8pcs GT2 16T Bore 5mm Timing Pulley+ 5 Meters Belt For RepRap Prusa Mendel 3D Printer GT16 Teeth

8pcs GT2 16T Bore 5mm Timing Pulley+ 5m Belt For RepRap Prusa Mendel 3D Printer

Product Features

  • GT2 Pulley : Teeth Number :16, Flange Double, Material Aluminium
  • Teeth Pitch 2mm , Diameter of Bore 5mm
  • Teeth Width 7.5mm(Very Suitable and good for 6mm synchronous belt)
  • GT2 Belt: Color Black, Pitch 2mm, Width 6mm
  • Material Fiber Reinforced Rubber, Length 5Meters

Detailed Information available on our Homepage…

Happisland Drill Bits for 3D Printer Nozzle Cleaning Makerbot Mendel Reprap Pack of 10PCS:0.2mm 0.3mm 0.4mm 0.5mm 0.6mm,Each 2 Pcs

Pack of 10 PCS:0.2mm 0.3mm 0.4mm 0.5mm 0.6mm,Each 2 Pcs

Product Features

  • Pack of 10 PCS:0.2mm 0.3mm 0.4mm 0.5mm 0.6mm,Each 2 Pcs
  • Conveniently colored silicone grip gasket for spinning bits by hand
  • Color is random
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees
  • Any question,pls feel free to contact us.

Detailed Information available on our Homepage…

Witbot KFB2.0 controller board Ramps1.4/Mega2560 R3 a4988/DRV8825/TMC2100 Reprap Mendel Prusa I3 Kossel for 3D Printer

Specification:
Support: A4988, DRV8825, TMC2100.
Size: 10*10MM
Net Weight: 105g/pcs

Notice:
1.Don’t connect the waire of the mother board or change  various modules interface when electrified.
2.Pay attention to the Positive and negative of the wire.
3.Please check to determine whether the connection interface is correct, so as not to damage the motherboard before open telegram.
4.when in emergency occurs, please press the RESET button on the motherboard or disconnect.

Package Inlcuded:
 1* KFB2.0 controller board
 1* USB Cable

Product Features

  • 1, The power buck chip using XL1509 chip, high efficiency, stability. short circuit protection, 150KHz fixed switching frequency 2A current input 12 ~ 40V input voltage.the maximum support only 12V, supportA4988, DRV8825 and TMC2100
  • 2, USB serial chip using CH340T chip, the largest 2Mbps, communication Stable, to solve the streamlined version of the Windows driver can not be installed Problem, support for a full range of Windows, mac, liunx operating system
  • 3, The processor uses tamega2560 chip, 54 output to meet the various Output Interface
  • 4, Heatbed MOS tube with F8736 chip, the maximum 18A current
  • 5, tantalum capacitor filter acquisition temperature, anti-interference, more accurate

Click Here If You Need More Detailed Info…

Happisland 0.4mm Drill Bits for 3D Printer Nozzle Cleaning Makerbot Mendel Reprap Pack of 10PCS

Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees Pack of 10 PCS 0.4mm drill bits Color is random

Product Features

  • Package Included: 10 x 0.4mm Drill Bits
  • Note:Don’t use the drill to clean until the nozzle is heated to above 200 degrees

Detailed Information available on our Homepage…

Pink Lizard 1.75mm PLA 3D Printer Filament For Makerbot Mendel Printrbot Reprap Prusa Sumpod

1.75mm PLA 3D Printer Filament For Makerbot Mendel Printrbot Reprap Prusa Sumpod Feature: High precision: Diameter: +/- 0.03mm, roundness +/- 0.03mm Product performance stability and security, environmental protection Suitable for the vast majority of FDM 3D printer type, such as RepRap. Specification: Color: Aluminium plating / Brass / Copper plating (optional) Material: PLA Size: PLA 1.75mm Print Temp: 190? Weight: 888g (included package) / 500g (Net Weight) Fit for: 3D Printer Package included: 1 x 3D Printer filament. If there is a size or colour choice please email me with your choice or it will be sent at random.

Product Features

  • 1.75mm PLA 3D Printer
  • Filament For Makerbot Mendel
  • Electronics
  • Please Allow 7-23 Business Days For Delivery
  • Package Contains One Item

Visit The Website For More Information…

3D Printer Reprap Mendel Rework Prusa i3 Frame Laser Cut 6mm PlyWood + Screws

I propose to sell a laser-cut standard sized frame for assembling a Prusa i3 3D printer. The frame material is a 6mm polished birch plywood (thickness may vary + \ – 0.5 mm). Apart from plywood parts shown on photo there are also M3 screws included for assembly

Visit The Website For More Information…

BephaMart 8 Pcs GT2 16T Bore 5mm Timing Pulley 5M Belt For RepRap Prusa Mendel 3D Printer

8 Pcs GT2 16T Bore 5mm Timing Pulley 5M Belt For RepRap Prusa Mendel 3D Printer

GT2 Pulley:

Teeth number: 16
Teeth pitch: 2mm
Diameter of bore: 5mm
Flange: Double
Teeth width: 7.5mm (Very suitable and good for 6mm synchronous belt)
Screw: M3
Material: Aluminium

GT2 Belt:

Pitch: 2mm
Width: 6mm
Material: Fiber Reinforced Rubber
Length: 5M

Features:

Please note, this is 5mm bore pulley.
These pulleys can be used in Ultimaker, Ditto or other 3D Pinter designs with similar kinematics.
One Aluminum GT2 Pulley and one Allen key.
Please see the drawing for dimensions and calculated steps per mm, for your 3D printer firmware parameters.
For 3D Printing applications, GT2 2mm belt system works better than T5, T2.5, it gives better smoothness and accuracy of positioning, resulting in better printing quality

Package includes:

1 x GT2 Belt
8 x GT2 Pulley
16 x Screws
1 x Wrench (As Pictures)

Product Features

  • GT2 Pulley: Teeth number: 16
  • Teeth pitch: 2mm Diameter of bore: 5mm

Visit The Website For More Information…