SUNLU 1.75mm PLA 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 2.2 LBS (1KG) Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen, skin


Product Features:
SUNLU PLA 3D Printer Filament is especially designed and developed for most 3D printer on the market today. Its main features are as follows:
1. SUNLU PLA gives off a smell similar to a semi-sweet cooking oil. While it certainly won’t bring back fond memories of home-cooked meals, it is considered by many an improvement over hot plastic.
2. SUNLU PLA displays less warping. This is the reason why it is possible to print without a heated bed.
3. SUNLU PLA filament is made for 3D printers with degradable bio-plastic.
4. SUNLU PLA filament Printed objects will generally have a glossier look.
5. SUNLU PLA 3d printing filament is compatible with most commercially available non-cartridge based 3D printers. 6. Backed by our 100% SATISFACTION GUARANTEE.

Product specifications:
Brand: SUNLU
Material: PLA
Diameter: 1.75mm
Tolerance: +/- 0.02mm
Print temperature: 190-220℃(374-428℉)
Print speed: 50-100mm/s
Baseplate temperature: No heating required
Bubble: 100% zero-bubble
Length: 1.75mm (1kg=2.20 lbs) = 330m

Quick start guide for PLA printing material
The first layer is the most important part of any print. There are a few things you need to do to get the first layer to stick well.
1. You need the print bed (or print surface) to be level.
2. You need the extruder to be homed to the correct height from the bed.
3. You need a good base material for your PLA to adhere to.

How to store:
1. Keep material in sealed bag until ready for use.
2. Avoid Water. Keep in dry place.
3. Keep away from heat.
4. Recommended storage temperature: -20 to 50℃(68-122℉)

SUNLU PLA 3D Printer Filament, “Add to Cart” right now & Enjoy 90 Days Money Back and 2-Year WARRANTY!
Alibaba wholesale station: https://sunlugw.en.alibaba.com
Globalsources wholesale station: http://sunlugw.manufacturer.globalsources.com

Product Features

  • SUNLU PLA 3D filament Accurate diameter: 1.75mm, variations + /-0.2mm,roundness +/-0.05mm,1KG (approximately 2.20 lbs) Spool=330 meters.
  • PLA Recommend Temperature: Extrusion/Nozzle Temperature 190°C – 220°C (356°F – 410°F),PLA fialment can be processed at 185 degrees.
  • PLA(Polylactic Acid) Material: Good toughness high strength, high stiffness,low shrinkage, thermoforming dimensional stability.
  • SUNLU PLA has a low melt strength, easier shaping print model,No block nozzle, good stick hot bed, a smooth PLA used.
  • Safe and Odorless: PLA has a sweet smell when burning and doesn’t produce harmul fumes during printing.

Check Out Our Website For Details…

5 PCS Pedicure Set Remove Dead Rough Skin Callous Remover Foot Rasp With 10PCS Blade

Pedicure Set 5 piece pedicure set Includes callous/corn slicer with spare blades, Foot skin “grater”, small metal foot file and 10PCS blade Perfect for your feet

Product Features

  • 5 piece pedicure set
  • Includes callous/corn slicer with spare blades, Foot skin “grater”, small metal foot file and 10PCS blade
  • a pink buffer to smooth, a stainless steel file to shape and a metal cuticle trimmer.
  • Material:Stainless steel
  • Perfect for your feet.

Visit The Website For More Information…

S7 Case,Samsung Galaxy S7 Case – Candy Color Kidding Words Series Full Edge Protective Drop Protection Shock-absorption Soft TPU Rubber Skin Gel Slim Fit Cover by Badalink – Pink

Description:

- BADALink has been dedicated to develop and provide accessories for mobile. We believe, in BADALink you can choose what you like.

Characteristics:
- New fashion design, very novel, cute,and popular. more attractive and unique.
- Perfect cut outs for your phone.

Note: 1.We express item(s) by ePacket delivery ,it usually takes 7-20 days to the destination , you may track shipping information on www.USPS.com ! 2.To protect the items,we will package item(s) with foam plastic bag.

Product Features

  • 100% brand new, not for S7 Edge, designed specially for Samsung Galaxy S7.
  • Cute kidding English words design, fanny and individual.
  • Soft TPU case acts as a natural cushion, protect your phone from scratches, dusts, collisions and abrasion.
  • High quality, fully tested for your peace of mind.
  • Precisely cut openings to allow full access to all the functions of your phone.

Detailed Information available on our Homepage…

OOCEE Gold 3D Carbon Fiber Decal Cover Skin Sticker For XBOX One Console Controller Kinect Sticker

Fashion Gaming Style Skin

MAKE YOUR XBOX ONE A NEW LOOK !!

Product Description:

Easy Installation

Highest Quality, removable adhesive backed.

protect your XBOX One from dust and scratches

Can be easily and completely removed

if you do not want it any more.

(WITHOUT leaving a sticky residue)

PACKAGE:

1 X set skin for Xbox ONE Console

2 X controller skins (as the pictures show)

1 X kinect skin (as the pictures show)

Note:

Not include the kinect£¬the Console and the Controller.

Product Features

  • Easy Installation
  • High Qualityi, removable adhersive backed
  • Protect your video game console from dust and scratches
  • Can be easily and completely removed, if you do not want it anymore.

Detailed Information available on our Homepage…

LOVEdecal 3D Black Carbon Fibre Full Body Skin Sticker IPhone 5 3M

Fashion¡¢personalized and high resolution designed sticker make your Apple device amazing and unique. the sitcker can be easily applied and removed without any residue Super-thin skin with only 0.3MM thickness supply enough protection for your beloved device, to keep it far away from dust,oil,water,finger print and others. Precious cut for a guaranteed fit and Smart desgin allows easy access to all buttons. controls & posts. Compatible with : Apple iPhone 5 This is only a soft skin sticker but not a hard case or cover. High quality Vinyl material: 3M Package include: one sticker,one cardboard with introduction

Product Features

  • skins are made of premium automotive-grade cast vinyl with a special adhesive backing to prevent air bubbles during installation and leave no residue when removed. Our skins are strong but super thin, measuring about 5 mil total – or five thousandths (0.005) of an inch – that’s thin! It also means they’ll work with just about any kind of dock, charger or case on the market
  • ?skin kits can be installed by just about anyone and do not require any expertise or special tools. When it’s time for a change, simply peel it off and apply a new one!
  • We use state-of-the-art large format printers and full-colour UV resistant inks to deliver vibrant, photo quality images on every skin. After printing, skins are covered with a clear protective coating in your choice of finishes.
  • High quality Vinyl material: 3M
  • The normal scuffs, nicks and scratches that make the surfaces of a device look worn are a thing of the past where it’s covered with our durable skins. They provide lightweight protection without adding weight or bulk to your favourite devices.

Detailed Information available on our Homepage…

L'Oreal is 3D printing its own human skin to test cosmetics

The L’Oreal Group hasn’t tested its products on animals worldwide since 2013, instead relying on a predictive model that utilizes a “Reconstructed Human Epidermis” — basically bits of skin grown in a lab — to ensure that its products are safe. Now the French cosmetics giant is teaming up with 3D bioprinting company Organovo to create the real thing…or at least as real as human skin that comes out of an ink jet nozzle can be.

L’Oreal has, in fact, been growing skin since the 1980s. A 60-person team grows roughly 100,000 skin samples every year (that’s 5 square meters of skin or a full cow’s-worth annually) at its lab in Lyon. Currently, the company receives bits of donor skin from plastic surgery procedures. Then L’Oreal breaks the samples down into individual cells, re-cultures and grows them into .5 cm testing squares. The whole process takes about a week to complete but could soon be done much faster thanks to Organovo’s NovoGen Bioprinting Platform. This device uses a pair of printer heads — one for placing human cells, the other for placing a hydrogel support matrix — to create skin samples on a commercial scale.

The program is still in its planning stages but should it come to market, the cosmetics company will retain exclusive rights to the samples for use in non-prescription skin care products. Organovo, on the other hand, will have the right to sell the tissues for prescription drug and toxicity testing as well as for future organ transplants. The bioprinter has already partnered with Merk to create liver and kidney tissues (the first samples of which should be ready by next year) but this reportedly is the first time the beauty industry has employed such technology.

[Image credit: Organovo]

Skinyourskunk Snakeskin-3D Premium Vinyl Guitar Skin Standard Size 20Wx15H

Skinyourskunk is a designer of over 1000 affordable, high definition premium vinyl guitar skins and guitar wraps for your electric or acoustic guitar or bass. The largest selection of beautiful, high-quality skins anywhere! our guitar skins are easy to install, high definition, un-cut and printed on marine grade vinyl with a clear coat and adhesive backing for durability, long-life and a professional paint like finish. We offer custom sizes to fit any style electric, bass or acoustic guitar (les paul style in pictures are used as examples only). We produce our skins using high-definition printing methods on $15000 printers and on the best quality vinyl material available. Our huge library of high resolution, high-definition, photo quality, paint like designs fit your mood, attitude and style. Our skins are un-cut to allow for a customized installation and positioning making each guitar skin completely unique. Because your guitar skin is a personal selection of a specific size, we print your skin after receiving your order specifically for your guitar. Therefore, please make sure the design and size are correct as we are unable to accept returns based upon incorrect sizing or choice of design. Skinyourskunk is operated by guitar players and provides products for guitar players. Our quality and reputation…and your satisfaction…is our goal. We provide skin installation instructions on our website at skinyourskunk, including videos and tips so you know exactly how easy installation is to complete. We ship your skin via usps in a hard, cardboard tube with delivery confirmation and tracking right to your door. Make your boring guitar, bass or acoustic awesome with a skinyourskunk guitar skin today!

Product Features

  • High definition, full color graphics printed on premium quality, marine grade vinyl.
  • Adhesive backed for durability, high-gloss clear coat.
  • Our skins fit any electric, bass or acoustic guitar. Please choose the size that fits your guitar.
  • Our uncut skins are easy to install in about 1 hour see instructions at skinyourskunk
  • Standard 20 inches in width by 15 inches in height. Fits strat, tele, les paul, sg, pr, etc.

Visit The Website For More Information…