New Arrival Auto Leveling Position Sensor for Anet A8 Prusa i3 3D Printer RepRap Includes Mounting Plate and Screws

3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v ROKO BN-10-30V BK-NPN.NO BU-0V This is an auto level sensor for the Anet A8 or other Prusa i3 Models. Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the original z stop and plug in sensor and screw into the back of printer. You will most likely have to update firmware to make this function. Please be aware we are not responsible for any problems that come from upgrading or flashing new firmware. 3rd Party firmware is not recommended by the manufacturer and should be installed with caution.

Product Features

  • USA Seller | Fast Shipping | No Soldering | Plug and Play
  • 3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v
  • This is an auto level sensor for the Anet A8 or other Prusa i3 Models.
  • Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the original z stop and plug in sensor and screw into the back of printer.

Click Here For More Information

BIQU T8 Anti Backlash Spring Loaded Nut Elimination Nut for 8mm Acme Threaded Rod Lead Screws DIY CNC 3D Printer Parts

Package List:
1 Setx T8 Anti Backlash Spring Loaded Nut(1 set nut include 2 brass parts and 1 spring )

Product Features

  • Material: brass
  • Color: copper
  • Size: 45x22x13.5mm
  • Lead: 8mm
  • Pitch: 2mm

Visit The Website For More Information…

3D Printer Reprap Mendel Rework Prusa i3 Frame Laser Cut 6mm PlyWood + Screws

I propose to sell a laser-cut standard sized frame for assembling a Prusa i3 3D printer. The frame material is a 6mm polished birch plywood (thickness may vary + \ – 0.5 mm). Apart from plywood parts shown on photo there are also M3 screws included for assembly

Visit The Website For More Information…

3D Printer Reprap Mendel Prusa I3 Frame Laser Cut 6mm PlyWood + Screws

I propose to sell a laser-cut standard sized frame for assembling a Prusa i3 3D printer. The frame material is a 6mm polished birch plywood (thickness may vary + \ – 0.5 mm). Apart from plywood parts shown on photo there are also M4 screws included for assembly

Visit The Website For More Information…

3D Printer Mini Kossel Nuts, Bolts, Screws, Fasteners Kit for DIY 3D Printer – Silver Colored

Silver Colored. Nuts, bolts, screws, washers, Euro style terminal block connector, Allen wrench for Kossel Legacy 3D printer

Product Features

  • Nuts: (1) m5, (100) m3, (50) m3
  • Washers: (1) m5, (30) m3
  • Cap Screws: (1) m5x20, (3) m2.5 x 16, (6) m2.5 x 12, (6) m3 x 20, (6) m3 x 35, (13) m3 x 16, (15) m3 x 25, (50) m3 x 6, (100) m3 x 8
  • (1) Euro Style Terminal Block Connector
  • (1) Long Hex Allen Wrench

Detailed Information available on our Homepage…

Kossel Legacy 3D Printer Rod Parts Kit – 6 Rods, 12 Set Screws, 12 Rod Ends

Parts needed to assemble rods for a 3D Kossel Legacy printer

Product Features

  • (6) Pre-Cut Graphite Light Wall Tube Rods, 253.4 mm (±2 mm) Length, 0.230 Inch Outer Diameter, 0.153 Inch Inner Diameter, 0.0385 Inch Wall
  • (12) Set Screws, m4 20mm
  • (12) Traxxas Rod Ends, 7/8″ Large Rod Ends with Hollow Pivot Balls

Visit The Website For More Information…

Mini Kossel 3D Printer Rod Parts Kit – 6 Rods, 12 Set Screws, 12 Rod Ends

Parts needed to assemble rods for a 3D Kossel Mini printer

Product Features

  • (6) Pre-Cut Graphite Light Wall Tube Rods, 180.4 mm (±2 mm) Length, 0.230 Inch Outer Diameter, 0.153 Inch Inner Diameter, 0.0385 Inch Wall
  • (12) Set Screws, m4 20mm
  • (12) Traxxas Rod Ends, 7/8″ Large Rod Ends with Hollow Pivot Balls

Visit The Website For More Information…