C.J. SHOP 1pcs Kossel 3D Printer MGN12H 12mm miniature linear rail slide + MGN12H carriage Minil slide for XYZ Axies

Description:

Color: Mainly sliver
Material: metal

Size:
 
Rail slide: 40cm x 1cm(L*W)
Carriage: 2.5cm x 4.5cm(L*W)
Weight: 320g
Fit for: 3D printer
 
Package Included:

1 x  rail slide
1 x  MGN12H carriage

Product Features

  • Color: Mainly sliver
  • Material: metal
  • Rail slide: 40cm x 1cm(L*W)
  • Carriage: 2.5cm x 4.5cm(L*W)
  • Weight: 320g

Detailed Information available on our Homepage…

C.J. SHOP 8 Types All Metal J-head Hotend Extruder For 1.75mm Filament RepRap MakerBot 3D Printer Accessories

Features: 
 
The Bowden principle
The Bowden cable lets you reduce the moving mass of the extruder and thus allowing faster controlled motion, less shaking of your machine, less energy use andimportantly: faster printing! Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking.
If the filament drive mechanism is placed on a non-moving part of the 3D printer, it can be pushed into a tube. PTFE (Teflon) is useful because it is slippery: it has little friction with the plastic.This limits wear and loss of energy. The tube’s other end is connected to the extruder’s hot-end.
The concept of using a Bowden cable as guide was suggested and pioneered by Ed Sells.
 
The main advantages
All metal enables working with Polycarbonate up to 300 degrees Celsius and with future materials that require higher working temperatures beyond those supportedby plastic extruders and hot end.
Tested with PLA, ABS, polycarbonate, nylon and PVA.
The J-head is assembled with 100K NTC thermistor and Cartridge heater,NOT heat resistor.Check the following 
specifications for the assembled heater.
 
Specification:
 
Materail: Stainless Steel,PVC,Nylon
Voltage: 12V
Power: 40w
Wire Length :1m
Heater size: 6 x 15mm(D*L)
 
Package included:
 
1 x 1Pc 8 Types All Metal J-head Hotend Extruder For 1.75mm Filament RepRap MakerBot 3D Printer Accessories

Product Features

  • Materail: Stainless Steel,PVC,Nylon
  • Voltage:?12V
  • Power:?40w
  • Wire Length :1m
  • Heater size: 6 x 15mm(D*L)

Detailed Information available on our Homepage…

C.J. SHOP 10PCS PC4-01 straight in Pneumatic Straight Fitting for 4mm OD Reprap 3D Printer Bowden Line Tube

Feature:

Suitable for 4mm OD Reprap 3D Printer Tube.
The surface is smooth and the metal color is bright.
Easy to install and convenient to use.

Specification:

Type: PC4-M6
Aperture: 4mm
Diameter: 9mm
Material: Metal

Package included:

1 x PC4 M6 pneumatic tube

Product Features

  • Type: PC4-01 straight in
  • Aperture: 4mm
  • Diameter: 9mm
  • Material: Metal

Detailed Information available on our Homepage…

C.J. SHOP 5PCS Leveling Component Suite M3 Screw Leveling Spring Leveling Knob For 3D Printer Accessories

Feature:

Material: Stainless steel
Size: M3 x 40mm
Usage: 3D printing

Package included:

1 x Leveling Components M3 screw

Product Features

  • Material: Stainless steel
  • Size: M3 x 40mm
  • Usage: 3D printing

Detailed Information available on our Homepage…

How 3D Printing Can Benefit Your Machine Shop – Everett, WA

The state of Washington is very fortunate to have many of the best Precision CNC Machine Shops in the world located here. You’ve no doubt heard about 3D printing and may have seen 3D printers in use at local aerospace companies, but have you ever thought about where a 3D printer might fit in your CNC machine or model shop, and what it could potentially do for your company? This event will explore numerous application examples within a CNC machine shop where a 3D printer can improve efficiency , reduce cost, improve productivity and workflow, improve ergonomics, reduce scrap, improve shop safety, and differentiate your business from others. Please join us for a very informative session that details the positive impact a 3D printer can have on your CNC machine shop business.

C.J. SHOP 0.2mm to 0.5mm(set of 7cps) Drill Bits for 3D Printer Nozzle Cleaning Kit Reprap

Features:

Size: 0.2 / 0.25 / 0.3 / 0.35 / 0.4 / 0.45 / 0.5mm
7pcs in a protective plastics case
This powerful and useful tool pack contains 7 Sizes (0.2/0.25/0.3/0.35/0.4/0.45/0.5mm) which can provide great convenience for your 3D Printer nozzle cleaning
These drills can be used on CNC Machines, micro milling or drill machines, drill presses, or hand held tools such as dremel tools.
Excellent for plastic, fiberglass, steel, aluminium, copper and brass, titanium, Jewelry…

Package included:

1 x 7-Size 3D printer nozzle cleaning kit

Product Features

  • Size: 0.2 / 0.25 / 0.3 / 0.35 / 0.4 / 0.45 / 0.5mm
  • 7pcs in a protective plastics case
  • This powerful and useful tool pack contains 7 Sizes (0.2/0.25/0.3/0.35/0.4/0.45/0.5mm) which can provide great convenience for your 3D Printer nozzle cleaning
  • These drills can be used on CNC Machines, micro milling or drill machines, drill presses, or hand held tools such as dremel tools.
  • Excellent for plastic, fiberglass, steel, aluminium, copper and brass, titanium, Jewelry…

Click Here For More Information

SHoP Architects and Partners Create Giant 3D Printed Bamboo Pavilion for Design Miami

11887993_1137491266280072_2398578146957156356_nOn November 30, most of us, at least in my part of the country, will be dealing with gray skies, cold temperatures, and maybe snow. (Although maybe not – it’s sunny and 70° in Ohio today! I don’t understand, but I won’t complain.) If you’re like me, you may be ready to run away to some more pleasant location by then, and if you’re looking for an excuse, you can always check out Design Miami/, which will be taking place from November 30 to December 4 in the sunny Florida city.

Coinciding with the Art Basel fair, Design Miami/ will draw prominent designers, gallerists, collectors, critics and curators from around the world for exhibitions, trade, networking, panels and lectures. When visitors arrive, they will be greeted by a massive structure that resembles an ancient, gnarled tree with its branches bent to the ground. The 3D printed pavilion, which arches over visitors while at the same time giving them places to sit and rest, is the result of a collaborative project led by SHoP Architects.

design-miami-shop-architects-entrance-installation-designboom-02

[Image: SHoP via designboom]

The New York City architectural firm was awarded the 2016 Panerai Design Miami/ Visionary Award, which Italian watchmakers Officine Panerai will present to them at the fair. In addition to being honored with the award, which recognizes significant contributions to the field of design, SHoP Architects has been commissioned to design a public plaza at the entrance to the fair. The firm, which has become known for unconventional architectural design and next-generation fabrication techniques, has come up with a giant pavilion, dubbed “Flotsam and Jetsam,” for the fair’s entrance.

“SHoP is a place where people come together without any prescribed idea about what the esthetics of a building or public space should be, then we take complex problems and solve them with both beauty and technical proficiency,” said SHoP Founding Principal Gregg Pasquarelli. “Working with Design Miami has been a great experience and a perfect opportunity to explore the expressive possibilities of tomorrow’s architecture.”

shopFor assistance with the actual construction of the pavilion, SHoP reached out to Branch Technology, whose patented Cellular Fabrication Technology utilizes a giant robotic 3D printer to create freeform walls and other structural components. Additional construction help will come from Oak Ridge National Laboratory (ORNL), whose Big Area Additive Manufacturing (BAAM) machine is capable of 3D printing components up to 20 x 8 x 6 feet. ORNL will print elements of the pavilion with a biodegradable bamboo/PLA composite material, and will surpass their own record for largest solid 3D printed object.

SHoP has also enlisted partners Dassault Systèmes and Thornton Tomasetti to help manage the project. The installation will encompass all of the elements that make modern design technology like 3D printing so exciting: creative freedom, sustainable materials, large-scale production capabilities and more.

ed6bd57545884d4aa07311e892ebdfb5

Over 12,000 pounds of bamboo-reinforced PLA will be used for the pavilion. [Image: reddit]

“SHoP represents exactly what the Panerai Design Miami/ Visionary Award is meant to recognize: innovation, inspiration and an outstanding point-of-view,” said Rodman Primack, Chief Creative Officer of Design Miami/. “For the first time, we will be installing the commission long-term in the Miami Design District and I cannot think of a better practice to conceive this installation. We are thrilled with the pavilion design and delighted to honor SHoP for the 12 th edition of Design Miami.”

Once Design Miami is over, the pavilion will be permanently installed in the Miami Design District’s Jungle Plaza as a space for outdoor cultural events. That space will be officially launched, in partnership with the Institute of Contemporary Art, Miami, next year alongside a community program aimed at bringing public sculptural art to the city.

[Sources/Images: designboom, reddit]