Ambienceo Multi-functional 3D Vacuum Heat Transfer Press Sublimation Printer Machine for Phone Cover T-shirt Mug Plate Red 

Features:
Warranty:come with 2 years of warranty
Accurate digital temperature and time control
Sealing silicone: prevent air from entering
High-density foam packaging: shock protection, double protection
Innovative technology: cover all the functions of heat press machine
Unique furnace design: concave-convex dot surface design enlarges heating area greatly
Overheat protection: more than 250 ℃ automatically power off, less than 210 ℃ automatically power on
Superior safety performance: the machine will power off automatically if there is no operation in 15 minutes
Dual temperature control design: when one side of the temperature control system fails to work, the other side will work automatically

Specifications: 
Power: 2800W 
Voltage: 110V/60Hz
Vacuum Pump: 150w
Upper heating plate: 1300W
Bottom heating plate: 1300W
Max Vacuum: -640mmHg
Vacuum Flow: 33L/min
Volume:0.15m³
Printing Size: 11.8″ x 16.53″ x 4.33″
Product size:23.6″ x 18.5″ x 12.2″
Packing Size:27.5″ x 24.8″ x 16.1″ 
Weight: 52.9lb

Package includes:
1 x 3D sublimation machine
1 x teaching CD
1 x power cable
1 x english manual
1 x gloves
1 x silicone pads
3 x coasters
2 x sealing high temperature hose

Product Features

  • Environmentally friendly:it can filter toxic gas with an activated carbon filter
  • Large capacity:it can print 12 mugs at one time,save your time and enhance your working efficiency greatly
  • Easy operation:just place the printing items between the vacuum film and the platen, then turn on the buttons and go
  • Perfect printing effect:vacuum heating space makes the heating even and asperities dots design to enlarge the heating area
  • Multifunction:it can print both flat items and curved items such as T-shirts, pillowcases, mugs, plates, metal sheets, ceramic tiles, cell phone protection covers, etc

Detailed Information available on our Homepage…

YXQ 8x120mm Cylinder 110V Cartridge Heater with String for 3D Printer Build Plate 500W 3 Pcs

Package content:3 x Cartridge Heater

Product Features

  • Cartridge heater can be inserted into drilled hole or liquid to heat the whole part.
  • Max Insertion Deep: 120mm; Drilled Hole Minimum Diameter: 8mm
  • 2 Wires Condition: 1 for hot side, 1 for nuetral.
  • This cartridge mostly used for 3D printer build plate heating, easy using,
  • Notice: The heater will be harder removed if the drilled hole smaller to 5mm diameter.

Detailed Information available on our Homepage…

Anycubic Ultrabase 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa i3 220x220mm

Note:
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly, it will demage the nozzle or lead to clogging;
* Clean the platform surface with alcohol/water.

Temperature settings for different filaments:
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃

Usage of Ultrabase Heatbed Kits:
Please kindly visit :
Official Web: www.anycubic3d.com
Youtube Channel: www.youtube.com/watch?v=zDup0gp9pLA

Specification:
Material: Tempered glass/Inorganic coating/Aluminum
Heatbed Power:140-145w
Voltage:12V/24V
Max Temperature:120 Degree Celsius 
Resistance around 0.9 ohm for 12V 
Resistance around 3.6 ohm for 24V
Item size: Tempered Glass 220x220x4mm ;Aluminum Heatbed 220x220x1.5mm
Thickness:approx. 5.5mm
Item weight:750g
Package Weight :870g

Package List:
1x ANYCUBIC Ultrabase 3D Printer Platform with Heatbed
4x M3X35 Screws
4x M3 nuts
4x Spacers

Product Features

  • Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
  • Good Flatness: Ultrabase is glass-based and the critical tolerance is ±0.2mm. (normally within the 0.1mm range).
  • High Durability: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃.
  • Easy to clean: Ultrabase is easy to clean by alcohol/water.
  • Compatibility: Ultrabase is compatible with most Cartesian style 3D printers (Build surface size :220x220mm)

Click Here For More Information

RepRap Champion Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2, V2.1 and Plus 3D printers

This is second revision of Duplicator i3 / Maker Select Y carriage plate.

Y carriage plate compatible with popular Wanhao Duplicator i3. V2, V2.1, Plus and Monoprice Maker Select, V2, V2.1, Plus printers. Please note – plate was designed and manufactured strictly to these printer models, it will not work with standard open source prusa i3 due to difference in Y-rod distances (140mm or 150mm on Wanhao and 170mm on Prusa i3).

Second revision plate has hole pattern that fully matches stock plate, we just added weight saving holes and cutouts to make plate lighter. Material is the same – tempered aluminum alloy 6061-T6. Surface is brushed and anodized clear.

Plate can be used with stock bearings in plastic holders, as well as SC8UU bearings. We will also publish STL file for the bearing holder similar to stock bearing holder.

Wahnao i3 / Maker Select Y carriage plate features:
Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select
Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick.
Has additional provisioning hole for 3 point level adjustment of build surface.
Allows 3 x linear bearing configuration as well as 4 x bearing configuration.
Compatible with various aluminum build plates and heated beds, sold in our store.

Package Contents:
1 x Anodized Aluminum Y Carriage Plate for Monoprice Maker Select or Wanhao Duplicator i3

Product Features

  • Compatible with Maker Select, Wanhao Duplicator i3 versions V1, V2, V2.1 and Plus
  • Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2.1 and Plus
  • Very stiff, made of tempered aluminum alloy, brushed and anodized clear, no more issues with leveling
  • Y rod distance supported – from 140mm to 150mm

Detailed Information available on our Homepage…

RepRap Champion Anet A8 A6 3D Printer Upgrade Y Carriage Anodized Aluminum Plate

This is new product designed by RepRap Chanpion to upgrade existing Y carriage plates on pupular Anet A6 and A8 3D Printers. Plate is made of tempered aluminum alloy, brushed and anodized for perfect flatness and pleasing surface finish. This product will fix leveing issues that you might have on your Anet A6/ A8 3D Printers due to twist on original Y carriage plate.

Package contents:

1 x Y Carriage Anodized Aluminum Plate

Product Features

  • Drop-in replacement for Anet A8 and A6 stock Y carriage plate
  • Completely flat Y carriage and very stiff plate, eliminates leveling issues
  • Made of strong temepered aluminum, brushed and anodized
  • STL files for belt holders are here www.thingiverse.com/thing:2325206

Detailed Information available on our Homepage…

HICTOP Ender 3D Printer DIY Kit with Heated Build Plate, Includes Micro SD card Printing size 5.9×5.9×7.8 inches

Specifications

Net weight: 4.2KG
Loading weight: 5.5kg
Printing size: 150×150×200mm
Machine size: 300*330*540mm
Packing size: 445*400*115mm
Filament: PLA/ABS/Soft rubber/wood Etc.
Filament diameter: 1.75mm
Nozzle diameter: default 0.4mm, support 0.3 / 0.2mm
Speed: 100mm/s
Accuracy: ±0.1mm
Working mode: Online or SD offline
Printing thickness: 0.1-0.4 adjustable
Voltage: 12V
Rated power: 120W
Actual power: 100W
Power requirement: 110-240V input: 12V output
File Format: STL,OBJ, JPG, PNG, Gcode
Operating page: English
Drawing interface: English
Software: Cura,Repetier-Host,simplify3D
Operating system: WIN, XP, MAC, Linux, Vista

Product Features

  • EASY ASSEMBLY: Most 3d printer parts are pre-assembled well before shipping, it will need about 1 hour to build it up.
  • PRINTING SIZE: Prints max size of 150X150X200mm/5.9×5.9×7.8 inches. Very cute for children use
  • EASY WIRING: Wires are already connected to the control board & cables are also attached, easy for wiring.
  • SUPPORT FOR ALL FILAMENT TYPES: It is not only support PLA, but also support ABS, wood, TPU etc. There is a bottle of glue comes with the 3d printer, it is good for ABS filament stick to the hot bed.
  • VALID CUSTOMER SERVICE: Hictop offers life time after sales service, You could contact us at any time for any help.

Click Here If You Need More Detailed Info…

New Arrival Auto Leveling Position Sensor for Anet A8 Prusa i3 3D Printer RepRap Includes Mounting Plate and Screws

3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v ROKO BN-10-30V BK-NPN.NO BU-0V This is an auto level sensor for the Anet A8 or other Prusa i3 Models. Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the original z stop and plug in sensor and screw into the back of printer. You will most likely have to update firmware to make this function. Please be aware we are not responsible for any problems that come from upgrading or flashing new firmware. 3rd Party firmware is not recommended by the manufacturer and should be installed with caution.

Product Features

  • USA Seller | Fast Shipping | No Soldering | Plug and Play
  • 3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v
  • This is an auto level sensor for the Anet A8 or other Prusa i3 Models.
  • Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the original z stop and plug in sensor and screw into the back of printer.

Click Here For More Information