This kit is a good start for starter to build your own 3D printer. basically once you get the electronic parts done. then later it would be more easier to complete the rest parts.and yes, this is almost all the electronics you need for your 3D Printer.(except motors and extruder hotend)
If you are not sure what you need to complete your 3d printer project, please feel free to ask. We not just sell them, we also provide professional after-sales service, We will offer you a detailed tutorials including project introduction and their source codes. so welcome to discuss with us, we will try to do technical support as much as we can.
(1)3D Printer Controller RAMPS 1.4 – You can check:https://www.amazon.com/dp/B06WP5DDP1
(2)Mega 2560 R3 – You can check:https://www.amazon.com/dp/B00E94CGTQ
(3)LCD 12864 Graphic Smart Display Controller – You can check:https://www.amazon.com/dp/B00L72FAZU
(4)A4988 Stepper Motor Driver with Heatsink – You can check:https://www.amazon.com/dp/B00JXGT1G6
(5)Mechanical Endstop Switch – You can check: https://www.amazon.com/dp/B00OCFEZ1O
(6)2M GT2 Belt + 2 pcs GT2 20 Tooth Pulleys – You can check: https://www.amazon.com/dp/B00OFUZSP8
(7)MK28 Heatbed:This is the latest version of MK2B,100% compatible with all Prusa and Mendel 3d printer variants.
(1)3D Printer Controller RAMPS 1.4 x1
(2)Mega 2560 R3+USB Cable x1
(3)A4988 Stepper Motor Driver with Heatsink x5
(4)LCD 12864 Smart Controller x1
(5)MK28 Heatbed with Thermistor and High Temp Wire x1
(6)Mechanical Endstops x3
(7)2M GT2 Belt+20 Tooth Pulleys x2
(8)Smart Adapter x1
(9)30cm Cable x2
(10)Storage Box x1
- (1) 3D Printer Controller RAMPS 1.4 x 1 + Mechanical Endstops x 3
- (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
- (3) A4988 Stepper Motor Driver With Heatsink x 5
- (4) LCD 12864 Graphic Smart Display Controller Kit x 1
- (5) MK28 Heated Bed with Thermistor and High Temp Wire x 1
DIY 3D printer kit design and rigid quality control standards deliver high quality products at fair prices. No matter you are Professional, Maker, Designer, or Hobbyist etc.，you can assemble your own personal 3D printer by your own hands and create something unique by yourself
Excellent Quality Performance: LCD screen to display; ustomized good quality extruder;4 stars lead screw brass nut & high import lead rod; high quality step motors(without interruption for 1000 work hours);updated main board, more function support; high quality power supply; free 3D filament and spool holder along with the 3D printer package.
Worry Free Customer Service: Buy with confidence. we have professional technical engineer to solve the problems you may face when using the 3D printers.
Auto leveling Standard
All assembly units
All assembly tools
All assembly datasheet (document, picture)
8G SD Card
1 x Masking paper
Free 1 Rolls Filaments
Filaments color : Random color, PLA or ABS net weight 0.25kg/roll
Structure: Acrylic Framework
Power Shupply: 110/220V 20A
Output: 12V 20A 240W
Off-line Print: Support
XY Axis speed : 3000mm/min
Printing Speed: 40-120mm/s
Layer Thickness :0.1mm~0.4mm
LED Screen: support
Z Axis speed:200mm/min
Hotbed Temp: 110
Extruder Temp: 170~275
Printing Size: 220x220x240mm
Filament Diameter: 1.75mm
Machine Size: 500x400x230mm
XY Axis Accuracy: 0.012mm
Z Axis Accurancy: 0.004mm
Nozzle size : 0.4mm
Note: install video in SD card, if you have any problem or any special request please contact us first
- Self-leveling, self-cleaning, tetherless printing, and an integrated power supply make powerful 3D printing easy
- A large build volume of 220 mm x 220 mm x 240 mm enables large prints, or many small prints at once
- High accuracy printing Operating to easy Support auto level ans off-line print
- SUPPORT SEVERAL FILAMENTS: Prints PLA and higher temperature ABS, TPU,WOOD,PVA, Nylon,PVA and PP. Print many filaments and not just PLA.
GT2 belts and pulleys compliant (GT2 pulley) are popular choices for RepRap tests and traps.
The series GT2 belts are specially designed for the linear movement. Use a profile with rounded teeth, which ensures that the belt tooth perfectly and accurately into the pulley groove, so that if one reverses the direction of the pulley, there is no place for the band to move in the groove.
For the best performance, which is at least six teeth in contact with the pulley at a given time. This minimizes the possibility of sliding ring and helps to play in reducing even more. In practice, this means that you have made at least a pulley 12 teeth, and I usually try to get at least 16 teeth.
Groove Width: 7mm
Total Width: 16mm
Flange : Dual
1 x GT2 Belt
8 x GT2 Pulley
16 x Screws
1 x Wrench(As Pictures)
- Durable and practical
- Designed specifically for linear motion
- GT2 Pulley and GT2 Belt are used together,very convenient to use
- Round tooth profile guarantees that the belt tooth fits smoothly
- 20 Teeth contact with the belt, that minimizes the chance of the belt slipping
This is synchronous aluminum belt pulley for 3D printer.
This pulley is for 6mm width GT2 timing belt and 5mm shaft stepper motor.
There are two screws for each set of pulley (the screws are included in the package).
Belt Width: 6mm
Length: 10 meters (32.9 feet)
3D printer; motorized camera slider; belt sander; dishwasher; packing machinery; motorcycle; vehicle; mining equipment; dryer; conveyor and etc.
No folding, in order to avoid damage to the skeleton material, cause negative impact on the strength of the timing belt.
Avoid contact with chemicals (especially strong oxidizing acid, such as concentrated sulfuric acid, etc.).
Avoid contact with oil and water for a long-term.
When change the timing belt, the belt cannot take out unless the tension of the belt reduced to the lowest level and cannot use non-professional tools to pry it down.
5 x GT2 Timing Belt Pulley
1 x Allen Wrench
1 × 10 Meters GT2/2GT Timing Belt
- Timing belt pullet: Tooth: 20T; Bore: 5mm; Belt Width: 6mm.
- Timing belt: Length: 10 meters (32.9feet); Width: 6mm.
- GT2/2GT timing belt system is designed for linear motion and precision,high positioning accuracy.
- Wide application: Wide application: 3D printer; motorized camera slider; belt sander; mining equipment; dryer; conveyor and etc.
- Package includes: 5 x GT2 Timing Belt Pulley; 1 x Allen Wrench; 1 × 10 Meters GT2/2GT Timing Belt.
3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v ROKO BN-10-30V BK-NPN.NO BU-0V This is an auto level sensor for the Anet A8 or other Prusa i3 Models. Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the original z stop and plug in sensor and screw into the back of printer. You will most likely have to update firmware to make this function. Please be aware we are not responsible for any problems that come from upgrading or flashing new firmware. 3rd Party firmware is not recommended by the manufacturer and should be installed with caution.
- USA Seller | Fast Shipping | No Soldering | Plug and Play
- 3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v
- This is an auto level sensor for the Anet A8 or other Prusa i3 Models.
- Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the original z stop and plug in sensor and screw into the back of printer.