Athorbot 3D Printing Build Surface, Black (Pack of 3) (310mm X 310mm) for CR-10 CR-10S 3D printer

Size: 310x310mm
Color: Black
Maxmum temperature: 200℃
Package content: 3x printing build surface
Package size:37.6×34.4×0.4cm
Package weight:0.37kg

Product Features

  • 1.Excellent adhesion: easy to install and no bubbles, print adheres well
  • 2.Easy to take off: take off easily and cleanly
  • 3.Great durability: can be used for many times of cycle print
  • 4.Work on many surface: apply to many 3d filament types printing, such as PLA, ABS and so on
  • 5.Withstand high temperature: resistant to high temperatures making it perfect for the filaments requiring heated build beds such as ABS

Detailed Information available on our Homepage…

Gizmo Dorks PEI Sheet 8″ x 8″ 1 mm 3D Printer Build Surface Ultem 1000

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Sheet can be easily cut down to desired size by scoring with a utility knife

Detailed Information available on our Homepage…

Gizmo Dorks PEI Sheet 12″ x 12″ 1 mm 3D Printer Build Surface Ultem 1000

PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion.

How to Use:

Cut the PEI sheet to size by scoring with a hobby knife. There are two methods to attaching the PEI to your print bed. The first method is to just clamp the sheet to the print bed using binder clips. We find that 2 on each side works great.The second method, get 3M 468MP Transfer Tape and use it to stick the PEI to the print bed.

Once the PEI sheet is attached, re-level your print bed and you are ready to go!

It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 5000 grit paper will also give the PEI sheet more life.

Product Features

  • MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass)
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results
  • Sheet can be asily cut down to desired size by scoring with a utility knife

Detailed Information available on our Homepage…

Anycubic Ultrabase 3D Printer Platform with Aluminum 12V/24V Dual Power MK3 Heatbed, Tempered Glass Plate, Durable Build Surface for Prusa i3 220x220mm

Note:
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly, it will demage the nozzle or lead to clogging;
* Clean the platform surface with alcohol/water.

Temperature settings for different filaments:
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃

Usage of Ultrabase Heatbed Kits:
Please kindly visit :
Official Web: www.anycubic3d.com
Youtube Channel: www.youtube.com/watch?v=zDup0gp9pLA

Specification:
Material: Tempered glass/Inorganic coating/Aluminum
Heatbed Power:140-145w
Voltage:12V/24V
Max Temperature:120 Degree Celsius 
Resistance around 0.9 ohm for 12V 
Resistance around 3.6 ohm for 24V
Item size: Tempered Glass 220x220x4mm ;Aluminum Heatbed 220x220x1.5mm
Thickness:approx. 5.5mm
Item weight:750g
Package Weight :870g

Package List:
1x ANYCUBIC Ultrabase 3D Printer Platform with Heatbed
4x M3X35 Screws
4x M3 nuts
4x Spacers

Product Features

  • Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
  • Good Flatness: Ultrabase is glass-based and the critical tolerance is ±0.2mm. (normally within the 0.1mm range).
  • High Durability: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃.
  • Easy to clean: Ultrabase is easy to clean by alcohol/water.
  • Compatibility: Ultrabase is compatible with most Cartesian style 3D printers (Build surface size :220x220mm)

Click Here For More Information

Signstek 3PCS 3D Printing Build Surface, Printer Platform Sheet Heated Bed Tempered, 220mm x 220mm x 0.5mm, ABS/PLA Compatible

Product Features:
1. Print without bending.
2. Peel off from the platform easily.
3. Peel off from the platform cleanly.

Product specification:
Size: 220mm x 220mm x 0.5mm
Corresponding Resin: ABS / PLA

Package:
3 x 3D Printer Platform Sheet

Product Features

  • It sticks to the 3D printer platforms and improves the molding accuracy of the filament.rinter platforms and improves the molding accuracy of the filament.
  • Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • After printing, peel off the model easily, and the sheet itself also devises the adhesive material, so you can peel it cleanly from the platform.
  • It could print for several times even in the same place. Since the sheet can be peeled cleanly from the platform, easy to maintenance and clean up.
  • Size: 220mm x 220mm x 0.5mm; Compatible Resin: ABS / PLA

Check Out Our Website For Details…

3D Printing Surface Bundle – Borosilicate Glass and Adhesive Printing Surface with 4 Clips – Starter Kit for 3D Printers

Just getting started with 3D printing? Can’t decide between using a glass plate or adhesive surface? Why chose when you can have both!

Borosilicate glass provides a stable print base for even low diameter printouts, and due to its extreme heat resistance is perfect for heated beds when printing tricky filaments!

Our adhesive surface provides extreme grip, and is great for warp free printing with ABS, PLA, PETG, HIPS, PET+, brick, and flexible (TPE) filaments!

Both surfaces are premium quality, durable printing bases and will transform your 3D printing experience.

Specifications
Adhesive Print Surface
Size: 8″ x 8″
Maximum Temperature: 200℃/392°F
Glass Plate
Size: 7.8″ x 8.3″ x 0.1″
Maximum Temperature: 550℃/1022°F

Product Features

  • PRINT WITH STABILITY – Just getting started with 3D printing? This set of clips, glass plate and 3D printing surface will let you test the most popular printing surfaces and find the right one for you!1
  • PERFECT FOR ALL FILAMENTS AND PRINT QUALITIES – Suitable for all types of filament glass can be used for your ultra fine quality printouts whereas our adhesive surface will provide extreme grip for all types of filament!
  • SIMPLE TO INSTALL – Just clean your print bed and peel off the backing, the adhesive surface sticks fast. Then use the provided clips to keep your glass plate in place on top!
  • EXTREME HEAT RESISTANCE – Great for heated print beds, our glass sheets have an ultra-high resilience to rapid heating and cooling. So won’t crack like standard soda lime glass under intense direct heat.
  • NO PREP PRINTING – Say goodbye to tape, hairspray and glue sticks, once installed and calibrated, you can print almost any filament onto your new adhesive surface without worrying about it coming unstuck.

Check Out Our Website For Details…

HICTOP 3D Printing Build Surface Tape for Heated Bed, 8.4″ x 8.4″ Square,Black (Pack of 3)


Compatible with ABS, PLA, HIPS, PET+, brick, and flexible (TPE) filaments (sold separately). Background is made of 3M adhesive ,
easily stick on the heat bed platform.
Size: 8.4″ x 8.4″ or 214mmx214mm
Thickness: 1mm

Product Features

  • Build sheet adheres to a print bed to help the filament stick during printing, it is easy to take off the models
  • Compatible with ABS, PLA, HIPS as well as other kinds of filament
  • Durable construction allows for multiple uses with either the same or different filament material
  • Single sheet design installs more quickly and with fewer bubbles than tape or films
  • One tape can be use repeatedly for at leat 3 month normally

Detailed Information available on our Homepage…