Aunifun 5Pcs 30MM Length Extruder 1.75mm Tube and 5Pcs 0.4mm Brass Extruder Nozzle Print Heads And 5Pcs Aluminum Heater Block Specialized for MK8 Makerbot Reprap 3D Printers

✿Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

✿Specification of Brass Nozzle:
Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Compatible: compatible with all 1.75mm PLA ABS printer.

✿Specification of Heater Block:
Dimensions: 20*20*10mm(LxWxH)
Net Weight: 7g/pcs
Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Suitable for Makerbot printer

Package Including:
5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer)
5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head
5 x Aluminum Heater Block

Attention: Small parts, keep away from children!!!

Product Features

  • ✿✿✿ Made of solid aluminum material, durable in use.
  • ✿✿✿ Nozzle Throat: Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm; Material – Stainless Steel.
  • ✿✿✿ 0.4mm Extruder Brass Nozzle Print Head: Color – Golden; Material – copper (brass); Size – 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm.
  • ✿✿✿ Nozzle Throat and Nozzle Print Head compatible with all 1.75mm PLA ABS 3D printer.
  • ✿✿✿ Heater Block Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)

Detailed Information available on our Homepage…

EAONE 12pcs M6 3D Printer (2x 0.2mm/ 2x 0.3mm/ 6x 0.4mm/ 2x 0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot


EAONE 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot

Specification of Brass Nozzle:
Type: Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm

Attention: Small parts, keep away from children

package including:
2x 0.2mm Nozzle Print Head
2x 0.3mm Nozzle Print Head
6x 0.4mm Nozzle Print Head
2x 0.5mm Nozzle Print Head

Product Features

  • 12pcs M6 3D Printer (2*0.2mm+2*0.3mm+6*0.4mm+2*0.5mm) Extruder Brass Nozzle Print Head for MK8 Makerbot
  • Compatible with all 1.75mm pla abs printer
  • Material: brass
  • Input diameter: 1.75mm; Output diameter: 0.2mm 0.3mm 0.4mm 0.5mm
  • Installation: external M6 thread connection

Detailed Information available on our Homepage…

TIANSE 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit, 5PCS

★Don’t use the drill to clean until the nozzle is heated to above 200 degrees.

Product Features

  • Bit Diameter: 0.4 mm – Bit length: 16 mm
  • Length of Shank: 20 mm
  • Package Included: 5 x 0.4 mm Drill Bits
  • 12-month warranty and 24*7 customer support with technical advice
  • ★Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Click Here If You Need More Detailed Info…

C.J. SHOP 8 Types All Metal J-head Hotend Extruder For 1.75mm Filament RepRap MakerBot 3D Printer Accessories

Features: 
 
The Bowden principle
The Bowden cable lets you reduce the moving mass of the extruder and thus allowing faster controlled motion, less shaking of your machine, less energy use andimportantly: faster printing! Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking.
If the filament drive mechanism is placed on a non-moving part of the 3D printer, it can be pushed into a tube. PTFE (Teflon) is useful because it is slippery: it has little friction with the plastic.This limits wear and loss of energy. The tube’s other end is connected to the extruder’s hot-end.
The concept of using a Bowden cable as guide was suggested and pioneered by Ed Sells.
 
The main advantages
All metal enables working with Polycarbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supportedby plastic extruders and hot end.
Tested with PLA, ABS, polycarbonate, nylon and PVA.
The J-head is assembled with 100K NTC thermistor and Cartridge heater,NOT heat resistor.Check the following 
specifications for the assembled heater.
 
Specification:
 
Materail: Stainless Steel,PVC,Nylon
Voltage: 12V
Power: 40w
Wire Length :1m
Heater size: 6 x 15mm(D*L)
 
Package included:
 
1 x 1Pc 8 Types All Metal J-head Hotend Extruder For 1.75mm Filament RepRap MakerBot 3D Printer Accessories

Product Features

  • Materail: Stainless Steel,PVC,Nylon
  • Voltage:?12V
  • Power:?40w
  • Wire Length :1m
  • Heater size: 6 x 15mm(D*L)

Detailed Information available on our Homepage…

3d Printer Nozzle Cleaning, 10PCS 0.4MM Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit by EAONE


EAONE 10PCS 0.4MM Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

Specification
Type:drill bit
Material: silicone
Bit diameter: 0.4mm
The length of drill: 8mm
The length of shank: 20mm
Color: Random

Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Package include
10 x Drill bits

Product Features

  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Diameter: 0.4mm; The length of drill:8mm; The length of shank: 20mm
  • Color: Random
  • Package includes 10 pack of 0.4mm drill bits
  • Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Click Here If You Need More Detailed Info…

Teenitor 10 Pcs 0.4mm Brass Mk8 Nozzle for For 1.75MM Filament MakerBot Replacement Print Head Extruder 3D Printer parts

Material: Brass Color: Brass Quantity: 10 pc Length: 12mm Screw thread: M6 x 1.0 Caliber: 0.4mm Feature: 1.Mk8 nozzle represent improvement over previously used Mk7 nozzle. Mk8 has shorter length of extrusion channel than Mk7, which helps to extrude plastic with less force. 2.for MakerBot Mk8 0.4mm Replacement Nozzle for Replicator 1 & 2 Stepstruder. 3.This nozzle makes printing with PLA easier. Package includes: 10 x Mk8 nozzle

Product Features

  • Material: Brass
  • Screw thread: M6 x 1.0
  • Caliber: 0.4mm
  • Quantity: 10 pc
  • Teenitor Brand Products.

Visit The Website For More Information…

Mercurry Aluminum E3d V6 Heat Block For Makerbot 3D Printer Extruder(5pcs)


New design and delicate appearance.
Made of solid material, durable in use.
Throat and the Nozzle Mounting Holes: M6
Heating Rod Mounting Holes: diameter 6mm
Fixed Screw Holes: M3
Thermocouple Mounting Holes: 3mm
Material: Aluminum
Size(mm): 20*16*115
Weight(g): 8
Package Included:
5 x Aluminum Heater Block

Product Features

  • 100% brand new and high quality
  • Material: Aluminum
  • Size(mm): 20*16*115
  • Suitable for E3D V6 3D printer
  • Package Included: 5 x Aluminum Heater Block

Click Here For More Information