TOOTO 3d Printer Accessory All metal Bowden Remote MK8 1.75mm Filament extruder Full set for Makebot Kossel Reprap Prusa3 L


Description:
3D Printer MK8 Bowden Extruder
Used for 1.75mm filament, Reprap, Makerbot
Full Metal Aluminum Alloy
This is improved version,there are 2pcs Pneumatic fittings so that it feeds more fluently!!!

Application:
Reprap, Makerbot, 1.75MM Filament

Feature:
Full Metal

Packing Included:
1x MK8 remote printer head left hand (not included steppter motor)

Product Features

  • Weight: 0.18KG
  • for 2*4mm PTFE pipe
  • for 1.75mm Filament
  • Aluminium Alloy
  • Oxidation treatment

Detailed Information available on our Homepage…

TOOTO 2 x PC4-M6 push-in Fittings + 2 Meters PTFE Teflon Tube For RepRap Rostock Kossel 3D Printer Bowden Hotend 1.75mm


Bowden line teflon tubing is for 1.75mm filament. 4mm OD 2mm ID, length is 2 Meters.
Two PC4-M6 push-in tube fittings are also included in this kit.

Package contents:

1 x 2 Meter PTFE/teflon tube.
2 x PC4-M6 Brass Fittings for 4mm OD Tube with M6x1 Threads.

Product Features

  • Bowden line teflon tubing is for 1.75mm filament. 4mm OD 2mm ID.
  • PC4-M6 Pneumatic Straight Fitting for 4mm OD tubing M6 6mm Reprap 3D Printer etc

Detailed Information available on our Homepage…

TOOTO 3MM MK3 Aluminum Board PCB Heatbed Heat Bed For Reprap Standard 3D Printer


Specifications
1 layer 35¦Ìm copper
Voltage: 12/24V
Resistance: 1.4-1.6 Ohm at 12V
5.0-5.4 Ohm at 24V
Max. Temp: 180¡ã C
Heating Time: 24V reaches 100¡ã C in 2 minutes
Dimensions: 215x215x3mm
Weight: 363g
Colour: Black with White Mask/Text

MK3 can choose 12 v and 24 v two voltage,
12 v £ºone line thread cross 1, another cross 2, 3£»
24 v £ºone line thread cross 2, another cross 3 (1 don’t need to pick up).
The new circuit, whether meet the 12 v or 24 v, the power is stable.

package include
1xPrinter Heatbed

Product Features

  • MK3 can choose 12v and 24v two voltage, more practical
  • Aluminum plate process
  • The new version of the circuit, whether connected 12V or 24V the power are stable

Detailed Information available on our Homepage…

TOOTO 3 PCS 100Kohm NTC 3950 Thermistors with Teflon Insulated Wiring for RepRap Prusa 3D Printer Extruder or Heated Bed pre-wired


Lot of 3 pcs NTC 3950 thermistors. Thermistors have been pre-wired for your convenience with 1 meter teflon insulated wires.

NTC 3950 Thermistor features:

- For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25¡ãC=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter

Package contents:

- 3 x NTC 3950 100k Thermistor assembled with 1 meter teflon wiring.

Product Features

  • Support for NTC 3950 is included in Marlin firmware, use TEMP_SENSOR 11 in firmware configuration
  • Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
  • Use it with heated bed or extruder
  • Cable length :1m
  • Temperature sensor 100K¦¸ accuracy of ¡À 1%

Detailed Information available on our Homepage…

TOOTO 213mm*200mm*3mm 3D printer Borosilicate Glass plate High boron silicon toughened Bed Flat Polished Edge for MK2 MK3


Description:
Size: 213*200*3mm
Thickness: 3mm
Material: Borosilicate Glass
Application:
For Reprap 3D printer heading bed use

Features:
1. Using High Boron Silicon Material, High Transparency;
2. There has good adhesion When heated, easy separation after cooling of plastic parts;
3. SavING the replacement of special plastic film troubles, There is no viscosity reducing problem when special plastic film used;
4. For the user who use 3D printer more frequently, You can buy two piece to replace.

Package:
1 piece glass plate

Product Features

  • Size: 213*200*3mm
  • To print with ABS or PLA, lightly spray the surface of the glass with AquaNetTM hairspray, then install the glass.
  • Fit MK2 MK3 Heated Bed 3D Printers w/ 213mm X 200mm print platform
  • Flat Polished Edge for safe to handle

Detailed Information available on our Homepage…

TOOTO Brand New 5 PCS Reprap 12V 40W 6*20 Ceramic Cartridge Heater for 3D Printer Prusa Mendel


Description:
*Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention.
*The heating wire inside which is wound onto a ceramic core.
*The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .
*The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas).
*Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Application:
1 Semiconductor chamber heating
2 Semiconductor wafer lead connection
3 Semiconductor wire and die bonding
4 Freeze protection and deicing of equipment in cold climates or applications
5 Humidity Control
6 Patient Comfort heating used in medical devices
7 Mold die and platen heating
8 Seal bars used in packaging equipment
9 Test sample heating in gas chromatography

Package Included
5pc x Cartridge Heater

Product Features

  • Voltage: 12v, Power: 40w
  • Material: 304 Stainless Steel
  • Wire Length :1m
  • Diameter: 6mm
  • Length: 20mm

Detailed Information available on our Homepage…

TOOTO 5 PCS Male Straight Pneumatic 4mm M6 Ptfe Tube Push In Quick Connect Fitting PC4-M6 for Reprap 3D Printer Bowden Extruder


Specification:
PC4-M6 Pneumatic Connector for Bowden Extruder ¨C Push Fit ¨C PTFE
PTFE Tubing OD: 4 mm
Thread: 6 mm
Inclued:
5 x PC4-M6 Pneumatic Connector for Bowden Extruder

Product Features

  • PTFE Tubing OD: 4 mm
  • Thread: 6 mm
  • Miniuature push-in pneumatic fitting
  • Medium:Air & Water
  • Apply for:PU hose ,Nylon Pipe ect

Detailed Information available on our Homepage…