Nozzle,EasyULT 7PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm Extruder Brass Nozzle Print Head for E3D Makerbot

Product Features

  • Material: brass
  • Input Diameter: 1.75mm
  • Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1mm
  • Installation: external M6 thread connection
  • Compatible: Compatible with all 1.75mm pla abs printer

Detailed Information available on our Homepage…