[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2017 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here If You Need More Detailed Info…

[Sintron] 3d Printer Kit , Ramps 1.4 + Mega 2560 + 5pcs A4988 Stepper Driver w/ Heatsink + LCD 12864 Smart Controller + 3 Pcs End Stop + Mk2b Heat Bed + 2 Pcs Pulley + 2m Gt2 Belts for Reprap Prusa i3

Overview:

This kit is a good start for starter to build your own 3D printer. basically once you get the electronic parts done. then later it would be more easier to complete the rest parts.and yes, this is almost all the electronics you need for your 3D Printer.(except motors and extruder hotend)
If you are not sure what you need to complete your 3d printer project, please feel free to ask. We not just sell them, we also provide professional after-sales service, We will offer you a detailed tutorials including project introduction and their source codes. so welcome to discuss with us, we will try to do technical support as much as we can.

(1)3D Printer Controller RAMPS 1.4 – You can check:https://www.amazon.com/dp/B06WP5DDP1

(2)Mega 2560 R3 – You can check:https://www.amazon.com/dp/B00E94CGTQ

(3)LCD 12864 Graphic Smart Display Controller – You can check:https://www.amazon.com/dp/B00L72FAZU

(4)A4988 Stepper Motor Driver with Heatsink – You can check:https://www.amazon.com/dp/B00JXGT1G6

(5)Mechanical Endstop Switch – You can check: https://www.amazon.com/dp/B00OCFEZ1O

(6)2M GT2 Belt + 2 pcs GT2 20 Tooth Pulleys – You can check: https://www.amazon.com/dp/B00OFUZSP8

(7)MK28 Heatbed:This is the latest version of MK2B,100% compatible with all Prusa and Mendel 3d printer variants.

Package List:

(1)3D Printer Controller RAMPS 1.4 x1
(2)Mega 2560 R3+USB Cable x1
(3)A4988 Stepper Motor Driver with Heatsink x5
(4)LCD 12864 Smart Controller x1
(5)MK28 Heatbed with Thermistor and High Temp Wire x1
(6)Mechanical Endstops x3
(7)2M GT2 Belt+20 Tooth Pulleys x2
(8)Smart Adapter x1
(9)30cm Cable x2
(10)Storage Box x1

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1 + Mechanical Endstops x 3
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) MK28 Heated Bed with Thermistor and High Temp Wire x 1

Click Here If You Need More Detailed Info…

[Sintron] 3D Printer Kossel Mini Prime Line Roller Carriage Wheel + 696ZZ Bearing, Replace Linear Rail MGN12 for RepRap Rostock Delta Kossel Mini

Overview

Building a Kossel Mini? If you can’t find the suitable way for vertical movement, and want to save over $50, this part gives you another option.

This roller carriage wheel kit is suitable for Kossel or delta style printers which it use 20mm x 20mm Openbeam Aluminum Extrusion. due to the Linear Rail MGN12 are too expensive ($150), or not long enough (only 400mm limits Kossel size to slightly over 600mm), so use this kit you will get more than 20mm extra build volume and gain a few extra cm on print height.

Specifications

(1) Roller Wheel Size : ID=6mm, OD=22.5mm, width=7mm

(2) Roller Wheel Material : POM

(3) Profile Type : Round Type

(4) Bearing Model : 696ZZ (ID=6mm, D1=15mm, W1=5mm)

(5) Bearing Material : Carbon Steel

(6) Seal Type : ZZ

(7) Color : Black

(8) Surface Treatment : Polishing, Lathing

(9) Unit Weight : about 10g

(10) Usage : 3D Printer, Door, Window, Roller Shutter, Furniture Fitting, Cabinet, and Drawer ect.

Package List

(1) Roller Carriage Plastic Printed Part x 3

(2) POM Roller Wheel with 696ZZ Bearing x 9

(3) M3 * 10mm screw x 6

(4) M3 * 25mm screw x 3

(5) M3 nut x 9

Product Features

  • (1) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !
  • (2) Usage : 3D Printer, Door, Window, Roller Shutter, Furniture Fitting, Cabinet, and Drawer ect.
  • (3) This roller carriage wheel kit is suitable for Kossel or delta style printers which it use 20mm x 20mm Openbeam Aluminum Extrusion.

Visit The Website For More Information…

[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2016 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here For More Information

[Sintron] 3D Printer Kossel Mini Full Complete Kit + Auto level + Bowden hotend + MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988+NEMA17 Motor+Endstop+MK3 Heatbed for RepRap Rostock Delta

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print.

After successfully launched Sintron first DIY 3D printer model Prusa i3. (http://www.amazon.com/dp/B00WMBFON8), this one is Sintron’s 2nd DIY kit : Kossel, This kit include all the parts you need for building Kossel Mini 3D printer. and as always, we will provide our professional advise if customer is not familiar with it, so you are not just buying the hardware, you also got our tech support for this kit !

The difference between this kit with others are : We provide MK3 heated bed, auto level probe function, MK8 extruder and excellent bowden hotend.

Sintron 3D printer Kossel Mini Demo : http://www.youtube.com/v/Jg1kncqn6PE

Sintron 3D printer Kossel Mini Auto Leveling : http://www.youtube.com/v/bRYlnEDt_QQ

Package list and Kossel Mini Specifications : please check the main picture for list.(Please notice : the filament on top is not included in this transaction)

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it !

RAMPS 1.4- http://www.amazon.com/dp/B00JU41GQ4

Mega 2560- http://www.amazon.com/dp/B00E94CGTQ

LCD 2004- http://www.amazon.com/dp/B00K6KCYEE

A4988- http://www.amazon.com/dp/B00JXGT1G6

Kossel Extruder- http://www.amazon.com/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.com/dp/B011MWF3QU

Endstop- http://www.amazon.com/dp/B00OCFEZ1O

Product Features

  • (1) This kit include all the parts you need for building Kossel Mini 3D printer.
  • (2) Compared to 3D Printer Prusa i3 Model : easier to assemble, faster printing, print higher objects.
  • (3) This 3D printer has a simple structure, light and portable, beautiful and trendy. Especially suitable for DIY amateur, artistic design, architectural design, education, 3D photo studio, can be used for printing different items like small components model, decoration, etc.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here If You Need More Detailed Info…

[Sintron] 3D Printer Kossel Mini Full Complete Kit + Auto level + E3D Bowden hotend + MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988+NEMA17 Motor+Endstop+MK3 Heatbed for RepRap Rostock Delta

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print.

After successfully launched Sintron first DIY 3D printer model Prusa i3. (http://www.amazon.co.uk/dp/B00WMC1RS8), this one is Sintron’s 2nd DIY kit : Kossel, This kit include all the parts you need for building Kossel Mini 3D printer. and as always, we will provide our professional advise if customer is not familiar with it, so you are not just buying the hardware, you also got our tech support for this kit !

The difference between this kit with others are : We provide MK3 heated bed, auto level probe function, MK8 extruder and excellent bowden hotend.

Sintron 3D printer Kossel Mini Demo : http://www.youtube.com/v/Jg1kncqn6PE

Sintron 3D printer Kossel Mini Auto Leveling : http://www.youtube.com/v/bRYlnEDt_QQ

Package list and Kossel Mini Specifications : please check the main picture for list.(Please notice : the filament on top is not included in this transaction)

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it !

RAMPS 1.4- http://www.amazon.com/dp/B00JU41GQ4

Mega 2560- http://www.amazon.com/dp/B00E94CGTQ

LCD 2004- http://www.amazon.com/dp/B00K6KCYEE

A4988- http://www.amazon.com/dp/B00JXGT1G6

Kossel Extruder- http://www.amazon.com/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.com/dp/B011MWF3QU

Endstop- http://www.amazon.com/dp/B00OCFEZ1O

Product Features

  • (1) This kit include all the parts you need for building Kossel Mini 3D printer.
  • (2) Compared to 3D Printer Prusa i3 Model : easier to assemble, faster printing, print higher objects.
  • (3) This 3D printer has a simple structure, light and portable, beautiful and trendy. Especially suitable for DIY amateur, artistic design, architectural design, education, 3D photo studio, can be used for printing different items like small components model, decoration, etc.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here If You Need More Detailed Info…

[Sintron] Kossel Mini Electronic Full Kit for DIY RepRap Rostock Delta 3D Printer with E3D Bowden hotend + MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988 + NEMA 17 Motor + Endstop

This kit are included all the electronics parts you need for 3D printer Kossel Mini Rostock Delta (except power supply, which you can use PC ATX power), so after you purchase this kit, then can start your project right away, no need to worry about what might be missing again. The parts we selected are all with very good quality, also we provide support while you are building it, if you have questions, please feel free to send us an email, we will also help you to complete the project !

Below are the details of parts, please read carefully, because there are many other sellers might sell you the bad and cheap quality, and cause you the whole system crash, wrong wiring is possible to burn all the parts , so please be careful while using it ! (especially the bowden hot-end and extruder cold-end)

RAMPS 1.4- http://www.amazon.com/gp/product/B00JU41GQ4

Mega 2560- http://www.amazon.com/dp/B00E94CGTQ

LCD 2004- http://www.amazon.com/gp/product/B00K6KCYEE

A4988- http://www.amazon.com/gp/product/B00JXGT1G6

Kossel Extruder- http://www.amazon.com/dp/B011QCFGPO

Kossel Heatbed- http://www.amazon.com/dp/B011MWF3QU

Endstop- http://www.amazon.com/gp/product/B00OCFEZ1O

Package List :

(1) 1x 3D Printer Controller Ramps 1.4 Board

(2) 1x Arduino-Compatible Mega 2560 R3 + USB Cable

(3) 5x A4988 StepStick Stepper Motor Driver Module

(4) 1x LCD 2004 Smart Display Controller + Smart Adapter

(5) 1x All Metal MK8 Extruder & Bowden hotend + 40x40x10mm fan

(6) 3x NEMA 17 Motor

(7) 1x Round MK3 Heatbed + thermistor and wire

(8) 6x Mechanical Endstop + Cable

(9) 2x 30cm Ribbon Cable

(10) 1x 40pin Dupont cable 200mm Male to Female

(11) Filament (few for test)

Product Features

  • (1) We use well-designed Kossel MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, We have made necessary design, Printing speed up to 100mm/s.
  • (2) We use the latest MK3 Heatbed Round 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. this would reduct your calibration time a lot !
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don’t have to spare one computer for your 3D printer use only.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Click Here If You Need More Detailed Info…