- Material: 304 Stainless steel
100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick – will not break when you remove your print from it.
Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and thicker than typical 3mm plates sold for use with MK2 heated beds.
Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. Please make sure your 3D printer will accept this size before making purchase.
Please take a look at the supplied drawing for dimensions and details.
Glass plate features:
Dimensions: 219x219mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lame glass green tint).
Cut corners to clear with mounting screws.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heater board.
1 x Borosilicate Glass Print Surface 219x219mm x 4mm thick.
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly, it will demage the nozzle or lead to clogging;
* Clean the platform surface with alcohol/water.
Temperature settings for different filaments:
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃
Usage of Ultrabase Heatbed Kits:
Please kindly visit :
Official Web: www.anycubic3d.com
Youtube Channel: www.youtube.com/watch?v=zDup0gp9pLA
Material: Tempered glass/Inorganic coating/Aluminum
Max Temperature:120 Degree Celsius
Resistance around 0.9 ohm for 12V
Resistance around 3.6 ohm for 24V
Item size: Tempered Glass 220x220x4mm ;Aluminum Heatbed 220x220x1.5mm
Package Weight :870g
1x ANYCUBIC Ultrabase 3D Printer Platform with Heatbed
4x M3X35 Screws
4x M3 nuts
BIBO2 touch laser is the most featured printer. Now order the BIBO2 touch laser, we will send you the WIFI module (USD20, pre-installed) and laser engraving module (USD22) as the gifts. It is, of course, a 3D printer. But it’s also a laser engraver, too, permitting the ability to engrave on wood or even cut paper and cardboard. Not every 3D printer has such an extra feature, and those that do often cost far more than this machine.
1=3? Yes, 1 × BIBO2 touch laser =1 × laser engraving machine+2 × 3D printers(copy printing can print two same objects at the same time)
Extruder Number: 2
Frame: 6mm thick aluminum composite panel
Full-color Touch Screen: Yes
Laser Engraving: Yes
WIFI Control: Yes
Copy Printing: Yes
Continue Printing After Power Cut: Yes
Filament Run-out Detection: Yes
Removable Heated Bed: Yes (already leveled, no need to level it again)
Number of Fan to Cool Plastic extruded: 2
Power Input: AC100-240V 50-60HZ
Printing Mode:USB connect PC or SD card or U disk
Weight: 35.3 pounds
Build Size :8.4*7.3*6.3(in) / 214*186*160（mm）
Positional Accuracy: X,Y axis：0.011mm Z axis：0.0025mm
Printing Layer Resolution: 0.05-0.3mm
Max. Axis Moving Speed: 350mm/s
Max. Nozzle Temp.:270℃
Software for PC: Repetier-Host, Cura, Simplify3D,Makerware
Compatibility: Windows, Mac, Linux
Filament Type:ABS, PLA, Dissolvable filament (PVA, HIPS), Flexible filament (TPU)
Filament Diameter 1.75mm
SHOPPING NOW! You can get these gifts:
1 x laser engraving module
1 x WIFI module (pre-installed)
1 x acrylic cover kit
2.2 LBS (1.0KG)PLA filament
1 x SD card
1 x glass bed
1 x glue stick
1 x USB cable
Borosilicate glass provides a stable print base for even low diameter printouts, and due to its extreme heat resistance is perfect for heated beds when printing tricky filaments!
Our adhesive surface provides extreme grip, and is great for warp free printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments!
Both surfaces are premium quality, durable printing bases and will transform your 3D printing experience.
Adhesive Print Surface
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F
Size: 7.8″ x 8.3″ x 0.1″
Maximum Temperature: 550℃/1022°F
Speed up your reprap heated bed assembly – get all necessary parts in one kit. You will need 2-4 paper binder clips to hold glass in place, best source for these clips – ebay.com or your local office supply store.
MK2B Heated Bed Specs:
Dimensions: 214mm x 214mm
Hole Spacing: 209mm
Laminate FR4 1.6mm
2 Layer, 35µm Copper
Red Soldermask – Both Side
White Silkscreen – Both Side
Power Input: 12V/24V DC
Copper Plated Holes
Borosilicate Glass Specs:
Dimensions: 213mm x 200mm
NTC 3950 Thermistor Specs:
Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter.
1 x MK2B PCB Heated Bed
1 x Borosilicate Glass Print Surface 200x213mm
1 x NTC 3950 Wired Thermistor (wiring is 1 meter long)
1 x Power wiring (2 wires, 1 meter long each)
4 x M3x05 x 25 Stainless socket head screws
4 x M3x05 Steel Locknuts
8 x M3x9 Steel Washers
1 x Silicone Rubber Spacer, about 50mm long.