For Arduino Professional 3D printer CNC Kit,Longruner GRBL CNC Shield +UNO R3 Board+RAMPS 1.4 Mechanical Switch Endstop+DRV8825 A4988 GRBL Stepper Motor Driver with heat sink+Nema 17 Stepper Motor

CNC Shield Board: Latest CNC Shield Version 3.0 for arduino. GRBL 0.9 compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13). 2 x End stops for each axis (6 in total). Coolant enable. Compatible with A4988 or DRV8825 stepper driver. Runs on 12-36V DC. DRV8825 Stepper Motor Driver: Stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It’s not arduino official board but it’s compatible with all arduino software and hardware). Nema 17 Stepper motor Specification: Model No.:17HD48002H-22B Step Angle: 1.8 deg Holding Torque: 59Ncm(84 oz.in) Rated Current/phase: 1.7A Frame Size: 41 x 41mm Body Length: 47mm Shaft Diameter: 5mm Shaft Length: 22mm Weight: 380g Mechanical Endstop Connection Description: Red line connect VCC (ramps of +) black wire connect the GND (ramps of -) Green Line connect SIGNAL (ramps in s) Tips: Under normal circumstances, the system must be configured to at least three mechanical switches. Advantage: Easy to install, the more common used styles. Length of Cable: 70 cm Great Package Includes: 1 x CNC Shield Board 1 x Longruner UNO R3 Board 1 x 1.5m USB cable for R3 Board 3 x Nema 17 stepper motor 1.7 A (with bracket and screw) 3 x Nema 17 Stepper Motor Mounting Bracket 3 x Mechanical Switch Endstop 3 x 3Pin 70cm Cable 4 x DRV8825 Stepper Motor Driver 4 x Aluminum heatsink w/ 3M tape backing 12x M3 Screws for bracket of stepper motor

Product Features

  • Latest CH340G CNC Shield expansion board Version 3.0 for Arduino.
  • Longruner UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable.
  • 4pcs DRV8825 Stepper Motor Driver with Heat Sinks.
  • 3pcs NEMA-17 Stepper Motor 84 oz.in (59 Ncm) 47mm Body 1.8 degree with Mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12pcs M3 Screws.
  • 3pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with 3Pin 70cm Cable.

Detailed Information available on our Homepage…

New Improved 3D Pen 2017 For Doodling, Professional 3D Printer In Different Colors, Comes With Refill Filament & USB Compatible Charger (GREEN)

MY3D’s new generation professional V5 3D printer pen – Create your own art with the lightweight and safe 3D pen.
It suits both professional and amateur artists.
Because the discharging speed and drawing speed is adjustable it’s easy to maneuver, which makes it suitable even for children.
It is recommended to children over 8 years.

Specifications:

Weight: 50g
Discharging mode: Hot melt extrusion molding
Heating temperature: Around 200°C
Filament diameter: 1.75mm
Filament types: ABS/PLA filament refills

The device nozzle nib and surrounding area are high temperature area, NEVER TOUCH THIS AREA.

Product Features

  • THE NEW GENERATION V5 has the lightest and best design yet. With this almost noiseless low-weight 3-D pen, you can sculpt unique art. Create, Doodle & Design what you want, it’s only your imagination that stop you.
  • EASY TO HANDLE for a better experience for the kids. You can easily replace filament color and adjust the drawing speed, for the best creative experience
  • SAFE AND NON-TOXIC filament for a risk-free creation. The new design of the pen is made so it will generate lower temperatures around the tip
  • PROFESSIONAL DESIGNED for best and easiest experience when you draw, build and design
  • USB-COMPATIBLE charger that makes you have many more opportunities where you want to draw and design. The charger work in any USB port, such as computer or power bank. That allows you to take the pen and draw anywhere

Detailed Information available on our Homepage…

Creozone 3D Printer Tool 3D Print Removal Tool Steel Spatula, Professional 3D Printer Accessories

This is Creozone special design removal tool for 3D printing.

Product Features

  • Professional 3D print removal tool
  • Wood grain handle and stainless steel knife
  • This 3D print removal tool can help you easy get the prints off from the build surface
  • Will not scratch build surface
  • Net Weight: 2.4 ounce

Detailed Information available on our Homepage…

IC3D Natural 1.75mm Nylon 3D Printer Filament – 2lb Spool – Dimensional Accuracy +/- 0.05mm – Professional Grade 3D Printing Filament – MADE IN USA

IC3D® – For 3D Printers, By 3D Printers (TM) Spend more time printing with high-quality 3D printer filament from IC3D®. IC3D® extrudes 3D printer filament in-house in Ohio, USA. Strict production standards for cleanliness and tolerance specifications ensure the diameter is within +/- 0.10mm and ovality (roundness) is within 4%. Quality is the top priority as each spool is hand checked, vacuum sealed with desiccant, and packaged. IC3D® filament is extensively tested with success on a variety of mainstream desktop 3D printers utilizing various extruder designs and hot-end styles. Every spool of IC3D® filament is backed by a 100% SATISFACTION GUARANTEE.

Product Features

  • 2.1lb of 1.75mm Nylon 3D printer filament | Similar to Taulman Bridge Nylon
  • Filament diameter is 1.75mm +/-0.5mm, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1
  • Printing Temperature range is 245 – 260C | Bed Temperature 40C – 70C
  • Made in the USA under strict quality standards
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A

Check Out Our Website For Details…

3D printer pen,LESHP Professional 3D Pen 3D Printing Pen with LED Display Drawing Printer Pen for Drawing,Doodling,Art and Craft Making,3D Modeling and Education (F20 Blue)

Features:
People can make their imagination become reality with LESHP 4nd 3D pen. The 3D printing pen allows anyone to create objects and solve problems with no complicated design software.Good gift for children and audult.
8 different printing speeds let you draw and write effortlessly on a surface or in the air,you can adjust material flow speed to your individual preference while crafting.
Extra-bright LED display allows you to monitor flow speed and temperature of material.
Simple and light design ensure easier to carry, fits every bag or case and children will not feel the weight when use this 3D printer pen.

Specification:
Recommended temperature for filaments:
ABS:180-210℃
PLA:160-180℃
Support filaments:1.75mm PLA/ABS
Power input: 100-250v 3A
Power output: DC 12V/3A 24W

Package included:
1 x 3D Pen
1 x Power Adapter
1 x Pencil Holder
1 x User Manual
3 x Filaments

Warning Instruction:
DO NOT touch the tip or surrounding area in operation or within a short time after stop using.
When not in use,please unload the filament,unlpug power sacket,put the device in the pen holder,if direct contact,the hot tip of nozzle will damage the painted surfaces,plastic,clothes and etc.
The device is suitable for children over 8 years old and adults,children must be accompanied and monitored by adult when using the pen.
DO NOT use the pen near bathtubes,showers,basins or other places wet with water.

Product Features

  • Great Tool: 3D Printing Pen helps children improve spatial thinking ability,and create or build 3D masterpieces,make kids’ world much more colorful. Great tools for teaching and learning.Suitable for kids and adults.
  • PLA/ABS Filament Mode: The 4nd 3D drawing pen is suitable for both 1.75mm ABS & PLA Filament.Kit includes 3 pack of PLA/ABS plastic filament.
  • 8 Different Printing Speeds: 8 different adjustable feeds let you regulate speed & flow for optimal control of material while you’re drawing with our 3D printing pen.You can choose the most suitable speed.
  • Easy to Use: Just insert the filaments to the hole at the top of the pen,and pull the button,the pen will auto absorb the wires.Suits children and adults.
  • Lightweight: The 4nd 3D pen is more lightweight than the old generation,simple and light design ensure easier to carry, fits every bag or case and children will not feel the weight when use this 3D printer pen.

Detailed Information available on our Homepage…

3D Printing Pen Kit, Professional 3D Printing Pen with OLED Display for kids,Doodling Art Craft Making,Adults,Girls,Artists,Doodling,Teens, Printing 1.75mm PLA/ABS Filament Refills

Specifications:
Material: Durable aircraft-grade aluminum
Size: 7.1*0.71*0.71 inch (180*18*18mm)
Weight: 52g
Voltage: DC 5V 2A
Nozzle Diameter: 0.6mm
Printing Temperature: 180-220℃ adjustable
Printing Speed: Low, Mideum, High speed
Printing Model: PLA 1.75mm
Cable length: 1.5m
Package Size: 18.8*15.5*6cm
Package Weight: about 400g
Package included: 1* 3D pen, 1*USB cable, 1* power adapter, 1* 24.6ft(7.5M) random color PLA filament, 1* pen holder
Operation Guide:
1.Connect the 3d pen to power supply(5V/2A),It enters into standby condition when the LED screen lights. 2If you need to switch to the ABS filament mode please press the “√” button for 3 seconds.The LED screen displays MATEL:ABS mode. 3.Press the “«” button once and load filament refills into the pen. (Please gently push the another end of the filament until it goes through the gear.)Double click the “«” button to start loading automatically. (Make sure that both end of the filament is smooth) 4.Press the “»” button once to start unloading automatically,when the unloading progress is about to finish please pull the filament gently out of the pen.(The unloading progress must be finished in one time.
WARNING:
1. Applicable age: 5 years old and above.
2. Pay attention to the temperature of the nozzle, please do not touch the nozzle during using.
3. Please do not use the nib to touch other hard objects.
4. Please do not use foreign materials to load the hole of filament or the nib.
5. Please do not use other manufacturers’ consumables, so as not to cause incompatibility.  
6. This product is not waterproof.
7. Make sure that the filament is completely out of the pen and cut off the power supply after using.
8. Please put the pen in a place where children can not touch after using.

Product Features

  • 【Normal Temperature 3D pen】 compatible with Both ABS & PLA Filament – The Aircraft-grade aluminum 3D drawing pen is suitable for both 1.75mm ABS & PLA Filament. PLA Filament is non-toxic and odorless,safer than ABS, and tend to be widely-used filaments.Please do not use with PCL filament.
  • 【Free and Safer PLA Filament Included】 This 3D Printing Pen comes with free one 7.5 meters PLA filament s for Kids,doodling art craft making,adults,artists,teens ,Girls.Save 10% on extra PLA filament [ASIN:B01MYA09QM] upon purchase this 3D pen,enter code 3WY78DAL at checkout.
  • 【Adjustable Temperature and Speed】enables you control the temperature and speed when you enjoy drawing in 3D model.Please make sure that the electricity of the power bank is no less than 40% when you connect it to the 3D pen.
  • 【Package Content】 1*3D printing pen 2. 1*Power adapter(5V/2A) 3.1*USB cable 4.1*Manual 5. 1*24.6ft(7.5m) length PLA filament 6.1*pen holder The heater nozzle of the 3d printing pen can be replaced. Asin:B0722K6Y6B
  • 【Warranty from the purchase date】30 days return [replace] a purchase,1 year Warranty and whole-life customer service, please contact us through us.services@goodrvm.com if you have any problem with this 3D pen

Check Out Our Website For Details…

7TECH 3D Printer Pen Newest and Professional with LCD Screen light Blue Free Filament Included

THANK YOU FOR SHOPPING THE BEST 3D PRINTING PEN IN 7TECH MALL!

√7TECH 3D PEN was featured as “The Best 3D Printing Pen ” in popular science on July/August 2016 Issue

√3D pen is a great tool for anyone interested in 3D creation – from the newbie to expert, The only limitation of 3D drawing is your imagination

The 7TECH 3D Printing Pen Package includes following:
√ 1x Blue 3D Printing Pen
√ 1x 110-240V USA Power Adapter
√ 3x 1.75mm ABS Filament with random colors, 10 gram per loop
√ 1x Operation instruction manual
√ 1x Spatula to protect your finger from hot nozzle

Product Features:

>Heating temperature: 160 to 230 degree adjustable
>With advanced thermal control, filaments jamming detection, and super silence design
> The slender pen body suits hands use
> The speed can be changed by single finger
> Plastic heats up and then cools to a solid shape
> A wonderful gift for creative children and adults

Specifications:

> Nozzle diameter: 0.7mm
> Adapter Current: 110V – 240V 3A
> Power input: 12V 3A
> Pen Size: 184mm * 31mm * 46mm
> Weight: 65gNotice:

Buy authentic 3D Pen in 7TECH MALL to enjoy one year premium assurance. Fraud pen from other sellers are not entitled to assurance; All 7TECH pen will gone thru strict QC and there will be testing filament inside pen body

Thank you for your business and welcome shop again in 7TECH MALL!

Get in touch with us to get a free 100 Stencil E-book!

Product Features

  • ★ -reality-3d printing pen makes you watching your imagination come to life.
  • ★ -easy control-you can easily control extrusion speed, temperature, filament; most important thing is it is only 65g in weight compared others in heavy design.
  • ★ -safe-advanced unclogging mechanisms technology prevents jamming for easy maintenance.
  • ★ -mess free: non-toxic abs filaments allow you or your little ones to draw in the air. Filament immediately cools when it exits the pen, so the tip & filament won’t burn or start a fire if they forget to turn it off. And it won’t stick to clothes, furniture, carpet or hair.
  • ★ -top customer care-buy authentic 3d pen with confidence in 7tech mall, you are entitled to one year premium quality guarantee! Fraud pens from other sellers are not entitled to guarantee.

Click Here For More Information