[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2017 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here If You Need More Detailed Info…

Elegoo Mega 2560 Project The Most Complete Ultimate Starter Kit w/ TUTORIAL, MEGA 2560 controller board, LCD1602, Servo, Stepper Motor for Arduino Mega2560 UNO Nano

Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.

Component listing:
25pcs LED ( white,yellow,blue,red,green)
1pcs RGB LED
10pcs Ceramic Capacitor(22pf & 104pf)
2pcs Photoresistor
1pcs Thermistor
5pcs Diode Rectifier (1N4007)
4pcs Electrolytic Capacitor (10UF 50V & 100UF 50V)
10pcs NPN Transistor (PN2222 & S8050 )
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
1pcs Sound Sensor Module
1pcs LCD1602 Module ( with pin header)
1pcs IC L293D
1pcs IC 74HC595
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs RTC Module
1pcs DHT11 Temperature and Humidity Module
2pcs Potentiometer
1pcs Rotary Encoder Module
1pcs Joystick Module
1pcs Keypad Module
1pcs 5V Relay
1pcs IR Receiver Module
1pcs MEGA2560 Controller Board
1pcs Breadboard
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Prototype Expansion
1pcs Power Supply Module
1pcs HC-SR501 PIR Motion Sensor
1pcs Ultrasonic Sensor
1pcs ADXL335(GY-61) Module ( with pin header)
1pcs 3V Servo Motor
1pcs MAX7219 Module
1pcs Remote
1pcs 9V 1A Power Supply
1pcs 65 Jumper Wire
1pcs Water Lever Sensor
1pcs USB Cable
1pcs 9V Battery with DC
1pcs RC522 RFID Module
100pcs Resistor (10R/100R/220R/330R/1K/2K/5K1/10K/100K/1M)
20pcs Female-to-male Dupont Wire

Product Features

  • The MEGA2560 complete starter kit with more than 200pcs components.
  • Free PDF tutorial in the CD (more than 35 lessons).
  • LCD1602 module and GY-61 sensor module with pin header ( no need to solder by yourself)
  • Nice package with clear listing and surprise including a nice small box to keep the widget such as LED , IC , buttons , diodes ,etc.
  • We have always cared about the customer experience and improve the product function details.

Click Here If You Need More Detailed Info…

3Doodler Create 3D Pen – The Latest Edition of the World’s First 3D Printing Pen – Ultimate Art Tool & Crafts Pen Kit – With 50 Plastic Strands, No Mess, Non-Toxic (Shocking Pink)

The 3Doodler Create pen set. Welcome to the World’s First and Most Popular 3D Printing Pen. Designed for you to create anything: build, craft, decorate, fix, or make. The possibilities are limited only by your imagination.

Product Features

  • WORLD’S FIRST AND NO. 1 BEST SELLING 3D PEN: 3Doodler Create is the newest model from the maker of the world’s first 3D printing pen. The slimmest, lightest, strongest 3Doodler yet. Enhanced design, easy to manage, and improved drive system for quieter and smoother operation, and endless creation. Latest features also include simplified and intuitive controls, and a new ambient light bar.
  • DOODLE IN 3D: Draw vertically. Draw horizontally. Lift your imagination off the page! The 3Doodler Create extrudes heated plastic, which instantly hardens, allowing you to literally draw in 3D, freehand or on paper. Change colors quickly and easily. The possibilities are endless.
  • 3D ART MADE EASY FOR ALL ADULTS: From hobbyists to crafters, artists and professionals, 3D creation has never been easier. It’s the perfect gift for all men and women. Precision crafting and art is easier than ever with the ultimate 3D craft pen.
  • MOST VERSATILE 3D PEN: 3Doodler offers the widest range of plastics, no mess, safe and non-toxic. It’s the only 3D Art tool with changeable nozzles and unique accessories. Plus, you’ll find hundreds of FREE 3Doodler stencils available online for family friendly inspiration. Draw in 3D for hours!
  • NO RISK PURCHASE, COMPLETE 3D SET: 360 days FREE replacement policy and unrivaled 24-hour global customer service. THE BOX INCLUDES: 3Doodler Create 3D Pen, 50 FREE Plastic Strands in a selection of multiple colors and materials, Power Adapter, Quick Start Guide, Tools & a ton of creative potential!

Detailed Information available on our Homepage…

[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2016 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here For More Information

Monoprice Maker Select Ultimate 3D Printer

Monoprice Maker Ultimate 3D Printer

The Ultimate 3D Printer is capable of professional quality 3D printing with a fine layer resolution as low as 20 microns (0.02 mm). The rigid all-metal frame design results in a stable print platform, which allows for print speeds up to 150 mm/sec. The printer has a heated build plate and can therefore print PLA, ABS, PVA, HIPS, and other popular filament types. It can print gcode files from a computer using a USB connection or from an SDTM card. It is compatible with computers running Microsoft Windows®, Macs® running OS X®, and Ubuntu Linux. The low operating noise of less than 49dBA allows it to be used in the home or in a business or office environment.

The Ultimate Professional 3D Building Experience

Ultra High Precision: This 3D printer supports layer resolutions as fine as 20 microns (0.02 mm), allowing you to make high-quality prints with smooth surfaces and ultra-fine details.

Professional Features: The all-metal extruder and heated print bed means that this printer can handle almost any filament type, from the common ABS and PLA plastics, to more exotic materials, such as PVA, HIPS, flexible TPE/TPU, and even metal and wood.

Anti-Jam: The geared, anti-jam feeder is designed to reliably feed filament, so you won’t have a long print job ruined by a failure to feed the extruder with filament.

Successful prints whatever the complexity

The Ultimate 3D Printer is packed with professional features, which allow you to create high quality, complicated models with extremely fine details.

ANTI-JAM FEEDER, Increased Reliability
The geared, anti-jam feeder is designed to reliably feed filament, so you won’t have a long print job ruined by a failure to feed the extruder with filament.

OPTIMIZE AIRFLOW, Greater Consistency
The open frame design improves airflow, ensuring that all parts of your model cool at the

Product Features

  • Ultra High Precision: This 3D printer supports layer resolutions as fine as 20 microns (0.02 mm), allowing you to make high-quality prints with smooth surfaces and ultra-fine details.
  • Professional Features: The all-metal extruder and heated print bed means that this printer can handle almost any filament type, from the common ABS and PLA plastics, to more exotic materials, such as PVA, HIPS, flexible TPE/TPU, and even metal and wood.
  • Anti-Jam: The geared, anti-jam feeder is designed to reliably feed filament, so you won’t have a long print job ruined by a failure to feed the extruder with filament.

Click Here For More Information

Panasonic TY-EW3D2MMK2 Ultimate 3D Starter Kit (Avatar 3D + 2 Rechargeable Glasses)

Includes 2 pair of rechargeable 3D glasses and 1 Blu-ray 3D movie: Avatar 3D

Product Features

  • Get started watching 3D Blu-ray movies with this starter package
  • Includes exclusive Avatar Blu-ray 3D disc
  • Two rechargeable 3D active shutter glasses (each with cases)
  • Glasses are sized for adults and can be worn comfortably over prescription glasses
  • Includes USB charger

Click Here If You Need More Detailed Info…

[Sintron] Ultimate 3D Printer Full Complete Kit for DIY Reprap Prusa i3 + RAMPS 1.4, Mega 2560, MK8 Extruder, MK3 Heatbed, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), This kit include all the parts you need for building Reprap prusa i3 3D printer. this 3D printer has a simple structure, light and portable, beautiful and trendy. Especially suitable for DIY amateur, artistic design, architectural design, education, 3D photo studio, can be used for printing different items like small components model, decoration, etc.

Below is the video about how it works everyday in our office, please click this link : https://www.youtube.com/v/dk9CACwla2s

The printed plastic part are made by these machines.

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. building a 3D printer is not an easy job, so if there’s some one you can ask, you will save a lot of time.

We have pre-installed the 3D printer firmware for you, so even you know nothing about firmware, you can still get it working. error range would be from 0.1~0.5mm (but in order to be more precise, some knowledge about the firmware is recommended)

Package list and Prusa i3 Specifications : please check the main picture for list.

Product Features

  • (2) We use well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. printing speed up to 100mm/s.
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don’t have to spare one computer for your 3D printer use only. RepRap Prusa i3 3D printer with LCD screen, you can adjust the printing parameters via the LCD screen rotary knob, this would reduct your calibration time a lot !
  • (4) We use the latest MK3 Heatbed 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. XYZ axis position accurately, ensures the printing edge more neatly.
  • (5) We have pre-install the 3D printer firmware for you. so even you know nothing about firmware, you can still get it working. We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can. please feel free to send us an email, we will also help you to complete the project !
  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal MK8 extruder. If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes, so I would suggest you to use long distance extruder as below. it takes you only within 1 minute to change the filament. (how long will we change the filament? for normal use, you would change it at least 3~5 times per month. I believe you don’t want to spend hours every time)

Click Here If You Need More Detailed Info…