CCTREE 1.75mm ABS 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs) White

Welcome to CCTREE 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm. 

ABS (Acrylonitrile butadiene styrene) is an oil based filament and has a higher melting point than PLA. ABS filament is commonly used in 3D printing. It has the following characteristics: 

• Softer than PLA, but high strength, good toughness; 
• Density is small, when printing larger volume model lighter, save money; 
• Cost-effective, can be processed in wide range temperature; 
• Accurate diameter: 1.75mm, variations + /-0.05mm, roundness +/-0.03mm;

Product Features

  • 1.75mm diameter, 1kg net weight, ABS Filament
  • Spool Size:diameter 200mm + inner hub 55mm
  • ABS (Acrylonitrile Butadiene Styrene) 3D Printing Filament Vacuumed Sealed With Desiccant
  • Print Temperature: 220 – 250°C, depending on printer model
  • Compatible with Makerbot,UP,Afinia,Leapfrog Creatr, Builder,Reprap,Felix, Ultimaker and any other FDM 3D printers

Check Out Our Website For Details…

CCTREE 2.85mm (3mm) PLA 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Green

Welcome to CCTREE 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 2.85mm diameter filament, with a dimensional accuracy of +/- 0.05mm. 

PLA(Polylactic acid) is a environmentally friendly materials that can easy to be degradated and without smell. It is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed. It is the ” default ” recommended material for many desktop 3D printers. It has the following characteristics:

• Good toughness high strength, high stiffness
• No block nozzle, good stick hot bed, a smooth PLA used
• Low shrinkage, thermoforming dimensional stability
•Accurate diameter: 2.85mm, variations + /-0.05mm, roundness +/-0.03mm

Product Features

  • 2.85mm diameter, 1kg net weight, PLA Filament
  • Spool Size:diameter 200mm + inner hub 55mm
  • PLA (Polylactic Acid) 3D Printing Filament Vacuumed Sealed With Desiccant
  • Print Temperature: 190 – 220°C, depending on printer model
  • Compatible with Makerbot,UP,Afinia,Leapfrog Creatr, Builder,Reprap,Felix, Ultimaker and any other FDM 3D printers

Check Out Our Website For Details…

BuMat PLAFG-E Elite PLA Filament 1.75mm 1kg 2.2lb Printing Material Supply Spool for 3D Printer, Fluorescent Green

BuMat Elite Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

Product Features

  • 1.75mm ABS at 2.2 lb. (1KG)
  • User defined melting temperature at between 160 – 180 C
  • Diameter of the filament: 1.75mm
  • Easy to use and performs well on most prints
  • Air Tight Sealed in a plastic bag

Check Out Our Website For Details…

iXCC ABS 3D Printer Filament 1.75mm Diameter (Dimensional Accuracy +/- 0.05mm) – 1kg Spool (Approximately 2.2 lbs) [White]

Manufacture Limited Warranty

This iXCC product is offered with limited manufacture warranty.

The limited warranty period for the Product extends for 2-Year from the date of purchase.

Product Features

  • Made of ABS (Acrylonitrile Butadiene Styrene) material, a plastic that is petroleum based. No kinks or breaks
  • Specifically designed for most 3D Printer and 3D Pen in the market, such as MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2 and etc
  • Vacuumed Sealed With Desiccant. Recommended Printing Temperature 210°C – 250°C (410°F – 482°F )
  • 8 Rich Colorful Filaments for Men and Women to Choose: Black, White, Red, Orange, Yellow, Green, Blue and Purple
  • 2-year warranty ensures long-lasting enjoyment of your purchase. Please contact seller for detail

Check Out Our Website For Details…

eSUN 3mm Cool White PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Cool White

eSUN 3D Printer Filament: PLA PRO

Size: 3mm nominal, 2.85 +/-0.05mm actual

Extrusion Temperature Range: 210 to 225 Celsius

PLA PRO(PLA+) Advantages:

Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.

PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products.

Product Features

  • 1KG net (approximately 2.2 lbs) Filament with Clear Spool
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
  • 3mm Filament Diameter (Dimensional Accuracy +/- 0.05mm), Actual Diameter 2.85mm +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 210C – 225C
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″

Check Out Our Website For Details…

IC3D Natural 1.75mm Nylon 3D Printer Filament – 2lb Spool – Dimensional Accuracy +/- 0.05mm – Professional Grade 3D Printing Filament – MADE IN USA

IC3D® – For 3D Printers, By 3D Printers (TM) Spend more time printing with high-quality 3D printer filament from IC3D®. IC3D® extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.10mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, vacuum sealed with desiccant, and packaged. IC3D® filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. Every spool of IC3D® filament is backed by a 100% SATISFACTION GUARANTEE.

Product Features

  • 2.1lb of 1.75mm Nylon 3D printer filament | Similar to Taulman Bridge Nylon
  • Filament diameter is 1.75mm +/-0.5mm, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1
  • Printing Temperature range is 245 – 260C | Bed Temperature 40C – 70C
  • Made in the USA under strict quality standards
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

Check Out Our Website For Details…

CCTREE PLA 3D Printing Filaments2.85mm Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Blue

Welcome to CCTREE 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 2.85mm diameter filament, with a dimensional accuracy of +/- 0.05mm. 

PLA(Polylactic acid) is a environmentally friendly materials that can easy to be degradated and without smell. It is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn’t require a heated bed. It is the ” default ” recommended material for many desktop 3D printers. It has the following characteristics:

• Good toughness high strength, high stiffness
• No block nozzle, good stick hot bed, a smooth PLA used
• Low shrinkage, thermoforming dimensional stability
•Accurate diameter: 2.85mm, variations + /-0.05mm, roundness +/-0.03mm

Product Features

  • 2.85mm diameter, 1kg net weight, PLA Filament
  • Spool Size:diameter 200mm + inner hub 55mm
  • PLA (Polylactic Acid) 3D Printing Filament Vacuumed Sealed With Desiccant
  • Print Temperature: 190 – 220°C, depending on printer model
  • Compatible with Makerbot,UP,Afinia,Leapfrog Creatr, Builder,Reprap,Felix, Ultimaker and any other FDM 3D printers

Check Out Our Website For Details…