HATCHBOX 1.75mm Green PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm

Welcome to Hatchbox 3D Printer Filament

Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.
The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Won’t the print stick to the build platform?
A: First, review FAQ #1. Second, for PLA it’s recommended to use blue painters tape and ABS it’s recommended to use kapton tape. If printing with ABS and the print will still not stick to the build platform you can use “*ABS Sludge” a little goes a long way. You can use this on the build platform on top of kapton tape.

*When creating the ABS sludge (mixture of acetone and ABS scraps), create the mixture in well ventilated area preferably outside. Using this sludge will make the print stick to the build platform really well and may be difficult to remove the print, use at your own discretion and a plastic scraper will come in handy.

Product Features

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…

Published by

3DReality

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

3 thoughts on “HATCHBOX 1.75mm Green PLA 3D Printer Filament – 1kg Spool (2.2 lbs) – Dimensional Accuracy +/- 0.05mm”

  1. Great budget filament! I want to begin by saying that for the cost, this simply can not be beat! If you are someone that does not need top of the line filament or you are someone trying to save some cash, then this filament is exactly what you are looking for.Currently I use a Makerbot Replicator 2X for all my printing, and so this review is based on my experience with this filament and that machine. I have tried a large variety of different filaments, from the rubbers to wood to abs/pla and the like…

  2. Produces great prints on my Tinkerines Ditto+ This PLA produces very nice prints and for the price, you simply can’t beat it. I had been using a spool of clear PLA filament that was provided with my 3D printer and had a lot of difficulty getting nice, consistent results. After much tinkering and calibration, with not much improvement in print quality, I decided I’d give this PLA a try. The HatchBox PLA was a tremendous improvement! The prints come out with fine details captured and the prints stick to the bed nicely (a major issue I…

Leave a Reply