[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2017 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here If You Need More Detailed Info…

RepRap Champion Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2, V2.1 and Plus 3D printers

This is second revision of Duplicator i3 / Maker Select Y carriage plate.

Y carriage plate compatible with popular Wanhao Duplicator i3. V2, V2.1, Plus and Monoprice Maker Select, V2, V2.1, Plus printers. Please note – plate was designed and manufactured strictly to these printer models, it will not work with standard open source prusa i3 due to difference in Y-rod distances (140mm or 150mm on Wanhao and 170mm on Prusa i3).

Second revision plate has hole pattern that fully matches stock plate, we just added weight saving holes and cutouts to make plate lighter. Material is the same – tempered aluminum alloy 6061-T6. Surface is brushed and anodized clear.

Plate can be used with stock bearings in plastic holders, as well as SC8UU bearings. We will also publish STL file for the bearing holder similar to stock bearing holder.

Wahnao i3 / Maker Select Y carriage plate features:
Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select
Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick.
Has additional provisioning hole for 3 point level adjustment of build surface.
Allows 3 x linear bearing configuration as well as 4 x bearing configuration.
Compatible with various aluminum build plates and heated beds, sold in our store.

Package Contents:
1 x Anodized Aluminum Y Carriage Plate for Monoprice Maker Select or Wanhao Duplicator i3

Product Features

  • Compatible with Maker Select, Wanhao Duplicator i3 versions V1, V2, V2.1 and Plus
  • Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2.1 and Plus
  • Very stiff, made of tempered aluminum alloy, brushed and anodized clear, no more issues with leveling
  • Y rod distance supported – from 140mm to 150mm

Detailed Information available on our Homepage…

RepRap Champion Anet A8 A6 3D Printer Upgrade Y Carriage Anodized Aluminum Plate

This is new product designed by RepRap Chanpion to upgrade existing Y carriage plates on pupular Anet A6 and A8 3D Printers. Plate is made of tempered aluminum alloy, brushed and anodized for perfect flatness and pleasing surface finish. This product will fix leveing issues that you might have on your Anet A6/ A8 3D Printers due to twist on original Y carriage plate.

Package contents:

1 x Y Carriage Anodized Aluminum Plate

Product Features

  • Drop-in replacement for Anet A8 and A6 stock Y carriage plate
  • Completely flat Y carriage and very stiff plate, eliminates leveling issues
  • Made of strong temepered aluminum, brushed and anodized
  • STL files for belt holders are here www.thingiverse.com/thing:2325206

Detailed Information available on our Homepage…

3D Printer Heated Bed Power Expansion Module Upgrade For High DC Load

Specifications:
Color: Black
Max Current: 25A(Enhance heat dissipation)
Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22″
Weight: 40g(approx.)

Package Included:
1*Heat bed Power Module(motherboard is not included)

Note:
1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
2. Item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working

Product Features

  • Good quality and well design
  • It can be used in both Chitu motherboard,and other open 3D Printer motherboards
  • It will help your 3D printer board equipped with the Chitu controller becomes more powerful
  • Completely solve the hot bed power is too large and the load current issue
  • More practical

Visit The Website For More Information…

Witbot MK10 M7 0.4mm Extruder Upgrade Stainless Steel Wear Resistant Nozzle for Makerbot RepRap 3D Printer (Pack of 5pcs)

Specifications:
Bore Diameter: 0.4mm
Size: 13mm * 9mm
Net Weight: 4g/pcs
Material: Stainless Steel

Package Included:
5*MK10 Stainless Steel Nozzle

Product Features

  • 100% brand new and high quality
  • This product is dedicated on MK10 Extruders
  • The nozzle material use the national standard copper
  • Compare with the non-national standard copper, it have obvious differences,our nozzle’s thermal conductive performance is better than the non-national standard copper
  • Hard coating improves service life and reduces down time

Click Here For More Information

Stocks: The 3D Systems Corp. (DDD) Upgrade to “Buy” at the Gabelli

3D Systems Corp. (NYSE:DDD) was upgraded by equities researchers at Gabelli from a “hold” rating to a “buy” rating in a report issued on Friday. The firm currently has a $21.00 price target on the 3D printing company’s stock. Gabelli’s price objective suggests a potential upside of 68.67% from the stock’s current price.

Several other brokerages have also recently commented on DDD. Vetr cut shares of 3D Systems Corp. from a “sell” rating to a “strong sell” rating and set a $13.10 price objective for the company. in a research note on Monday, July 18th. Bank of America Corp. set a $25.00 price objective on shares of 3D Systems Corp. and gave the company a “buy” rating in a research note on Tuesday, September 13th. Piper Jaffray Cos. cut shares of 3D Systems Corp. from a “neutral” rating to an “underweight” rating and reduced their price objective for the company from $12.00 to $10.50 in a research note on Monday, July 18th. JPMorgan Chase & Co. reaffirmed a “sell” rating on shares of 3D Systems Corp. in a research note on Wednesday, July 20th. Finally, Canaccord Genuity reaffirmed a “hold” rating and set a $14.00 price objective on shares of 3D Systems Corp. in a research note on Tuesday, September 13th. Four investment analysts have rated the stock with a sell rating, ten have given a hold rating, three have assigned a buy rating and one has issued a strong buy rating to the company’s stock. The company presently has an average rating of “Hold” and a consensus target price of $15.61.

3D Systems Corp. (NYSE:DDD) traded down 7.64% on Friday, reaching $12.45. 6,762,800 shares of the company’s stock traded hands. The company’s 50 day moving average is $15.58 and its 200-day moving average is $14.64. 3D Systems Corp. has a 52-week low of $6.00 and a 52-week high of $19.76. The stock’s market cap is $1.40 billion.

11/05/3d-systems-corp-ddd-lifted-to-buy-at-gabelli.html

3D Systems Corp. (NYSE:DDD) last posted its quarterly earnings results on Thursday, November 3rd. The 3D printing company reported $0.14 earnings per share (EPS) for the quarter, beating the consensus estimate of $0.09 by $0.05. 3D Systems Corp. had a negative net margin of 98.40% and a positive return on equity of 4.14%. The company had revenue of $156.36 million for the quarter, compared to analyst estimates of $160.16 million. During the same quarter in the previous year, the firm posted $0.01 earnings per share. The company’s quarterly revenue was up 3.2% compared to the same quarter last year. Equities analysts expect that 3D Systems Corp. will post $0.40 EPS for the current year.

A number of large investors have recently bought and sold shares of the stock. JPMorgan Chase & Co. raised its stake in 3D Systems Corp. by 4.1% in the third quarter. JPMorgan Chase & Co. now owns 97,895 shares of the 3D printing company’s stock worth $1,758,000 after buying an additional 3,883 shares in the last quarter. UBS Asset Management Americas Inc. raised its stake in 3D Systems Corp. by 8.1% in the third quarter. UBS Asset Management Americas Inc. now owns 69,528 shares of the 3D printing company’s stock worth $1,248,000 after buying an additional 5,200 shares in the last quarter. CIBC World Markets Inc. purchased a new stake in 3D Systems Corp. during the third quarter worth approximately $3,504,000. State Treasurer State of Michigan raised its stake in 3D Systems Corp. by 0.5% in the third quarter. State Treasurer State of Michigan now owns 42,900 shares of the 3D printing company’s stock worth $770,000 after buying an additional 200 shares in the last quarter. Finally, Aperio Group LLC raised its stake in 3D Systems Corp. by 14.3% in the third quarter. Aperio Group LLC now owns 21,687 shares of the 3D printing company’s stock worth $389,000 after buying an additional 2,721 shares in the last quarter. Institutional investors own 50.12% of the company’s stock.

3D Systems Corp. Company Profile

Stocks: 3D Systems Corp. (DDD) Stock Rating Upgrade by the Vetr Inc.

3D Systems Corp. (NYSE:DDD) was upgraded by investment analysts at Vetr from a “buy” rating to a “strong-buy” rating in a note issued to investors on Wednesday. The brokerage currently has a $16.47 target price on the 3D printing company’s stock. Vetr‘s price target indicates a potential upside of 15.99% from the stock’s current price.

Several other equities research analysts have also weighed in on DDD. Jefferies Group reaffirmed a “hold” rating and issued a $15.00 target price on shares of 3D Systems Corp. in a research report on Tuesday, September 13th. Pacific Crest reaffirmed a “hold” rating on shares of 3D Systems Corp. in a research report on Tuesday, September 13th. Canaccord Genuity reaffirmed a “hold” rating and issued a $14.00 target price on shares of 3D Systems Corp. in a research report on Tuesday, September 13th. Bank of America Corp. set a $25.00 target price on 3D Systems Corp. and gave the stock a “buy” rating in a research report on Tuesday, September 13th. Finally, Needham & Company LLC reissued a “hold” rating on shares of 3D Systems Corp. in a report on Tuesday, September 13th. Four equities research analysts have rated the stock with a sell rating, nine have assigned a hold rating, three have given a buy rating and one has given a strong buy rating to the company’s stock. The company presently has an average rating of “Hold” and an average price target of $16.04.

Shares of 3D Systems Corp. (NYSE:DDD) opened at 14.20 on Wednesday. The company has a 50 day moving average of $14.45 and a 200 day moving average of $14.64. 3D Systems Corp. has a 52-week low of $6.00 and a 52-week high of $19.76. The stock’s market capitalization is $1.60 billion.

3D Systems Corp. (NYSE:DDD) last issued its earnings results on Thursday, November 3rd. The 3D printing company reported $0.14 earnings per share for the quarter, topping the Thomson Reuters’ consensus estimate of $0.09 by $0.05. 3D Systems Corp. had a positive return on equity of 4.14% and a negative net margin of 98.40%. The firm had revenue of $156.36 million for the quarter, compared to analyst estimates of $160.16 million. During the same period last year, the company earned $0.01 earnings per share. The firm’s revenue for the quarter was up 3.2% on a year-over-year basis. Analysts predict that 3D Systems Corp. will post $0.43 EPS for the current fiscal year.

Large investors have recently made changes to their positions in the company. State of Wisconsin Investment Board raised its stake in shares of 3D Systems Corp. by 22.2% in the third quarter. State of Wisconsin Investment Board now owns 165,000 shares of the 3D printing company’s stock worth $2,962,000 after buying an additional 30,000 shares during the last quarter. Emerald Acquisition Ltd. purchased a new stake in 3D Systems Corp. during the second quarter worth $543,000. Cortina Asset Management LLC increased its stake in 3D Systems Corp. by 82.6% in the second quarter. Cortina Asset Management LLC now owns 114,274 shares of the 3D printing company’s stock worth $1,564,000 after buying an additional 51,685 shares during the period. Nationwide Fund Advisors increased its stake in 3D Systems Corp. by 42.8% in the second quarter. Nationwide Fund Advisors now owns 250,691 shares of the 3D printing company’s stock worth $3,432,000 after buying an additional 75,163 shares during the period. Finally, Teacher Retirement System of Texas increased its stake in 3D Systems Corp. by 13.9% in the second quarter. Teacher Retirement System of Texas now owns 14,771 shares of the 3D printing company’s stock worth $202,000 after buying an additional 1,805 shares during the period. Hedge funds and other institutional investors own 48.62% of the company’s stock.

About 3D Systems Corp.

3D Systems Corporation is a holding company. The Company provides three-dimensional (3D) products and services, including 3D printers, print materials, parts services and digital design and manufacturing tools. Its ecosystem supports applications from the product design shop to the factory floor to the operating room.