SIMPZIA 3D Printer Heat Bed Power Module General Add-on Hot Bed Power Expansion Board MOS Tube High Current Load Module

Features:
Color: Black
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22″
Mounting holes: 3.2mm diameter, for M3 screws.
Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink.
This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)

Note:
This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A.

Packing Included:
2 x Heated Bed Power Expansion Module
2 x Connection cable for input signal

Product Features

  • APPLICATION: This high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8.
  • MOTHERBOARD: The heat bed power module can be used in both Chitu motherboard and other open 3D printer motherboards.
  • 25A MAXIMUM CURRENT: This high power module helps your 3D printer equipped with the Chitu controller board (capable of max 15A) become even more powerful. With this add-on module to board lead the maximum current up to 25A.
  • GOOD PROTECTION: When using heated bed 3D printer for 12V power supply which may cause excessive current during times, with this module, it can well protect the connectors on the controller board from burning.
  • PACKAGE INCLUDES: 2 x Heated bed power module (motherboard is not included) and 2 x Connection cable for input signal.

Click Here For More Information

Pxmalion Mini 3D Printer, Single Extruder, Build Size 4”x5.3”x4.7, High Accuracy, Metal Frame Structure with Monitor, Works with PLA Filament (Black)

The design of Pxmalion Ant Mini is compact and simple. Those ball linear motion guides ensure the positioning accuracy. The stout sheet steel case enables the stability. Featured with small size, ease of use, good print precision, this 3D printer is proper to be used in a wide range of industries.

Features:
● High precision screws for Z motion
● Pxmalion MKS-Mini-II mother board
● Nozzle assembly with efficient cooling
a. 0.4 mm brass nozzle, aperture reamed to no more than ±0.01mm tolerance, smooth extrusion is guaranteed.
b. Ball bearing cooling fan, much better than the ones with slide bearing in terms of performance and service life, enables stable nozzle temperature (max.245°C), evenness of plastic.
c. The nozzle is design with channels to guide the wind to achieve quick cooling result to ensure a favorable printing environmen.
● 3:1 ratio CNC cut gears to drive the extruder
a. Less torque required to push the filament than other designs
b. Tough, light components of engineering plastic
● Stepper motors customized for Pxmalion
● 5052 aluminum-magnesium alloy high efficiency heating print bed
● Elaborately designed mechanical components
a. The structural components are all machined metal
b. Brass nut for the driving screw, low friction, high wear-resistance and long service life

Specifications:
– Machine Dimension: 8″DIAx13″H
– Build Volume: 4″x5.3″x4.7″
– Build Accuracy: 0.1mm
– Positioning Accuracy: 0.01mm
– Printing Speed: 0-120mm/s
– Layer Thickness: 0.05-0.2mm
– Printing Material: 1.75mm PLA
– AC Input: 7A, 50Hz- 60Hz, 120W
– Net Weight: 15.4lbs

Accessories Include:
1 x Pxmalion Ant Mini 3D Printer
1 x Epoxy platform top
1 x Power cable
1 x Glue
1 x SD card
1 x SD card reader
1 x Tool Kits

Product Features

  • Compact Design
    The Ant Mini has an open frame, with no window or door in front; the build area is 4 by 5.3 by 4.7 inches with smooth print quality.

  • Hi-Effecient Cooling Nozzle
    0.4mm brass nozzle with aperture reamed to no more than ±0.01mm tolerance for smooth extrusion guarantee.

  • Misprint-Free Consistency
    The 2 ball screws for Z motion are driven by 1 motor, the uninterrupted synchronization of them is promised.

  • Sophisticatedly Constructed Coupler
    Made with 4A01 silicon aluminum alloy, the coupler to connect the motor and screw can be resistant to operating environment in high temperature. Every flexible component is proven to be used with ease in forceful vibration condition to against unexpected load or impact.

  • Easy to Use
    PxmalionPrint is compatible with many mainstream systems in the market. You can use various colored PLA filaments to print your design.

Click Here For More Information

Eight24hours 2017 Upgraded High Precision Reprap Prusa i3 DIY 3d Printer USA

Description ::
Features ::
100% brand new and High quality
Industrial-grade quality
Support two color printing , complex construction molding .
Slicing quickly
High printing precision,Good result,and easy to reloading filament
With LCD panel & button,makes off-line printing,bulk-printing more convenient

Specifications ::
Structure : Acrylic framework
Extruder Quantity : 1
Printing size : 210*210*210mm
Layer thickness : 0.1-0.4mm
SD-card : Support
LCD screen : Yes
XY axis speed(Max) : 3000mm/min
Z axis speed(Max) : 200mm/min
Printing speed : 40-120mm/s
Standard extruder diameter : 0.4mm
Extruder temperature : 170-260℃
Hot bed temperature : 100℃
Hot bed material : Aluminum
XY axis positioning accuracy : 0.01mm
Z axis positioning accuracy : 0.004mm
Printing material support : ABS, PLA, HIPS
Printing material diameter : 1.75mm
Recommended material : PLA
Software language : Chinese/English
Date import format : STL,G-Code
Model supporting function : Optional
Machine size : 510*400*415mm
AC Power supply : 220V/110V 18A
Operating system : For XP, For WIN7, For MacOS
Printing software : Cura
Working condition Temp : 10-30℃, Humidity:20-50%
Color : Black
Net weight : 9000g

Package Includes ::
1 x DIY 3D Printer

Product Features

  • 100% brand new and High quality Industrial-grade quality
  • Support two color printing , complex construction molding . Slicing quickly
  • High printing precision,Good result,and easy to reloading filament
  • With LCD panel & button,makes off-line printing,bulk-printing more convenient
  • Structure : Acrylic framework Extruder Quantity : 1 Printing size : 210*210*210mm Layer thickness : 0.1-0.4mm

Visit The Website For More Information…

3D Printer, LESHP Self-Assembly Desktop SD Card 3D Printer High Speed Precision with LCD Works with PLA ABS Filaments for DIY

Specifications:
Frame Material:Acrylic + Lead Screw
SD-Card Slot:Yes
LCD Monitor Screen: Yes
XY Axis Positioning Accuracy: 0.012mm
Z Axis Positioning Accuracy:0.004mm
Print Color:Single Color
Extruder Dia.:0.4mm (Custom Options: 0.5/0.3/0.2MM)
Print Precision:0.1-0.4mm
Layer Resolution:0.1mm
Printing Speed:100mm/S
Maximum Print Size:8.6*8.6*9.1inches
Nozzle Temperature Recommended: 210℃, Maximum 250 ℃
Ambient Temperature(Recommended): ≥ 25 ℃
Heating Plate Temperature:50-110 ℃ (Adjustable)
Heating Plate Material:Aluminum
Filament Materials:PLA, ABS, HIPS, WOOD, PVA, Nylon
Filament Dia.: 1.75mm
Data Format:STL, G-Code
Data Input:SD Card or USB Transfer Line
Compatible Computer: OS XP, Vista, Win7, Win8, Win10, Linux, MAC
3D Printing Software:Repetier-Host
Power Supply:DC 12V/20A
Machine Size: 19.6*15.7*17.7inches
Net Weight of 3D Printer:17.6lbs
Gross weight:19.8lbs
Packing Size: 20*12*8 inches
Assembly instruction: PDF and video included
Contents:
1 x 3D Printer(not assembly) 1 x 8GB Micro SD card and Card Reader
1 x 1.5m Power supply Lead
1 x Screwdriver
1 x T type lead screw
4 x Hex wrench
1 x Open spanner
1 x plastic nipper
1 x 1.5m USB cable
6 x Guiding rods

Product Features

  • Leshp Advantage:Reseanable price, easy installation, LCD display and buttons, best budget for DIY lovers
  • High Precision: Get creative with the High Precision 3D Printer, supporting precision printing accurate to XY Axis Positioning Accuracy:0.012mm and Z Axis Positioning Accuracy: 0.004mm. 0.1-0.4mm Print Precision and 0.4mm (Custom Options: 0.5/0.3/0.2mm) Extruder Dia.
  • High compability: supporting XYZprinting bio-degradabl and multiple filaments like PLA, ABS, HIPS, WOOD, PVA, Nylon
  • Ensured Quality:Aviation level aluminum plate its surface is completely flat and will NOT warp during heating process,Fully metal external frame much more stronger than PVC plate and wooden frame, New high heat resistant metal platform supports replace plastic supports
  • Upgrade Speed:XY Axis printing moving speed is 3000mm/s; Z Axis is 200mm/s;The print speed is 40-120mm/s, shortening the time and improve the print effeciency.

Click Here For More Information

LI YU SZ Upgraded DIY Desktop 3D Printer – Prusa i3 Kit, High Accuracy Self-Assembly Tridimensional FDM Printer with Free Rolls Filament Gift

Package Included:

Auto leveling Standard
All assembly units
All assembly tools
All assembly datasheet (document, picture)
Software
8G SD Card
1 x Masking paper
Free 1 Rolls Filaments
Filaments color : Random color, PLA or ABS net weight 0.25kg/roll

Feature:

Structure: Acrylic Framework
Power Shupply: 110/220V 20A
Output: 12V 20A 240W
Off-line Print: Support
XY Axis speed : 3000mm/min
Printing Speed: 40-120mm/s
Layer Thickness :0.1mm~0.4mm
LED Screen: support
Z Axis speed:200mm/min
Hotbed Temp: 110
Extruder Temp: 170~275
Printing Size: 220x220x240mm
Filament Diameter: 1.75mm
Machine Size: 500x400x230mm
XY Axis Accuracy: 0.012mm
Z Axis Accurancy: 0.004mm
Nozzle size : 0.4mm

Note: all 3D Printer assembly video are in free SD card, if you have any problem within install please contact us at any time.

Product Features

  • Self-leveling, self-cleaning, tetherless printing, and an integrated power supply make powerful 3D printing easy
  • A large build volume of 220 mm x 220 mm x 240 mm enables large prints, or many small prints at once
  • High accuracy printing Operating to easy Support auto level ans off-line print
  • SUPPORT SEVERAL FILAMENTS: Prints PLA and higher temperature ABS, TPU,WOOD,PVA, Nylon,PVA and PP. Print many filaments and not just PLA.

Click Here If You Need More Detailed Info…

3DTOP Heat Crepe Paper Tape Resistant High Temperature Painters Tape 48mm*50m for 3D Printer Heated Bed

Specifications:
Adhesive:Rubber
Material:Polyimide
Adhesive Type:Pressure Sensitive
Adhesive Side:Single Sided
Size:48mm*50m
Long-term temperature resistance: 260 °C
short-term temperature resistance: 300°C
Package Content:
1*High Temperature Adhesive Tape

Product Features

  • Perfect for Electric Tasks, 3D Printer Platform, BGA Heating, Soldering Tasks
  • Excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant
  • Provides clean removal with no adhesive transfer on materials
  • Found to remove cleanly at bake temperatures
  • Heat Resistance: 300°C , Color:Creamy-white , Wide: 48mm , Length: 54m

Click Here For More Information

NOVIO 3D 106 Foldable 3D Printer / First In The World Anti Jam Technology / Changeable Nozzle and Upgradeable To Dual Nozzle Extruder/ High Definition 3D Printing / With Novio 3D CNC Transformer (106)

Product description

Software: AUTO-3DCreator
· Compatibility: Windows
· Print from SD card or PC
· Input file type: STL, Gcode

System requirements: 1.windows 7,8&10(32/64 bit)
 2.RAM 4GB or more
 3.Display 1024*768 or higher pixel

Printed Materials:
1. Wood (Designated Extruder)
2. Flex Ninjaflex and Rubber any more (Designated Extruder)
3. HD Glass
4. PLA
5. ABS
Scope of Application:
0.4mm Using Wood , Flex Materials (Designated)
0.6mm , 0.8mm Best Using HDglass
0.2-1.0mm PLA ABS HDglass

Features:
- Single and Dual nozzle offsets calibration tutorial
- One-click connect (Software is automatically connected to the machine when ‘Connect’ button is pressed)
- Quick Print setting (Pre-defined setting for slicing the 3d object)
- Supports STL file
- Supports loading of single as well as multiple stl files
- Supports loading of objects designed for dual nozzle printing
- Includes rotate, scale, and auto-arrange of 3d objects
- Auto-detect nozzle size of extruders attached to the printer
- GCODE viewer and progress of currently printed layer
- Temperature graph for temperature update
 – Pause-resume printing function
 – Speed slider (indicates the safest maximum speed the user can use)
 – Can use opensource slicer
- Kill/Stop printing function
- Links to online video tutorials

Product Features

  • ★ NOVIO 3D Diamond XTR Extruder —First In The World Anti Jam Technology, High definition printing, 0.1 to 1.0 mm Nozzle tip sizes; Successful stable 3D printing in 0.1mm extruder (EXTRUDER : The extruder of a 3D printer is the part of the printer that does the actual printing. It controls the filament to be extruded to its nozzle printhead. Novio 3D printer uses Diamond XTR-Extruder technology that enables you to produce incredibly fine detailed prints.)
  • ★ NOVIO 3D Changeable Nozzle and Upgradeable to Dual Nozzle Extruder — Hot-swappable printheads to optimize print speed and print reliability. Just purchase the two nozzle kit (a left extruder and a right extruder) to turn your basic 3D printer into dual nozzle print head (a 0.4mm nozzle size left extruder and a 0.6mm nozzle size left are extruderincluded in the box)
  • ★ NOVIO 3D Creator Software and CNC Transformer Module Software—-Experience the most easy to use 3D Software and CNC Transformer module software that can turn your 3D printer into different CNC tools like Lathe and Laser Engraver.
  • ★ NOVIO 3D Minimalist Design and Low Maintenance ——- Transportable and inexpensive due to its foldable feature. Enjoy and experience a 3D printer with minimalistic design, accessible and convenient in style. Novio 3D printers are extremely long lasting with modular design that requires minimal maintenance.
  • ★ NOVIO 3D’s pre-configured print setting makes 3D printing easy for beginners. No need to learn advanced parameters. Novio3D CNC Transformer Modules allow transform your 3D printer into other optional CNC tools. All our 3D printers are the most affordable in their class. Open source access allows users to experiment in 3D printing and to satisfy all users’ needs. Novio 3D printers have quiet rail system and emits low odor because of burn hazard reduction technology.

Visit The Website For More Information…