RepRap Champion Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2, V2.1 and Plus 3D printers

This is second revision of Duplicator i3 / Maker Select Y carriage plate.

Y carriage plate compatible with popular Wanhao Duplicator i3. V2, V2.1, Plus and Monoprice Maker Select, V2, V2.1, Plus printers. Please note – plate was designed and manufactured strictly to these printer models, it will not work with standard open source prusa i3 due to difference in Y-rod distances (140mm or 150mm on Wanhao and 170mm on Prusa i3).

Second revision plate has hole pattern that fully matches stock plate, we just added weight saving holes and cutouts to make plate lighter. Material is the same – tempered aluminum alloy 6061-T6. Surface is brushed and anodized clear.

Plate can be used with stock bearings in plastic holders, as well as SC8UU bearings. We will also publish STL file for the bearing holder similar to stock bearing holder.

Wahnao i3 / Maker Select Y carriage plate features:
Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select
Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick.
Has additional provisioning hole for 3 point level adjustment of build surface.
Allows 3 x linear bearing configuration as well as 4 x bearing configuration.
Compatible with various aluminum build plates and heated beds, sold in our store.

Package Contents:
1 x Anodized Aluminum Y Carriage Plate for Monoprice Maker Select or Wanhao Duplicator i3

Product Features

  • Compatible with Maker Select, Wanhao Duplicator i3 versions V1, V2, V2.1 and Plus
  • Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2.1 and Plus
  • Very stiff, made of tempered aluminum alloy, brushed and anodized clear, no more issues with leveling
  • Y rod distance supported – from 140mm to 150mm

Detailed Information available on our Homepage…

RepRap Champion Anet A8 A6 3D Printer Upgrade Y Carriage Anodized Aluminum Plate

This is new product designed by RepRap Chanpion to upgrade existing Y carriage plates on pupular Anet A6 and A8 3D Printers. Plate is made of tempered aluminum alloy, brushed and anodized for perfect flatness and pleasing surface finish. This product will fix leveing issues that you might have on your Anet A6/ A8 3D Printers due to twist on original Y carriage plate.

Package contents:

1 x Y Carriage Anodized Aluminum Plate

Product Features

  • Drop-in replacement for Anet A8 and A6 stock Y carriage plate
  • Completely flat Y carriage and very stiff plate, eliminates leveling issues
  • Made of strong temepered aluminum, brushed and anodized
  • STL files for belt holders are here www.thingiverse.com/thing:2325206

Detailed Information available on our Homepage…

RepRap Champion MK2B PCB HeatBed Heat Bed RepRap 3D Printers pre-wired for 12V SMT LED soldered

MK2B comes with pre-soldered SMT LEDs and wiring. PCB pre-wired for 12V power.

Specifications:

Outer Dimensions: 214mm (8 7/16 in) x 214mm (8 7/16 in)
Dimensions between holes: 209 x 209mm
Laminate FR4 1.6+-0.15mm
2 Layer, 35µm Copper
White Soldermask – Both Side
Black Silkscreen – Both Side
Power Input: 12V/24V DC
Copper Plated Holes
Wiring length: 700mm

Package contents:

1 x MK2B PCB Heated Bed pre-wired for 12V power.

Product Features

  • Popular MK2B 200x200mm dual power heated bed design
  • Compatible with most Prusa i3 variations, Mendel, Mendelmax and plenty of other 3D printers
  • Power rating is 120 Watt under 12V
  • Power wiring is included in the kit, length of wires 0.7 meter

Click Here If You Need More Detailed Info…

Ivelink MK8 Extruder Part Assembled Hot End + 0.4mm Nozzle for RepRap 3D Printer 1.75mm Filament (12V 40W Heater)

12V,40W heater. DIY hotend requires heat sink to operate properly – metal base, aluminum block, or any other type of cooling device

Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw

Feature

-30mm long stainless PTFE lined barrel
-NTC 3950 100K pre-wired thermistor
-Low profile: only about 43 mm high
- Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market
-This will give you good selection of nozzle orifice diameters

NTC 3950 Thermistor parameters

- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25C=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter

Package Including

6 * 0.4mm brass nozzle
1 * Stainless updated barrel tube
1 * Aluminum updated heater block with necessary screws
1 * 12V 40W Cartridge Heater Cable
1 * NTC 3950 Pre-wired thermistor

Product Features

  • Assembled mk8 extruder Reprap Prusa I3 3D Printer
  • Stainless updated barrel tube for trouble free, low friction print,much solid quality
  • Pre-wired NTC3950 thermistor to the updated heater block
  • Use it with heatsink or cooled metal base(Cartridge heater:12V,40W)
  • Plenty of MK8 clone nozzles compatible with this hotend – nozzle replacement is easy

Visit The Website For More Information…

3D Printer MK8 Remote Extruder Accessories 1.75 Filament All Metal Remote Extruder For MK8 Prusa i3 or Kossel RepRap DIY Kits Aluminum Frame Block Accessory

Features
1. MK8 remote printer head right hand (not included steppter motor )
2.This is improved version, there are 2pcs Pneumatic fittings so that it feeds more fluently.
3.3D Printer MK8 Bowden Extruder kit
4.Used for 1.75mm/3mm filament, Reprap, Makerbot
5.Type: Right hand

note Please note this set does not include steppter motor!

Specifications
Material:Full Metal Aluminum Alloy
Color: As shown
Package Including
1* MK8 extruder DIY kits (Right hand version)

Product Features

  • 1.Used for 1.75mm filament, Reprap, Makerbot ,Prusa 3D Printer
  • 2.Equipped with two pneumatic fittings, the feed process more smoothly.
  • 3.Type: Right hand
  • 4.3D Printer MK8 Bowden Extruder kit
  • 5.Equipped with two pneumatic fittings, the feed process more smoothly, you can make your extruder closer to the print head (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies)

Detailed Information available on our Homepage…

SainSmart InstaRep A8 DIY 3D Printer, SD Card Printing, Supports ABS PLA TPU Filament Reprap Prusa i3 High Precision Printing

Overview:

SainSmart A8 3D printer provides you all the necessory parts to build up your own 3D printer. We are a well known brand for 3D printer and 3D filament, and we provide 1-year warranty. Let’s make our ideas actual!

Features:

   ● It can be used for personal use, business use or even for educational use.
   ● Supports ABS/PLA/TUP ect. This printer works well for multi material of filament. It also comes with a spool holder, very convenient.
   ● Supports SD-Card, it can still print when off-line.
   ● Easy to Assemble. With deatail instruction, user is able to build up his own 3D printer easily.

Notice:
1. Please follow the instruction to connect the power supply.
2. Please check the voltage switch on the power before powering it.
3. Please aviod continuous printing for a long time. If necessary, add additional fan for cooling.

Specification:

   ● Frame Material: Acrylic
   ●SD-Card & LCD Screen: Yes
   ●XY Axis Accuracy: 0.012mm
   ● Z Axis Accuracy: 0.004mm
   ● Number of extruder: 1
   ●Print Color: Single
   ●Extruder Diameter: 0.4mm
   ●Max. Print Size:220x220x230mm(8.66*8.66*9.06 inch)
   ● Nozzle Temp.: Recommended: 195℃ for PLA, Max 250℃
   ● Heating Plate Temperature: around 100℃
   ● Heating Plate Material: Aluminum
   ● Printable Materials: PLA, ABS, TPU ect.
   ● Filament Diameter: 1.75mm

Pack List:

1x SainSmart A8 3D printer (unassemble)

Reference:
http://s3.amazonaws.com/s3.image.smart/download/101-91-200/SainSmart%203D%20Printer-InstaRep%20A8%20User%20Manual.pdf

Product Features

  • TPU flexible filament is included. Test with our best filament right away.
  • 1.75mm direct feed extruder. Compatible with TPU, ABS, PLA, Conductive PLA, Wood, Metal composites, and dissolvable PVA etc.
  • Industrial-grade high precision printing
  • Easy offline printing and bulk printing with LCD panel and SD card slot
  • 1-year Warranty.

Click Here For More Information

EAONE 6pcs 30MM Length Extruder 1.75MM Tube and 6pcs 0.4MM Brass Extruder Nozzle Print Heads for MK8 Makerbot Reprap 3D Printers (Bonus: 2pcs cleaning drill Bits)


EAONE 6pcs 30MM Length Extruder 1.75MM Tube and 6pcs 0.4MM Brass Extruder Nozzle Print Heads for MK8 Makerbot Reprap 3D Printers(Bonus: 2pcs cleaning drill kits)

Specification of Extruder Tube:

Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel

Specification of Brass Nozzle:

Type :0.4mm Extruder Brass Nozzle Print Head
Color: Golden.
Material: brass
Size: 5*13mm
Input Diameter: 1.75mm
Output Diameter: 0.4mm

Specification of drill kit:

Type :Drill kit
Material: silicone
Bit diameter: 0.4mm
The bit length: 8mm
The length of shank: 20mm

Note: Compatible with all 1.75mm PLA ABS printer, works with Anet A8

Attention: Small parts, keep away from children

Package include
6 x 3D Printer Nozzle Inputting Tube
6 x 3D Printer Extruder Brass Nozzle Print Head
2 x Drill Bits(Color:Random)

Product Features

  • 6x 3D Printer Nozzle Throat + 6x Nozzle Print Heads + 2x Cleaning Drill Bits (for MK8 Makerbot Reprap Prusa I3 3D Printer)
  • Nozzle Throat: Material – Stainless Steel; Outer Thread – M6; Inner Diameter – 2mm; Length – 30mm; Filament Diameter – 1.75mm
  • Extruder Brass Nozzle Print Head: Material – copper (brass); Size – 5*13mm; Output Diameter – 0.4mm; Input Diameter – 1.75mm; Color – Golden
  • Cleaning drill Bits: Diameter – 0.4mm; Length – 8mm; The length of shank – 20mm
  • Compatibility with all 1.75mm PLA ABS 3D printer, works with Anet A8

Visit The Website For More Information…