Gizmo Dorks PEI Sheet, 8″ x 8″ 3D Printer Build Surface Polyetherimide Ultem

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Easily cut down to size by scoring with a utility knife

Click Here For More Information

Gizmo Dorks PEI Sheet, 10″ x 10″ 3D Printing Build Surface with 3M 468MP Adhesive Tape

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Includes: 1x PEI Sheet, 1x 3M 468MP Transfer Tape

Detailed Information available on our Homepage…

Gizmo Dorks PEI Sheet, 8″ x 8″ 3D Printing Build Surface with 3M 468MP Adhesive Tape

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. Carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life.

Product Features

  • Great for printing ABS and PLA (along with many other materials) directly on to print surface without the need for additional adhesives or tape.
  • Single 0.8mm sheet installs quickly on top of existing build platform
  • Blue protective film guards against scratches during shipping. Remove film before using PEI sheet.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Includes: 1x PEI Sheet, 1x 3M 468MP Transfer Tape

Check Out Our Website For Details…

KR-NET® 3D Printer Adhesive Sticker Build Sheet Grid 7.8″ x 7.8″ (Pack of 3) for XYZ Printing Da Vinci Pro / 1.0A /2.0A Duo /1.0 Aio


Premium 3D Printer Build Sheet
Build sheet adheres to XYZ printer’s bed to help the filament stick during printing, at the same time protecting your printer.

Supported Filaments
Adapt to different filaments, ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE).

Special Features
Heat resistant durable construction surface. High quality 3M sticker, bubble free and easy apply/ removal.

Design for XYZ Printing (7.8″ x 7.8″ models or smaller)
Design for XYZ Printing models, Da Vinci Pro / 1.0A /2.0A Duo/ 1.0 Aio. You may cut the KR-Net Build Sheet into any smaller size.

Compatible to:
XYZ Printing Da Vinci Pro
XYZ Printing Da Vinci 1.0A
XYZ Printing Da Vinci 1.0 Aio
XYZ Printing Da Vinci 2.0A Duo
3D Printers with 7.8″ x 7.8″ platform

Specification
Condition: Brand New

Package includes:
-3D Printer Build Sheets x 3

W839

Product Features

  • Build sheet adheres to XYZ printer’s bed to help the filament stick during printing, at the same time protecting your printer.
  • Design for XYZ Printing models, Da Vinci Pro / 1.0A /2.0A Duo/ 1.0 Aio. You may cut the KR-Net Build Sheet into any size.
  • Adapt to different filaments, ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE)
  • Heat Resistant Durable construction Surface . High Quality 3M Sticker, Bubble Free and easy apply / removal
  • Pack of 3 Sheets. Sealed KR-NET Retail Pack

Detailed Information available on our Homepage…

Melife® 4 Pieces Luxury 3D Reactive Printing Big Red Flower Bedding Set Duvet Cover Sheet Pillow case Bed-Linen

Product Features

  • 4-Pieces Beddings: 1-Duvet Cover, 1-Sheet, 2-Pillow Case
  • 1-Duvet Cover: 63”*83”; 1-Sheet: 71”*79”
  • 2-Pillow Case: 19”*29”
  • Use 100% Cotton Material
  • Unique Design 3D Printing

Check Out Our Website For Details…

Melife® 4 Pieces Luxury 3D Reactive Printing Pink Chrysanthemum Bedding Set Duvet Cover Sheet Pillow case Bed-Linen

Product Features

  • 4-Pieces Beddings: 1-Duvet Cover, 1-Sheet, 2-Pillow Case
  • 1-Duvet Cover: 63”*83”; 1-Sheet: 71”*79”
  • 2-Pillow Case: 19”*29”
  • Use 100% Cotton Material
  • Unique Design 3D Printing

Check Out Our Website For Details…

Researchers 3D Print Foldable Computer Memory on a Standard Sheet of Paper

We have seen so many new applications and processes within the 3D printing space, over the last several months alone. Over the next several years, I believe that we will begin to see these various methods of printing, and bits-1technologies involved in the process all begin to converge upon one another. This could ultimately lead to major disruptions within dozens of markets throughout the world.

As new technologies are refined, over the next decade, we will begin noticing a merging of these technologies. We now have printers which can print in resins, plastics, metal alloys, sandstone, and several other materials. We also have printers which are capable of printing electronically conductive materials, and even makeshift lithium-ion batteries. These technologies will eventually converge, leading to a machine capable of printing all of these materials within a single process. At this point, the only major component missing in our quest to 3D print a portable computer, would be 3D printed memory.

Not so fast! Taiwanese researchers, including Der-Hsien Lien, Zhen-Kai Kao, Teng-Han Huang, Ying-Chih Liao, Si-Chen Lee, and Jr-Hau He, have just published a paper where they describe a process they’ve used to 3D print a type of RRAM memory on a single standard piece of paper.

Paper would make an amazing substrate for printed memory because of its ability to fold, as well as its affordability and extreme light weight. The main issue with paper, however, is that it has a very high absorption rate. The last thing you want to have happen when printing tiny precise specs of liquid, is for it to absorb into the paper.   This is why the researchers first coated the paper with carbon. In doing so, this eliminated the possibilities of absorption.bit-feat

The next issue they had to overcome was figuring out how to create an insulator which would eventually be sandwiched between two electrodes and switched between 0 and 1, acting as a single bit of memory. Basically each bit within the memory would be its own insulator. Eventually they came up with a very capable insulator, a titanium dioxide solution.

The titanium dioxide was injected into a printer cartridge similar to that of an ink-jet printer. This allowed the researchers to easily print the material onto the carbon coated paper. At this point, they only needed electrodes to complete the memory sheet. For this they used a silver solution which they also printed onto the paper as tiny little dots. Each dot was only 50 microns in width, with a gap of 25 microns between each. Based on the size of a normal sheet of office paper, which measures 8.5 x 11 inches, a total of 1 MB of memory could be printed on a single sheet of paper. Incredibly, each bit of memory also has the capability to  maintain its state of 0 or 1 for as long as eight minutes without a supply of power.

There is still a lot of work to be done before people will be able to 3D print their own foldable memory chips on a standard piece of paper, however, this is a huge step towards integrating memory into future 3D printing applications. What do you think? When will the first 3D printer be able to print out an entire hand held computer? Let’s hear your thoughts in the 3D printed memory forum thread on 3DPB.com.

bit-2
[Source: ACS.org]