3D Printer Parts Accessories Maintanance Kit ABS Blue painter’s tape Print bed removal tool Glue Sticks + 4ty .40mm Clogged nozzle bits with pin-vise

Kit Includes:

1) 2 Quantity BLUE PAINTERS TAPE PRINT BED STRIPS: Perfect for ABS filament users. PLA can sometimes require Kapton tape due to higher print bed heat. Measures: 8.25″ x 8″ (200MM x 210MM). Easily applied with any flat/straight object (ruler or id card of some sort)

2) 1 high quality PRINT BED REMOVAL TOOL Measures: 8″ x 3″. Beveled for much easier print removal. 3″ wide for removing prints without them falling off one side of the tool. Semi-sturdy blade allows for some flexibility but insures the print will not bend the blade and fall off. Sturdy construction means years of use.

3) 4 quantity .40mm Tungsten Carbide Drill Bits For regular nozzle maintanance and de-clogging (comes with an amazing 3.5″ pin-vise) Use as regular maintanance before each print or to un-clog a nozzle when prints begin to lose quality. Available in MANY sizes and combinations. Build your own pack from scratch option available.

4) 2 quantity glue sticks (7g or 0.24oz each) Glue makes removal with the tool much easier. Using the glue will also increase the life of each tape strip. Glue brand may vary but will always be 7g or 0.24oz.

About the Kit:

This kit is a must have for any 3D printer owner. It can also serve as a great start-up kit for a new printer owner. Removing prints from a print bed can be quite the hassle and can leave residue behind. Using the blue painters tape will increase the life of your print bed. The glue can be applied lightly over the tape in the area where your print will be. Use the 3″ wide tool to carefully remove your print and place it where you wish. The bits will fit perfectly in the pin-vise. Use them to un-clog nozzles or as regular maintanance before printing.

Product Features

  • 2 Painters Tape Strips 8″ x 8″
  • Print Removal Tool: 8″ x 3″
  • Nozzle Maintanance Kit: 4qty .4mm Bits and Pin-Vise
  • For ABS and lower heat PLA filaments
  • 2 Glue Sticks included: Brand may vary: Always 7g 0.24oz each

Detailed Information available on our Homepage…

Wangdd22 3D Printer Parts Heating Controller MKS MOSFET for Heat Bed/Extruder MOS Module Exceed 30A Support Big Current

Description:

Power Supply: 12V-24V

Function and Use: control hot bed, print head heating.

Usage:
1. Connect Power to power source, please note the anode and cathode.
2. Connect Hotbed to heated wire , please note the anode and cathode.
3. Connect digital control signal to Gnd,D8.
4. Connect the control signal of Ramps1.4 or MKS MOSFET to -Bed+
5. Choose one signal group to connect.

Package included:
1 x MOS module

Product Features

  • Each one will be done functional test .
  • Superior performance of MOSFET (Max 280A).
  • Extra large heat sink , the maximum current can be up to 30A or more.
  • Can use hot bed output signal of Ramp1.4 and MKS series to control.
  • Can use digital signal of 5-24v to control .

Visit The Website For More Information…

3D Printer Parts Accessories Print removal tool Remove prints safely from print bed

Included:

1) 1 high quality PRINT BED REMOVAL TOOL Measures: 8″ x 3″. Beveled for much easier print removal. 3″ wide for removing prints without them falling off one side of the tool. Semi-sturdy blade allows for some flexibility but insures the print will not bend the blade and fall off. Sturdy construction means years of use. This is a must have for any 3D printer owner or anyone in need of a quality putty knife or spatula.

Product Features

  • 3D Print Removal Tool
  • Measures 8″ long x 3″ wide
  • Wide enough to remove prints without dropping
  • No more damaged prints
  • Slightly flexible but sturdy and well made

Detailed Information available on our Homepage…

BIQU DIY 3D Three-Dimensional Scanner Adapter Plate for Ciclop 3D Printer Parts

Specifications:
-Ciclop belongs to desktop 3D scanners, which can not match with industrial standard scanners, and it is not suitable for scanning irregular and complex objects, only scan nearly cylindrical object, the effect will be more ideal, there are many factors affect scan result. like scanned objects, environment and light. there is a big relationship between them, so we recommend you scan in Constant Light Studio, scanning results will be better
-The surface of injection molding plastic parts is more smooth and clean
-Compared with printed plastic parts, You do not need to fix it
-It is more durable than plastic parts
-It is more easy to install
-You can stable the board on this plastic parts

Package Included:
1*Arduino uno controller
1*ZUM Scan Expansion board
1*A4988 stepper drive chip
1* 720 HD camera
2*Laser
1* 42 stepper motor
1*16014 bearing
1*12V, 2A adapter
1*200mm acrylic chassis
1*200mm Non-slip mat
1*acrylic Calibration board
1*standard sticker
1*black Winding tape
6*mats
2*M8*400mm screw
4*M8*170mm screw
1*M8*292mm screw
10*M3*10 screw
10*M3 nut
3*M8*10mm screw
28*M8 nut
18*M8 washer

Product Features

  • Ciclop is a 3D rotational laser triangulation scanner, it uses 2 lasers projected over an object to capture the geometry and texture as it rotates on a turntable
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology with the Ciclop
  • The ZUM BT-328 board, based on ArduinoTM, includes improvements and better features than other similar boards, which make it the best option for developing electronics projects
  • ZUM BT-328 executes the control firmware of the motor and the lasers. ZUM SCAN, a shield derived from Arduino CNC Shield, is connected at the top of the scanner
  • Ciclop has been designed with the setup process in mind. The kit includes all the necessary pieces and a step-by-step assembly guide, enabling you to set it up in less than an hour

Visit The Website For More Information…

BIQU T8 Anti Backlash Spring Loaded Nut Elimination Nut for 8mm Acme Threaded Rod Lead Screws DIY CNC 3D Printer Parts

Package List:
1 Setx T8 Anti Backlash Spring Loaded Nut(1 set nut include 2 brass parts and 1 spring )

Product Features

  • Material: brass
  • Color: copper
  • Size: 45x22x13.5mm
  • Lead: 8mm
  • Pitch: 2mm

Visit The Website For More Information…