Micro SD Extension SD Card Extension Cable Extender Adapter Flexible Cord Male to TF Flash Memory Card Kit Reader Female Soft Flat for Monoprice Select Mini Anet A8 3D Printer/Raspberry Pi/GPS/TV

This SD Extension cable conveniently and inexpensively solves problem which makes the insersion and removal of cards in the SD slot very difficult. 3 kinds of cables to switch (SD to SD/TF to TF/SD to TF), free conversion. Let Upgrade navigation map card and music more convenient. You are deserve to have!

Package:
1 X Soft Flat FPC SD Extender Cable 18.9 inch
1 X WinterSweet Mark

Tips:
1.The memory card not included.
2.The Extension Cable Card Read doesn’t support hot-plugging.

Lifetime Warranty!

Product Features

  • ✔. The SD connection Cable is available long enough for most projects.
  • ✔. Works perfectly.No more wear or tear on your hardware’s SD card port.
  • ✔. It would allows the SD card to be recognized quickly.
  • ✔. SD extender ribbon cable recognize cards larger than 32GB easily.
  • ✔. Support for all products need to use the SD SDHC MMC RS-MMC Micro-SD TF memory Card extension cable 18.9 inch (128MB TO 64GB) Insert the SD card into the SD card slot of the extension cable, then Insert the SD adapter card into the machine (GPS,Car DVD,DVR,3D Printer,Camera,Raspberry Pi,Kindle,3D Mapping,Macbook,Arduino,TV kit, LED/LCD screen,Mobile phone/Smartphone,Outdoor advertising screen, Large minitoring instrument,etc.)

Detailed Information available on our Homepage…

Monoprice Select Mini 3D Printer with Heated Build Plate, Includes Micro SD Card and Sample PLA Filament – 121711 – Black

MP Select Mini 3D Printer

Too often, getting a low-cost 3D printer means getting a box of ill-fitted parts with poorly written and incomplete documentation. You end up spending hours on the internet, searching forums and asking for help to get the printer assembled and operating properly.

That isn’t how Monoprice operates and this 3D printer is a perfect example! This printer not only comes fully assembled, it has already been calibrated at the factory. All you have to do is perform a quick check to verify that the print bed is still leveled, in case it shifted during shipping, then load the included MicroSDTM card, load some filament, and start printing the preloaded model. Nowhere else will you find a 3D printer ready to print out of the box at such a low price!

Affordable 3D printing for everyone

All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA.

Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.

Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box!

Features

Factory Calibrated
Heated aluminum build plate nozzle cooling fan for printing all filament types
Quick-release steel gear filament feeder
Easy to use color LCD
0.4mm extruder diameter
Complete kit with bed scraper, and MicroSDTM card with preloaded model files
Micro USB and MicroSD card connectivity
PC and Mac compatible
Compatible with Cura, Repetier, and other

Product Features

  • All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA
  • Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.
  • Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory.
  • We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box!
  • PC and Mac compatible. Compatible with Cura, Repetier, and other software

Click Here If You Need More Detailed Info…

RepRap Champion Borosilicate Glass (Boroglass) for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick

100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick – will not break when you remove your print from it.

Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and thicker than typical 3mm plates sold for use with MK2 heated beds.

Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. Please make sure your 3D printer will accept this size before making purchase.

Please take a look at the supplied drawing for dimensions and details.

Glass plate features:

Dimensions: 219x219mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lame glass green tint).
Cut corners to clear with mounting screws.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heater board.

Package Contents:

1 x Borosilicate Glass Print Surface 219x219mm x 4mm thick.

Product Features

  • Thicker 4mm boro glass plate will not warp or bend, perfectly flat
  • 100% Borosilicate glass content
  • Plate perfectly matches larger aluminum plates 220x220mm on Wanhao Duplicator i3, MP Maker Select, Anet A8

Click Here For More Information

T-Power AC DC Adapter for Monoprice Select Mini 3D Printer ( 115365 ) Switching Power Supply Cord Charger

T-Power Made with the highest quality (( Extra Long 6.6ft cable cord )) Total Cord Length Is Extended to 6.6 ft // Brand-new Input Volt Range: 100-240V (

Compatible :
12VDC Monoprice Select Mini 3D Printer ( 115365 )

Product Features

  • T-Power Made with the highest quality (( Extra Long 6.6ft cable cord )) Total Cord Length Is Extended to 6.6 ft // Brand-new Input Volt Range: 100-240V (
  • compatible : 12VDC Monoprice Select Mini 3D Printer ( 115365 )

Visit The Website For More Information…

RepRap Champion Z-Brace Frame Support Upgrade Kit for Wanhao Duplicator i3 Plus and Monoprice Maker Select Plus 3D Printer

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Package contents:

2 x Aluminum tubes pre-assembled with 2 x M5 steel ball rod ends (left hand and right hand threaded) and 2 x M5 counter nuts (left hand and right hand threaded).
2 x Lower mounting brackets.
2 x Upper mounting brackets.
4 x M3x8 socket head screws.
6 x M5x12 socket head screws.

Product Features

  • Very stiff all metal construction
  • High quality CNC machined parts
  • Black anodized parts will look and feel like part of original frame design
  • Each support rod can extend or contract to adjust frame to right angle.
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…

RepRap Champion Z-Brace Frame Support Upgrade Kit for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2 and V2.1 3D Printer

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Package contents:

2 x Aluminum tubes pre-assembled with 2 x M5 steel ball rod ends (left hand and right hand threaded) and 2 x M5 counter nuts (left hand and right hand threaded).
2 x Lower mounting brackets.
2 x Upper mounting brackets.
10 x M3x8 socket head screws.
5 x M5x12 socket head screws.

Product Features

  • Very stiff all metal construction
  • High quality CNC machined parts
  • Black anodized parts will look and feel like part of original frame design
  • Each support rod can extend or contract to adjust frame to right angle.
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…

RepRap Champion Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2, V2.1 and Plus 3D printers

This is second revision of Duplicator i3 / Maker Select Y carriage plate.

Y carriage plate compatible with popular Wanhao Duplicator i3. V2, V2.1, Plus and Monoprice Maker Select, V2, V2.1, Plus printers. Please note – plate was designed and manufactured strictly to these printer models, it will not work with standard open source prusa i3 due to difference in Y-rod distances (140mm or 150mm on Wanhao and 170mm on Prusa i3).

Second revision plate has hole pattern that fully matches stock plate, we just added weight saving holes and cutouts to make plate lighter. Material is the same – tempered aluminum alloy 6061-T6. Surface is brushed and anodized clear.

Plate can be used with stock bearings in plastic holders, as well as SC8UU bearings. We will also publish STL file for the bearing holder similar to stock bearing holder.

Wahnao i3 / Maker Select Y carriage plate features:
Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select
Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick.
Has additional provisioning hole for 3 point level adjustment of build surface.
Allows 3 x linear bearing configuration as well as 4 x bearing configuration.
Compatible with various aluminum build plates and heated beds, sold in our store.

Package Contents:
1 x Anodized Aluminum Y Carriage Plate for Monoprice Maker Select or Wanhao Duplicator i3

Product Features

  • Compatible with Maker Select, Wanhao Duplicator i3 versions V1, V2, V2.1 and Plus
  • Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2.1 and Plus
  • Very stiff, made of tempered aluminum alloy, brushed and anodized clear, no more issues with leveling
  • Y rod distance supported – from 140mm to 150mm

Detailed Information available on our Homepage…