SainSmart Ramps 1.4 + A4988 + MK2B + Mega2560 R3 + LCD 12864 3D Printer Controller Kit for 3D Printers RepRap

This is the new SainSmart 3D Printer Starter Kit, developed specially for those beginners who are interested in 3D printer. You will have a complete set of Sainsmart’s most common and useful electronic components. You may learn about Sainsmart through using these basic projects.

Sainsmart RAMPS 1.4 is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.

Package List:

1 x RAMPS 1.4
1 x Mega 2560 R3
5 x A4988 driver
1 x LCD 12864 With Controller
1 x SD card breakout For ramps
1 x Cooler Fan for 3D ramps
6 x Mechanical Endstop with cable
1 x RAMPS 1.4 wiring cable
1 x Heatbed MK2B
5 x NEMA 17 Stepper Motors
1 x USB Cable

Note:
Download the doumentation & codes here:
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/3d+12864/arduino-0023.rar
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-962/3D.rar

Product Features

  • Sainsmart Mega2560 R3 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator.
  • Sainsmart A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
  • Sainsmart LCD 12864 contains a SD-Card reader, an rotary encoder and a 128 Character x 64 Line LCD display.
  • SainSmart Mechanical Endstop perfect for any 3D printer. 100% compatible with all Prusa and Mendel 3d printer variants.

Click Here If You Need More Detailed Info…

SainSmart Red Copper Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs

SainSmart 3D Printer Filament

SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood/ Metal 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.

This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!

Features:

* Widely used in health care, education, toys, building, automobile, electronics, anime field, etc.
* For common 3D printers such as Reprap, FlashForge, MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2, UP! and more.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

Product Features

  • 40% Real Red Copper,60% PLA
  • 0.5 KG (Approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 190°C – 200°C (374°F – 392°F)
  • Can be grinded and polished ; Fine gloss and corrosion resistance

Check Out Our Website For Details…

SainSmart InstaRep A8 DIY 3D Printer, SD Card Printing, Supports ABS PLA TPU Filament Reprap Prusa i3 High Precision Printing

Overview:

SainSmart A8 3D printer provides you all the necessory parts to build up your own 3D printer. We are a well known brand for 3D printer and 3D filament, and we provide 1-year warranty. Let’s make our ideas actual!

Features:

   ● It can be used for personal use, business use or even for educational use.
   ● Supports ABS/PLA/TUP ect. This printer works well for multi material of filament. It also comes with a spool holder, very convenient.
   ● Supports SD-Card, it can still print when off-line.
   ● Easy to Assemble. With deatail instruction, user is able to build up his own 3D printer easily.

Notice:
1. Please follow the instruction to connect the power supply.
2. Please check the voltage switch on the power before powering it.
3. Please aviod continuous printing for a long time. If necessary, add additional fan for cooling.

Specification:

   ● Frame Material: Acrylic
   ●SD-Card & LCD Screen: Yes
   ●XY Axis Accuracy: 0.012mm
   ● Z Axis Accuracy: 0.004mm
   ● Number of extruder: 1
   ●Print Color: Single
   ●Extruder Diameter: 0.4mm
   ●Max. Print Size:220x220x230mm(8.66*8.66*9.06 inch)
   ● Nozzle Temp.: Recommended: 195℃ for PLA, Max 250℃
   ● Heating Plate Temperature: around 100℃
   ● Heating Plate Material: Aluminum
   ● Printable Materials: PLA, ABS, TPU ect.
   ● Filament Diameter: 1.75mm

Pack List:

1x SainSmart A8 3D printer (unassemble)

Reference:
http://s3.amazonaws.com/s3.image.smart/download/101-91-200/SainSmart%203D%20Printer-InstaRep%20A8%20User%20Manual.pdf

Product Features

  • TPU flexible filament is included. Test with our best filament right away.
  • 1.75mm direct feed extruder. Compatible with TPU, ABS, PLA, Conductive PLA, Wood, Metal composites, and dissolvable PVA etc.
  • Industrial-grade high precision printing
  • Easy offline printing and bulk printing with LCD panel and SD card slot
  • 1-year Warranty.

Click Here For More Information

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament -0.5kg/1.1lbs (Natural)

SainSmart 3D Printer Filament

* SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.
* This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
* The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!
 

Feature

* PVA is a water-soluble synthetic polymer.
* PVA is degradable and dissolves quickly in water.
* It is the perfect filament to use as support material for it’s dissolvable properties.
* Generally, PVA is used in conjunction with PLA not ABS because it adheres well to PLA.The extrusion temperature difference can also be problematic with ABS.
* Importantly, PVA should not be allowed to sit at temperatures higher than 200°C for an extended period of time, known as pyrolysis, it will form jams which are extremely difficult to remove.
* Unlike PLA and ABS, you cannot remove the jam by increasing the temperature.
* Clearing the jam in the nozzle will often require it to be re-drilled or replaced altogether, so be careful!
 

Compatible 3D Printers:
All FDM 3D Printers
• PIXMA MG5420
• Replicator 2
• Ultimaker 1
• RepRap
• Replicator 2x
• Prusa i3
• Mendel Prusa
• Ultimaker 2
• Replicator
• Print/bot
• Leapfrog Creatr
• Zcorp
• Solidoodle
• UP! Plus
• Form 1
• Cube X
• Up! Mini
• Creator
• Mende!Max
• uPrint
• PowerWasp
• Dimension
• Lulzbot
• Felix 2.0

 

Let’s See How PVA Support: https://www.youtube.com/watch?v=LCpp6SmvlJo

Product Features

  • 0.5 KG (approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • PVA 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 160°C – 180°C (320°F – 356°F)
  • Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 1.50″

Check Out Our Website For Details…

SainSmart ABS Conductive Filament for 3D Printers, 1kg/2.2lb, Black (1.75mm)

SainSmart 3D Printer Filament

SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU and Wood 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.

This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!

Features:

Conductive ABS was made by ABS material, blends of carbon fiber, carbon black and permanent conductive masterbatch. Now you can print your own circuit boards and other electronics projects!

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

Product Features

  • 1.75mm diameter, 1kg net weight, ABS Filament
  • Filament Roundness: +/- 0.07mm
  • Filament Diameter: +/- 0.05mm
  • Recommended Print Temperature: 230 – 240°C, depending on printer model
  • Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer

Check Out Our Website For Details…

SainSmart Copper Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs

SainSmart 3D Printer Filament

SainSmart 3D Printer Filament provides quality ABS/ PLA/ PVA/ HIPS/ PETG/ TPU/ Wood/ Metal 3D filament with vibrant colors. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.

This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool.
The quality of the filament is of great quality, and no kinks or breaks. Best choice for perfect printing!

Features:

* Widely used in health care, education, toys, building, automobile, electronics, anime field, etc.
* For common 3D printers such as Reprap, FlashForge, MakerBot,Afinia,Solidoodle 2,Printrbot LC,MakerGear M2, UP! and more.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.

3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

Product Features

  • 40% Real Copper,60% PLA
  • 0.5 KG (Approximately 1.10 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 190°C – 200°C (374°F – 392°F)
  • Can be grinded and polished ; Fine gloss and corrosion resistance

Check Out Our Website For Details…

SainSmart DIY Control Palletizing Robot Arm Model for Arduino UNO MEGA2560 (4-Axis) (Cyber Monday Sale)

Controller Specifications:

* Digital I/O port 0~13
* Analog I/O port 0~5
* Support USB interface protocol and power supply
* Support ISP download function
* Support single chip TX/RX terminals
* Support USB to TTL TX/RX terminals
* Support AREF terminals
* Support 6 PWM terminals
* Input voltage: USB power supply or external 7-12V DC input
* Output voltage: 5V DC output/3.3V DC and external power input
* Adopts Atmel Atmega328P-PU
* Size: 70*54mm

MG995 55g Servo Specifications:

* Size: 40.7*19.7*42.9mm
* Working torque: 13kg/cm
* Respond rotation speed: 53-62R/M
* Working temperature: -30~+60 C
* Dead zone: 4ms
* Plug: JR, Tutaba
* Rotation angle: 180 degree
* Analog servo
* Working current: 100mA
* Working voltage: 3-7.2V
* Metal gear, coreless motor, two ball bearing
* Operation speed: 0.17s/60degree(4.8V); 0.13S/60degree(6.0V)

SG90 9G servo specifications:

* Size: 23*12.2*29mm
* Weight: 9g
* Working torque: 1.6kg/cm
* Respond rotation speed: 0.12-0.13s/60degree
* Working temperature: -30~+60 C
* Dead zone: 5ms
* Plug: JR, Tutaba
* Rotation angle: 180 degree
* Analog sero
* Working current: 100mA
* Working voltage: 3.5-6V
* Metal gear

Package List:

1 x servo mechanical arm set
3 x MG995 55G servo
1 x SG90 9G servo
 

Product Features

  • Simulate real palletizing robot arm structure
  • PVC material, CNC processing, Active joint bearing connection
  • Adopts MG995 55g metal gear servo 3pcs
  • Maximum arm distance: 300mm
  • Using three MG995 55g copper gear 13kg/cm working torque servos 180 degrees

Visit The Website For More Information…