1 Roll 5″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (120MM x 55M 4.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important:

Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2017 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here If You Need More Detailed Info…

1 Roll 6″ inch WIDE 3D Printing Made In USA PRO Grade Blue Painters Tape Masking Clean Release Easy Removal NO RESIDUE (144MM x 55M 5.7 inch). 3D Printer bed grip deck cover 3D Prints Removal 60 Yd

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important:

Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

UltiCast 3D printer add-on allows users to easy cast silicone for soft robotics

Nov 10, 2016 | By Tess

One of the most exciting things on the 3D printing horizon is printing in silicone, a rubbery and extremely versatile polymer which has wide applications in virtually all industries. Many 3D printing and materials companies have been making headway within the field of 3D printing silicone, such as German companies WACKER and Keyence, for instance, though there is still much left to be accomplished, especially in the desktop 3D printing community.

That is why we were very excited to hear about an innovative new project realized by a team of students from the Delft University of Technology in The Netherlands, who have developed a 3D printer add-on that allows for silicone to be cast into a 3D printed shell during the printing process. While the new technology is not “3D printing silicone” per se, it is a promising inroad into more accessible and customizable silicone casting.

The new method, which was presented at the Advanced Prototyping science fair of the university’s faculty of Industrial Design Engineering, is called UltiCast and essentially combines 3D printing with more traditional molding and casting techniques which are standard for silicone. In other words, the machine works by simultaneously 3D printing a plastic shell or mold and filling said shell with a two-component silicone mix.

The students have even created a specialized code which automatically slices the 3D printed mold and determines exactly how much silicone mix must be used to fill it. If you’re wondering how to remove the silicone from the shell, the team has used PVA to 3D print the shells, a material which can easily be dissolved in water.

To develop the UltiCast technology, the team of students used an Ultimaker 3D printer, which they hacked and rebuilt almost entirely. With their modified device, they have proven that they can create complex molds for silicone—not entirely new itself—but can also cast the silicone at the same time.

As the team suggests, their new method could have useful applications in the field of soft robotics, as it could allow for the quick and cheap manufacturing of soft actuators. As Rob Scharff, an UltiCast team member and soft robotics PhD candidate, explains, “You get a lot of freedom to personalize the behavior of robots with geometry and materials.” This includes making flexible robot limbs, and custom-designed grippers, which could allow for more versatile robotic movements. Using UltiCast it is even possible to 3D print a harder material inside the silicone, which could allow for even more complex parts and materials.

The new technology could also prove to be useful within the medical sector, where soft robotics have a role to play. More specifically, UltiCast could be a useful tool in the creation of movement aids, such as 3D printed gloves with soft robotic actuators which could help those suffering from debilitating conditions such as local paralysis, arthritis, or injuries. “Reducing the cost of treatment and support utilities is a goal that inspires us all. Soft robotics could, in the long term, be a big player in the progress,” the team commented.

Impressively, the UltiCast 3D printer add-on was developed on the cheap, as the current iteration of it was made for only about €3000. For what is essentially a rudimentary multi-material 3D printing system, that is a price to write home about. For now, however, UltiCast is more a proof of concept than anything, and is still far from being a commercially viable product. In fact, it is not clear whether the students will even pursue the development of the novel system.

Whether they do or not, UltiCast is still an interesting experiment within the field of multi-material 3D printing and soft robotics. As the student team has shown, 3D printing limits can easily be broken down, and innovation is never far away.

[embedded content]

Posted in 3D Printer Accessories

Maybe you also like:

HICTOP MINI Desktop 3D Printer Prusa I3 Easy Setup Acrylic Covers, 0.10-mm Maximum Resolution, 1.75-mm PLA, Wood (Black)

Brand: HICTOP
Structure: Acrylic 
Board: mega2560 ramps 1.4 with 4 A4982 stepstick
Extruder quantity: 1 
Printing size: 3.15″ x 3.15″ x 3.15″ (80 x 80 x 80mm) 
Layer thickness: 0.1-0.4mm 
SD-card: Support 
LCD screen: Yes 
Printing speed: 30-90mm/s 
Standard extruder diameter: 0.4mm 
Extruder temperature: 210 Celsius
XY axis positioning accuracy: 0.011mm 
Z axis positioning accuracy: 0.004mm 
Printing material support: PLA, Wood 
Printing material diameter: 1.75mm 
Recommended material: PLA 
Software language: Chinese/English 
Date import format: STL, G-Code ,OBJ
Device dimension: 7.28″ x 9.06″ x 10.2″ (185 x 230 x 260mm) 
Device weight: 6.16 Ibs 
Packing dimension: 13.4″ x 13.4″ x 6.7″ (340 x 340 x 170mm) 
Packing weight: 8.8 Ibs 
Power supply: 12V 
Operating system: XP/WIN7/MacOS 
Printing software: Cura/Repetier-Host
Working condition Temp: 10-30 Celsius Humidity:20-50% 

Note: The package only include all the parts for the 3D printer, not the assembled machine. 100g test print included in the kit, not the whole spool!

Product Features

  • It has a lightweight design (6.16 lbs); classic design fits for regular computer desk.
  • Print layers up to a maximum resolution of 100 microns (0.1mm); builds objects to maximum dimensions of 3.15″ x 3.15″ x 3.15″/80 x 80 x 80 mm
  • Single extruder, easy to build, simple maintenance. The best price-to-performance ratio in the professional 3D printer category.
  • The design aims as an entry-level machine for student and newbie to learn 3D modeling technology and train for creative thinking.
  • HICTOP MINI Desktop 3D Printer is an open design 3D printer, uses acrylic plane as the main material

Click Here For More Information

[Sintron] NEW Ultimate 3D Printer Full Complete Kit TW-101 2016 Upgrade Pro & Easy 3D Printer Reprap Prusa i3 + MK8 Extruder, Stepper Motor and LCD Controller

The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), this 3D printer has a simple structure, light and portable, beautiful and trendy.

Sintoron TW-101 3D Printer Assembly Guide Video, please click this link : https://www.youtube.com/watch?v=Cjv6HPep_dU

TW-101 has complete pdf instruction as well as Exploded view video–> hardware parts
TW-101 has open source preconfigured Marlin configuration –> firmware part
We also provide software for TW-101: such as Pronterface, Slic3r. and most importantly, we can provide the configuration file of slic3r, which we spent so much time to set it up. with this, your printing would be beautiful! –> software part

Quick & Easy assembling, all you need are just one wrench + screw driver. and they are included! we have classified the parts, screws, nuts for you. this would save you lots of time!

Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.

Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. if there’s some one you can ask, you will save a lot of time.

Package list and TW101 Specifications : please check the main picture for list.

Product Features

  • (1) We don’t adapt wade extruder, we upgrade the J-head to all metal Sintron MK8 extruder (not all the MK8 extruders are the same). If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes. it takes you only within 1 minute to change the filament. Sintron MK8 extruder’s special design also ensure you a pleasant & smoth printing.
  • (2) We use SINTRON well-designed standard MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, we have made necessary design to prevent “jammed” problem. Exclusive Anti-Backlash design for Z axis , this makes the movement very quiet and stable. only Sintron got this design in the Market now! Sintron TW-101 uses 304 stainless T8 Lead Screw with Thread pitch 2mm. this makes TW-101 more accurate in printing.
  • (3) Wiring has never been as easier as TW-101. you are not a expert of electronics? Never Mind! we have mistake-proof plugs. this is also one of our special design. as long as you can read and check the color, you can do it! Further more, we have made wires with corresponding suitable length for each plug(others don’t). so it would look tight and clean! no extra mess.
  • (4) Energy Saver! TW-101 consumes only 1/3 energy of ordinary 3d printer, TW-101 adapts special tape. so you don’t need to heat the bed, therefore no worries about fire accident. but on the other hand, TW-101 by default won’t suit for ABS(toxic) printing, PLA(non-toxic) and others are preferred. it’s also a trend to use only PLA as it’s enviormental friendly and no harm for human body.
  • (5) Sintron TW-101 provide good Full tech support for the machine, unlike other sellers, just sell and know nothing about the product. we provide support for hardware, firmware & software if you would like to discuss with us! this would make sure you learn a lot from it too!

Click Here For More Information

Aimike 3D Printing Pen 0.7mm Nozzle Printer Head Part Replacement Integrated Inserted Design Easy Install Work for 1.75mm ABS/PLA (Black)

Descriptions :
Used for 1.75mm ABS & PLA filament
Heating temperature: 70-80℃
Nozzle Diameter: Approx. 0.7 mm / 0.28 “
Nozzle Total Length: Approx 1.5cm
Material :non-metal aerial material
Color : Black

Package Includes :
1 x Nozzle for 3D Printer Pen

Note : Please check your original 3D Printer Pen Nozzle before placing the order. Please be sure the specifications above and its appearance are the same. Then it will meet your needs.

Product Features

  • Integrated inserted design make this nozzle easier to be replaced. You could just press the buckle lightly and the nozzle will be disassembled.
  • If the nozzle is jammed, you could remove and clean it at any time with easy access.
  • The temperature of the nozzle could reach no more than 70-80℃, which could prevent you from scald in accident.
  • Safety design with non-metal aerial material makes you feel relieved during your printing time.
  • The nozzle of 3D printing pen belongs to perishable items, choose from reliable supplier

Visit The Website For More Information…