For Arduino Professional 3D printer CNC Kit,Longruner GRBL CNC Shield +UNO R3 Board+RAMPS 1.4 Mechanical Switch Endstop+DRV8825 A4988 GRBL Stepper Motor Driver with heat sink+Nema 17 Stepper Motor

CNC Shield Board: Latest CNC Shield Version 3.0 for arduino. GRBL 0.9 compatible. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13). 2 x End stops for each axis (6 in total). Coolant enable. Compatible with A4988 or DRV8825 stepper driver. Runs on 12-36V DC. DRV8825 Stepper Motor Driver: Stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It’s not arduino official board but it’s compatible with all arduino software and hardware). Nema 17 Stepper motor Specification: Model No.:17HD48002H-22B Step Angle: 1.8 deg Holding Torque: 59Ncm(84 oz.in) Rated Current/phase: 1.7A Frame Size: 41 x 41mm Body Length: 47mm Shaft Diameter: 5mm Shaft Length: 22mm Weight: 380g Mechanical Endstop Connection Description: Red line connect VCC (ramps of +) black wire connect the GND (ramps of -) Green Line connect SIGNAL (ramps in s) Tips: Under normal circumstances, the system must be configured to at least three mechanical switches. Advantage: Easy to install, the more common used styles. Length of Cable: 70 cm Great Package Includes: 1 x CNC Shield Board 1 x Longruner UNO R3 Board 1 x 1.5m USB cable for R3 Board 3 x Nema 17 stepper motor 1.7 A (with bracket and screw) 3 x Nema 17 Stepper Motor Mounting Bracket 3 x Mechanical Switch Endstop 3 x 3Pin 70cm Cable 4 x DRV8825 Stepper Motor Driver 4 x Aluminum heatsink w/ 3M tape backing 12x M3 Screws for bracket of stepper motor

Product Features

  • Latest CH340G CNC Shield expansion board Version 3.0 for Arduino.
  • Longruner UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable.
  • 4pcs DRV8825 Stepper Motor Driver with Heat Sinks.
  • 3pcs NEMA-17 Stepper Motor 84 oz.in (59 Ncm) 47mm Body 1.8 degree with Mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12pcs M3 Screws.
  • 3pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with 3Pin 70cm Cable.

Detailed Information available on our Homepage…

Myriann, DIY Hardwood Nostalgia Arcade Cabinet Stand For Playing Games – Black – For Nintendo Switch

Do your hands need a break from holding your switch? Do you want to turn your Nintendo Switch into arcade while playing with your friends? Seen those cool Nintendo Switch Arcade Cabinets people have been making, but don’t have a 3D printer? This Switch DIY Arcade Cabinet Stand easily gives what you desire, lets you set one up without much hassle and have more fun.

Product Features

  • Special arcade design to place your Nintendo Switch, create an arcade atmosphere and give you a better game experience
  • Precisely cut to fit your Switch, back-hole design ensures a way to charge your Switch while playing
  • Perfectly fit to your Switch air intake vents, make sure enough ventilation for the heat to escape
  • Rubberized grips for stability, unique arcade cabinet stand for playing your switch games
  • The Package comes with everything you need to quickly get the arcade cabinet standing – 8 pieces of hardwood, rubber bands to keep sturdy

Detailed Information available on our Homepage…

Aluoflower 220V/110V 15A Inlet Male Plug Power Supply Socket with Fuse Switch 3D Printer Parts


Description:

Features:
100% brand new and high quality.
220V/110V 15A inlet male power socket with fuse switch.
Can be used in 3D printing.
Use only with a 250V fuse.

Specifications:
Name: Power Supply Socket With Fuse Switch
Material (External): Plastic, Metal
Color: Black, Red, Silver Tone (Shown as pictures)
Size: 5×3×2cm / 1.97×1.18×0.79in (Approx.)
Cable length: 22cm/8.67in (Approx.)
Voltage: 220V/110V

Current: 15A
Application: 3D printing
Quantity: 1PC (other accessories demo in the picture is not included)

Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
4.No retail package

Package includes:
1 X Power Socket With Fuse Switch

Product Features

  • 100% brand new and high quality.
  • Application: 3D printing.
  • Cable length: 22cm/8.67in (Approx.)
  • Size: 5×3×2cm / 1.97×1.18×0.79in (Approx.)
  • 220V/110V 15A inlet male power socket with fuse switch.

Visit The Website For More Information…

Professional 3D printer CNC Kit for arduino, Kuman GRBL CNC Shield +UNO R3 Board + RAMPS 1.4 Mechanical Switch Endstop + DRV8825 A4988 GRBL Stepper Motor Driver with heat sink + Nema 17 Stepper Motor

CNC Shield Board:
Latest CNC Shield Version 3.0 for arduino
GRBL 0.9 compatible
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (6 in total)
Coolant enable
Compatible with A4988 or DRV8825 stepper driver
Runs on 12-36V DC

DRV8825 Stepper Motor Driver:
Stepper motor driver (upgraded from A4988, 2.5 A max current/phase. It’s not arduino official board but it’s compatible with all arduino software and hardware)

Nema 17 Stepper motor Specification:
Model No.:17HD48002H-22B
Step Angle: 1.8 deg.
Holding Torque: 59Ncm(84 oz.in)
Rated Current/phase: 1.7A
Frame Size: 41 x 41mm
Body Length: 47mm
Shaft Diameter: 5mm
Shaft Length: 22mm
Weight: 380g

Mechanical Endstop Connection description:
Red line connect VCC (ramps of +)
black wire connect the GND (ramps of -)
Green Line connect SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Advantage: Easy to install, the more common used styles
Length of Cable: 70 cm

Package Contents:
1 x CNC Shield Board
1 x Kuman UNO R3 Board 
4 x DRV8825 Stepper Motor Driver
4 x Aluminum heatsink w/ 3M tape backing
3 x Nema 17 stepper motor 1.7 A (with bracket and screw)
3 x Nema 17 Stepper Motor Mounting Bracket
12x M3 Screws for bracket of stepper motor
3 x Mechanical Switch Endstop
3 x 3Pin 70cm Cable
1 x 1.5m USB cable for R3 Board

Product Features

  • Latest CH340G CNC Shield expansion board Version 3.0 for Arduino
  • Kuman UNO R3 Board, MCU: ATmega328, USB interface: ATmega16U2 with 1.5m USB Cable
  • 4pcs DRV8825 Stepper Motor Driver with heat sinks
  • 3pcs NEMA-17 Stepper Motor 84 oz.in (59 Ncm) 47mm Body 1.8 degree with mounting Bracket Kit DIY 3D Printer CNC Robot with 3pcs Mounting Bracket and 12 pcs M3 Screws
  • 3pcs Endstop Mechanical Limit Switches for 3D printer RAMPS 1.4 with 3Pin 70cm Cable

Click Here If You Need More Detailed Info…

URBEST Inlet Module Plug 5A Fuse Switch UR and CE Certification Male Power Socket 10A 250V 3 Pin IEC320 C14

3 pin IEC320 C14 plug, UL certification, 7 terminals, is used widely in lab equipment, fitness equipment, industrial automation equipment, etc. Use only with a 250V fuse.

Product Features

  • Total Size : 5.8 x 4.8 x 3.4cm / 2.3″ x 1.9″ x 1.3″(LxWxH);Plug Type : 3 Pin IEC320 C14
  • Product Name : Power Socket w Switch Fuse;Material (External) : Plastic, Metal;Color : Red, Silver Tone, Silver Tone
  • Weight : 24g;Package Content : 1 x Power Socket
  • Hole Center Distance : 3.9cm / 1.5″;Bottom Size : 4.7 x 2.7cm / 1.9″ x 1.1″(LxW); Having UR and CE certification
  • Voltage/ Current : 10A, 250V AC;Hole in Top Face Diameter : 0.42cm / 0.16″; Fuse Ampere: 5A

Visit The Website For More Information…

TriGorilla LJ12A3-4-Z/BX Inductive Proximity Sensor Switch NPN DC6-36V 3D Printer Bed Self Adjustment

Specification:
Dimention: M12 x 60mm
Detection Distance: 4 mm
cable Length: 110cm
Voltage: 6-36 VDC
Type: NPN
Wiring colors:
Power (Positive): Brown
Common / Ground: Blue
Signal: Black
Package included:
1x 3D Printer LJ12A3-4-Z/BX Proximity Sensor

Product Features

  • This Proximity sensor is very useful and inexpensive solution for automated heatbed level adjustment
  • It detects metal objects (aluminum print surface)within 4mm distance

Detailed Information available on our Homepage…