Aluoflower TMC2100 Stepper Motor Driver Super Silence Module Heat Sink for 3D Printer Parts


Description:

Features:
100% brand new and high quality.
Drive current algorithm and regulation.
1. drive current algorithm: i=Vref*1.9/2.5, the default Vref about 0.65v, so the default current 0.5A, the maximum current 1A
2. Vref measurement of Gnd and potentiometer intermediate voltage.
3. Don’t connect to the motor when measuring voltage, otherwise it is easy to burn the drivers.
4. the measurement of the voltage should be switched on. Don’t just connect the USB power supply.
Attention: please put TMC2100 drivers in the correct direction on the board.

Use of the TMC2100 drive module:
1. When use in the Ramps1.4 or MKS Gen, or Lerdge touch screen motherboard, please remove the 3 jumper cap under the socket.
2. Please pay attention to direction.
3. The heat sink directly attached to the PCB.
4. The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change to 4988.
And if you use the Lerdge motherboard, please set the direction directly in the setting page of direction of the motor.

Specifications:
Name: TMC2100 Stepper Motor Driver
Color: White + Blue
Size: 2×1.5×1.2cm / 0.79×0.59×0.47in (Approx.)
Heat Sink size: 1.2×0.9×1.2cm/0.47×0.35×0.47in (Approx.)
Application: 3D printing
Quantity: 1PC (other accessories demo in the picture is not included)

Package includes:
1 X TMC2100 Stepper Module With Heat Sink

Product Features

  • 100% brand new and high quality.
  • Super silence in working.
  • Drive current algorithm: i=Vref*1.9/2.5, the default Vref about 0.65v, the default current 0.5A, the maximum current 1A
  • Size: 2×1.5×1.2cm / 0.79×0.59×0.47in (Approx.)
  • Heat Sink size: 1.2×0.9×1.2cm/0.47×0.35×0.47in

Visit The Website For More Information…

[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2017 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here If You Need More Detailed Info…

3D Printer Nema 17 Stepper Motor 1.7A 64oz.in 4 Wire 1m Wire W/ Molex Connector

This is the most popular model in 3D printer market, with 1.8°step angle (200 steps/revolution).
Each phase draws 1.68A, allowing for a holding torque of 45Ncm(64oz.in).
This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications.
The motors are supplied with a 1 metre long power cable with a 4-pin Molex female connector already fitted – ready to plug and print!

Electrical Specification:

* Manufacturer Part Number: 17HS19-1684S1
* Motor Type: Bipolar Stepper
* Step Angle: 1.8°
* Holding Torque: 45Ncm(64oz.in)
* Rated Current/phase: 1.68A
* Phase Resistance: 1.65ohms
* Recommended Voltage: 12-24V
* Inductance : 2.8mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 42 x 42mm
* Body Length: 48mm
* Shaft Diameter: Φ5mm
* Front Shaft Length: 24mm
* Number of Leads: 4
* Lead Length: 1000mm
* Weight : 390g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • RepRap Prusa, Mendel 90, Rostock 3D Printer Motor
  • NEMA-17 bipolar 48mm 4-wire
  • 1.8° step angle(200 steps/rev)
  • Rated current 1.68A & resistance 1.65ohms
  • 44Ncm(62.3oz.in) holding torque

Click Here If You Need More Detailed Info…

[Sintron] 3d Printer Kit , Ramps 1.4 + Mega 2560 + 5pcs A4988 Stepper Driver w/ Heatsink + LCD 12864 Smart Controller + 3 Pcs End Stop + Mk2b Heat Bed + 2 Pcs Pulley + 2m Gt2 Belts for Reprap Prusa i3

Overview:

This kit is a good start for starter to build your own 3D printer. basically once you get the electronic parts done. then later it would be more easier to complete the rest parts.and yes, this is almost all the electronics you need for your 3D Printer.(except motors and extruder hotend)
If you are not sure what you need to complete your 3d printer project, please feel free to ask. We not just sell them, we also provide professional after-sales service, We will offer you a detailed tutorials including project introduction and their source codes. so welcome to discuss with us, we will try to do technical support as much as we can.

(1)3D Printer Controller RAMPS 1.4 – You can check:https://www.amazon.com/dp/B06WP5DDP1

(2)Mega 2560 R3 – You can check:https://www.amazon.com/dp/B00E94CGTQ

(3)LCD 12864 Graphic Smart Display Controller – You can check:https://www.amazon.com/dp/B00L72FAZU

(4)A4988 Stepper Motor Driver with Heatsink – You can check:https://www.amazon.com/dp/B00JXGT1G6

(5)Mechanical Endstop Switch – You can check: https://www.amazon.com/dp/B00OCFEZ1O

(6)2M GT2 Belt + 2 pcs GT2 20 Tooth Pulleys – You can check: https://www.amazon.com/dp/B00OFUZSP8

(7)MK28 Heatbed:This is the latest version of MK2B,100% compatible with all Prusa and Mendel 3d printer variants.

Package List:

(1)3D Printer Controller RAMPS 1.4 x1
(2)Mega 2560 R3+USB Cable x1
(3)A4988 Stepper Motor Driver with Heatsink x5
(4)LCD 12864 Smart Controller x1
(5)MK28 Heatbed with Thermistor and High Temp Wire x1
(6)Mechanical Endstops x3
(7)2M GT2 Belt+20 Tooth Pulleys x2
(8)Smart Adapter x1
(9)30cm Cable x2
(10)Storage Box x1

Product Features

  • (1) 3D Printer Controller RAMPS 1.4 x 1 + Mechanical Endstops x 3
  • (2) Arduino-Compatible Mega 2560 R3 With USB Cable x 1
  • (3) A4988 Stepper Motor Driver With Heatsink x 5
  • (4) LCD 12864 Graphic Smart Display Controller Kit x 1
  • (5) MK28 Heated Bed with Thermistor and High Temp Wire x 1

Click Here If You Need More Detailed Info…

Nema 14 Bipolar Stepper Motor 5.4V 0.8A 25.5oz.in/18Ncm 3D Printer

This hybrid bipolar Nema 14 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 800 mA at 5.4 V, allowing for a holding torque of 18Ncm(25.5oz.in).

Electrical Specification:

* Manufacturer Part Number: 14HS13-0804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 18Ncm(25.5oz.in)
* Rated Current/phase: 0.8A
* Phase Resistance: 6.8ohms
* Inductance: 10mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 35 x 35mm
* Body Length: 34mm
* Shaft Diameter: 5mm
* Shaft Length: 24mm
* D-cut Length: 16.5mm
* Number of Leads: 4
* Lead Length: 400mm
* Weight: 190g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • Middle Size with Hight Torque
  • 18Ncm(25.5oz.in) holding torque
  • NEMA 14 bipolar 1.38″x1.38″x1.34″ 4-wir
  • 1.8 deg. step angle(200 steps/rev)
  • Rated current 0.8A & resistance 6.8ohms

Visit The Website For More Information…

Professional 3D printer CNC Kit for arduino, Kuman GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with heat sink + Nema 17 Stepper Motor

CNC Shield Board:
Latest CNC Shield Version 3.0 for arduino
GRBL 0.9 compatible
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
Coolant enable
Compatible with A4988 or DRV8825 stepper driver
Runs on 12-36V DC

DRV8825 Stepper Motor Driver:
Stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It’s not arduino official board but it’s compatible with all arduino software and hardware)

Nema 17 Stepper motor Specification:
Model No.:17HD48002H-22B
Step Angle: 1.8 deg.
Holding Torque: 59Ncm(84 oz.in)
Rated Current/phase: 1.7A
Frame Size: 41 x 41mm
Body Length: 47mm
Shaft Diameter: 5mm
Shaft Length: 22mm
Weight: 380g

Mechanical Endstop Connection description:
Red line connect VCC (ramps of +)
black wire connect the GND (ramps of -)
Green Line connect SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Advantage: Easy to install, the more common used styles
Length of Cable: 70 cm

Package Contents:
1 x CNC Shield Board
1 x Kuman UNO R3 Board 
4 x DRV8825 Stepper Motor Driver
4 x Aluminum heatsink w/ 3M tape backing
3 x Nema 17 stepper motor 1.7 A (with bracket and screw)
3 x Nema 17 Stepper Motor Mounting Bracket
12x M3 Screws for bracket of stepper motor
3 x Mechanical Switch Endstop
3 x 3Pin 70cm Cable
1 x 1.5m USB cable for R3 Board

Product Features

  • Latest CH340G CNC Shield expansion board Version 3.0 for Arduino
  • Kuman UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable
  • 4pcs DRV8825 Stepper Motor Driver with heat sinks
  • 3pcs NEMA-17 Stepper Motor 84 oz.in (59 Ncm) 47mm Body 1.8 degree with mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12 pcs M3 Screws
  • 3pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with 3Pin 70cm Cable

Click Here If You Need More Detailed Info…

Longruner 3d Printer Controller Kit Mega 2560 R3 + Ramps 1.4 + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino Reprap

Update High Quality Ramp Board by changing MOSFET: Old MOSFET IC Model : PDF55N06 Specification:VDSS:60V ID:55A New MOSFET IC model: HM60N06 Specification:VDSS:60V ID:60A HM60N06 current up to 60A, More safety Package List: (1) RAMPS 1.4 x 1 (2) Kuman Mega 2560 R3 x 1 (3) A4988 Stepper Motor Driver with Heatsink x 5 (4) LCD 12864 Graphic Smart Display Controller x 1 (5) Smart Adapter x 1 (6) Cable x 2 (7) USB Cable x 1

Product Features

  • 2017 Updated Version 3D Printer Controller RAMPS 1.4 It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
  • Mega 2560 compatible with arduino.
  • LCD 12864 Graphic Smart Display Controller This full graphic Smart Controller contains a SD-Card.
  • A4988 Stepper Motor Driver A4988 is a complete microstepping motor driver with built-in translator for easy operation.
  • Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.

Click Here If You Need More Detailed Info…