Zorvo 3D Printer J-head V6 Hotend Extruder Nozzle-0.4mm filament-1.75mm , With 12V fan and 1 m PTFE tube

●With PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.

NTC 3950 Thermistor parameters:
►Thermistor temperature value table for Marlin
►Small Size: 1.25mmx2.0mm glass bead
►High accuracy: 1%
►Resistance value at 25°C=100K
►Wiring insulation: high temperature teflon/PTFE
►Wiring length: 1 meter

►Type: Bowden E3D V6 J-head
►Thermister: 100K NTC

Package include:
►1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
►1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
►1 x One Meter long Bowden tubing 4mm OD 2mm ID
►1 x PC4-M6 Straight Fitting

It usually takes 5-14 days to arrive to US by FBM

It usually takes 5-14 days to arrive to US by FBM

Product Features

  • Type: Bowden V6 J-head, Wiring length: 1 meter
  • Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
  • Included: NTC3950 thermistors and 12V 40W heater,High Temperature Peformance.
  • This hotend is equipped with stainless metal heatbreak and with PTFE liner inside heatbreak to reduce extruder jamming.
  • 30 DAY MONEY BACK GUARANTEE- All Torege customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfactory for any reason. You have no risk to try.

Click Here For More Information

Published by


3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “Zorvo 3D Printer J-head V6 Hotend Extruder Nozzle-0.4mm filament-1.75mm , With 12V fan and 1 m PTFE tube”

  1. bought this as a spare (using it, now) for my creality cr7 (aka ‘yks’ on amazon). a thingiverse mount worked fine and while this is a ‘cheap clone’, it seems to work as well as the special oem one (that seems to have no replacement you could buy).the fan is not great and there are shrouds you can make that will fit the more common 40mm fan.mine came same-day, it was all assembled and its been working with PLA for a week or so, now. I’ve been tempted to try a real e3d…

  2. Recently I modded my Anet A8 to a bowden drive system. Rather than spend the money to get an actual E3D v6, I purchased this instead. I am very pleased with the results I’ve gotten so far. This hotend preforms well. It heats well, and maintains a fairly constant temperature without insulation. The only problem i’ve had so far with this hotend is that for whatever reason when it heats, I get a funky hot plastic smell. It smells nothing like PLA, more like nylon. I’ve tried to locate the source…

Leave a Reply