3D Printing PLA White 1.75mm Filament 2.2LBS, Dimensional Accuracy of +/- 0.05mm


About PLA Filament:
Commonly used for prototypes,educational architectural models, hospitals and artifact replicas etc.,It’s a popular choice for users looking to paint objects after they have been printed, such as costume props and figurines.PLA is relatively brittle, so it is not recommended for thin, high strength applications.

Contents:
1.Made from 100% Grade A Virgin Raw Materials from Natureworks USA. We’ve seen first hand what prints from recycled filaments can look like, issues such as visible discoloration and other inconsistencies are common. From the very beginning, we’ve always guaranteed that our filaments are made from pure grade virgin resin, giving you consistent high quality prints, beautiful look and feel.
2.Controlled using Non-Contact Laser Diameter Gauge:Rapid,precise and repeatable measurements to exact dimensional tolerances. Such gauges allow us to maintain consistent high quality filament by automatically stopping a production line the moment a non-conforming measurement is detected. So regardless of the 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle.
3.New Non-Brittle Formula:Naturally brittle plastics such as PLA can now be used with confidence knowing that the filament will not brake during a print job, while still inside the printer or just sitting in storage. Our new formula adjusts the degradability of the material for optimal strength and performance.

Notes:
PLA can be printed both with and without a heated print bed,but if your desktop 3D printer does have a heated print bed it is recommended to set your print bed temperature to approximately 60°C
If warping still occurs, print using raft.
Glow in the dark use 5°C-10°C higher.

Product Features

  • *Material: GT-PLA which is new formulation, high glossy, tough, for none teflon tube inside hot end of 3d printer, like makerbot, UP, cube robo, etc. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed.
  • *1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • *Recommended Extrusion/Nozzle Temperature 195°C – 210°C
  • *Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.25″
  • *Accurate diameter: 3.0/1.75mm, variations + /-0.03mm, roundness +/-0.02mm;

Check Out Our Website For Details…

WER 12-pack 3D Sublimation Silicone Mug Wrap Mug Mold 11OZ Cup Clamp Mug Printing Fixture Mug Transfer Mold

WER 12-pack 3D Sublimation Silicone Mug Wrap Mug Mold 11OZ Cup Clamp Mug Printing Fixture Mug Transfer Mold

Instructions

All items are well-checked before shipment so that they could arrive in good condition.
Due to different monitors, please allow little color tolerance. Hope you could understand that.
If there is any problem, please contact us freely and we would do our best to serve for you.

About seller

Our company has been specilized in 3d printers and 3d printing items for many years.
Offering customers high-quality 3d items with excellent price is what we did, what we do, and what we will do.
Our aim is to offer customers happy and satisfactory online shopping experience.Any question, please feel free to let us know and we are always here for you.

Product Features

  • Material: heat-resistant silicon and metal; high temperature resistance, could be reused.
  • Used for: 3D 11OZ mugs sublimation printing, used to fix mug and picture in case of printing deformation when heat
  • Best partner for HeatTransfer Sublimation, elasticity, tension
  • Main Color: Green
  • Due to different monitors, please allow little color tolerance.

Visit The Website For More Information…

3D Printing Pen,Homecube Professional Printing 3D Pen for Kids with Silicon Pen Cap to Prevent Burns 3D Drawing Printer Pen with ABS Filament Refills,Can be Driven by Power Bank (White)

Homecube 3D printing pen is suitable for both kids and adults,no matter creating 3D models, 3D scribbler printing, doodle model making or drawing interesting things.
It can help children and adults to improve spatial thinking ability, to encourage their creative imaginations.
Homecube 3D printing pen can be heated directly with mobile power,make it more convenient to use.
Currently on the market commonly used power model capacity is 3350MAH,5200MAH,10000MAH,13000MAH. The 3D pen can be separately normally used for 60 minutes, 100minutes, 180 minutes,230 minutes.

Specifications:
Use:3D pen,DIY drawing
Supplies type:ABS / PLA
Supplies diameter:1.75mm
Printing nozzle:0.7mm
Adjustable heating temperature range : PLA(185-195℃), ABS(210-220℃)
Speed of extrusion:adjustable 1-4 file
Type:USB
Power supply:DC 5V/2A
Gross power:10W
Pen weight:58g

Package Contents:
1 x 3D Pen
1 x Power Adapter
1 X Pen cap
1 x Supplies
1 x User manual

Note:
1. The pen is suitable for children over 8 years old and adult. It can be used by children under the guardianship of adults.
2. Front near the tip and the device for high temperature danger zone, so it is forbidden to touch or use the pen point touch other items.
3. It is prohibited to insert foreign body into the entry hole.
4. Keep the pen away from water or any other liquids.
5. Prevent falling from high altitude place or away for kids’ touch.

Product Features

  • IMPROVE SPATIAL THINKING ABILITY: Homecube 3D pen is a great tool for anyone interested in 3D modelling. It is a great gift for any occasion.The only limitation of 3D drawing is your imagination.Homecube 3D printing pen is perfect for children above 6 yrs old and adult no matter you are artists, hobbyist or creative lovers.
  • HUMANIZED DESIGN AND POWER SUPPLIER:Two materials choices,support shift between PLA and ABS.Connect with power supply through USB cable,can be driven by power bank,computer,laptop and ect.,make it more convenient to use.No matter where you are,just enjoy it.Display screen can directly show the information like supplies type, speed, temperture and safe warning. Aviation ceramic nozzle material make it safer while using.
  • SMART OPERATION: Support dual-mode for feeding,Hold the “Forward” button to feed continuously and release to stop feeding, or double press the “Forward” button to feed continuously and press again to stop feeding.1-4 file adjustable discharging speed.Long press “Return” button for 2 seconds to return the supplies automatically.
  • INTELLIGENT SLEEP: The device will enter into sleeping mode automatically and the screen will display “SLEEP” when the device is not used more than 3 minutes. If you need to use it again, press “Forward” button to trigger it.
  • WARRANTY: 24 hours email customer service support.30 days free return/replacement.

Check Out Our Website For Details…

3D Printing For Drones, new Youtube show

Previous articlePolarPro Launches Its First Drone Software with Aurora Cinematic Color Presets
Tiaan Roux

Editor, sUAS Guide | CIO, sUAS News | “My interest in UAS began in 2006 in the Masai Mara, Kenya where I was working as a bush pilot and met Gary Mortimer. I have always loved computers, maps, aerial photos and any kind of flying thing so the UAS addiction quickly took hold. Since then my interest in these technologies has grown from just an interest to building and flying small UAS as well as getting involved with sUAS News.”

3 in 1 out Hotend for multi-color/Mix color 3D printing

For most common 3D printers, it can usually print with only one color; some slightly advanced, you can print two colors, like our Prusa I3 Pro C model,some are more advanced which can print 2 mix colors, like our Prusa I3 Pro M201 model. Printing with 2 in 1 out mix-color is an exciting experience, what about 3 in 1 out mix-color with more potential? This 3 in 1 out Hotend, just as its name implies, has three independent feed-in channels and shares one out-feed nozzle at the end of the three feed channels. This can be a new frontier of 3D printing. Based on the principle of the three primary colors, the three filaments of different colors will be fed in accordance with a certain percentage of feeding rate, then they will be melted and mixed in the nozzle chamber to generate another new color or mixed color, enables the printing of model with any color. The key feature of this 3 in 1 out Hotend is the diamond shaped nozzle. We have designed the nozzle to have smallest possible mixing chamber to make color shifts as fast as possible and to avoid unnecessary filament waste. To ensure rapid nozzle heat up we have constructed the nozzle as compact as possible. This 3 in 1 out Hotend is designed to be used on Kossel or Rostock printer. If you want to use it on other printer, you will need to make modifications according to your project. You are welcomed to share your fantastic idea with us in our forum.

Check Out Our Website For Details…

Anpro 3D Pen Filament Refills, 14 Colors, 20 Foot Lengths, 3D Printer ABS Filament 1.75mm, 280 Linear Feet 3D Printing Filament

280 LINEAR FEET OF MATERIAL – This package comes in diameter 1.75mm ABS length 6.1m strands of each 14 individual color. With this amount of filament the sky is the limit and provides great variety and volume.

USED IN 3D PENS AND PRINTERS – This sample pack can be used for all types of 3D printing and is excellent for detailed and demanding applications. Many customers have found our product to be very useful in designing with the 3D pen because of the great array of colors. It works with most well-known 3D pens and printers among the 3D printing community. The temperature range for this product is 230°C – 260°C along with a tolerance of +/- 0.05mm. These are overall projected specs and may vary with printer.

14 UNIQUE COLORS – This sample pack comes with a great variety of 14 different colors that includes a BONUS glow-in-the-dark color to give you more options when creating your artistic masterpiece. We have chosen to offer this variety pack as a way to promote more detailed and colorful projects among the 3D printing community.

HIGH QUALITY MATERIAL GRADE A 100% VIRGIN – Our sample pack of filament contains premium grade material and the consistency of the round diameter provides optimum flow through the extruder, tube, and nozzle.
Specification:

Brand name: Anpro

ABS extrusion temperature: 230 °C- 260°C

Diameter: 1.75mm

Color: red, purple, bule, black, white, yellow, green, brown, golden, transparent, gray, orange, pink, skin color

Quantity: 6.1m / pc * 14 pcs

a single package Material Weight: 20 grams (plus or minus 2 g)
Package included:
14 x Anpro 3D Printer Filament

Warranty:
60 days money-back & 24-months warranty & Within 24 hours response.

Product Features

  • Diameter 1.75mm ABS Printing pen/printer filaments
  • Length: 6.1m per pc, 85.4m total, Weight: 20g/pcs
  • ABS extrusion temperature:230 °C- 260°C
  • 14 Different Colours – red, purple, bule, black, white, yellow, green, brown, golden, transparent, gray, orange, pink, skin color
  • Notice: It is not fit for 3Doodler start pen and LIX 3D pen. Children should be accompanied by their parents when using the product

Click Here For More Information

USAFilament 9800426 PLA 3D Printing Filament, 2.2 lb., 3 mm, White Spool

This high quality filament is an effective and affordable solution for your projects. Works with Air wolf 3D, Flash forge Creator, Maker Bot 1, Maker Bot 2X, Printrbot Jr., Project, Rep Rap, Up! 3D, Up! 3D Mini, or Up! 3D Plus. 100% Virgin Material.

Product Features

  • High end filament backed by American 3D printing experts
  • Sealed to avoid dehydration of material and thus a longer shelf life
  • Made with high grade inputs for superior quality
  • Compatible with a variety of printers
  • Recommended Extrusion Temperature 180°C – 210°C (356°F – 410°F)

Check Out Our Website For Details…