Wanhao Duplicator 7 UV Resin 3D Printer (D7) – Version 1.3

The Wanhao Duplicator 7 DLP is a resin desktop 3D printer made by Wanhao.Duplicator 7 has a build area of 120x70x200mm and a layer resolution capability of 35 microns. The Wanhao Duplicator 7 DLP uses the vat photopolymerisation 3D printing technology. DLP stands for Digital Light Processing. For 3D printing the Wanhao Duplicator 7 DLP selectively cures liquid resin layer after layer in order to build an object. It uses the 395-405 nm wavelength and is compatible with most of the resin materials available on the market. The Wanhao Duplicator 7 DLP is equipped with a HD LCD screen which offers a 2560 x 1440 pixels resolution. The input is HDMI type. This 3D printer offers a build speed of 15mm-35 mm/Hour. The Wanhao Duplicator 7 DLP uses the Creation Workshop software to slice and control the printing process. In the box: D7 Printer, Spare Fep Tape sheet for Screen Jar for cleaning finished prints Scraper 2XLatex gloves Power cable Hex Driver 250ml Sample amount of White UV Resin

Click Here For More Information

RepRap Champion Borosilicate Glass (Boroglass) for Wanhao Duplicator i3 Anet A8 MP Maker Select 3D Printers, 4mm Thick

100% borosilicate glass, flat, heat resistant plate, does not warp during long term use. 4mm thick – will not break when you remove your print from it.

Plate fully matches 220x220mm heated bed on many popular 3D printers. This plate is larger and thicker than typical 3mm plates sold for use with MK2 heated beds.

Borosilicate glass material has excellent thermal and chemical properties compared to soda lime glass. Resists cracking due to direct high heat, perfect for a 3D printer bed. It is used on top of your heated print bed and provides excellent results. Please make sure your 3D printer will accept this size before making purchase.

Please take a look at the supplied drawing for dimensions and details.

Glass plate features:

Dimensions: 219x219mm, 4mm thick.
100% borosilicate heat resistant glass (it has yellow tint as opposed to soda lame glass green tint).
Cut corners to clear with mounting screws.
Very flat and does not warp during use.
Can be used as 3D printer print surface, with or without heater board.

Package Contents:

1 x Borosilicate Glass Print Surface 219x219mm x 4mm thick.

Product Features

  • Thicker 4mm boro glass plate will not warp or bend, perfectly flat
  • 100% Borosilicate glass content
  • Plate perfectly matches larger aluminum plates 220x220mm on Wanhao Duplicator i3, MP Maker Select, Anet A8

Click Here For More Information

Wanhao Duplicator i3 Plus 3D Printer

Wanhao’s Prusa i3 lineup is perhaps one of the best available in the market. Assembled and calibrated in factory and sporting an aluminium frame, the Wanhao Prusa i3 Plus is an excellent choice for businesses and enthusiasts alike. Quality comes with every Wanhao order. The Prusa i3 Plus sports a MK10 single extruder, which can print various filaments at generous print speeds. The i3 Plus comes with a heated plate and a special Wanhao build surface, minimizing warping and maximizing adhesion. All this technology is wrapped in a durable metal shell, ensuring endless hours of quality prints. Overall, the Wanhao i3 Plus is a more polished version of the Wanhao i3 V2.1. The i3 Plus benefits from better hardware and an integrated board to minimize hardware malfunctions. This product comes assembled and semi-calibrated, but comes with up-to-date├é┬áinstructions.

Click Here For More Information

RepRap Champion Z-Brace Frame Support Upgrade Kit for Wanhao Duplicator i3 Plus and Monoprice Maker Select Plus 3D Printer

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Package contents:

2 x Aluminum tubes pre-assembled with 2 x M5 steel ball rod ends (left hand and right hand threaded) and 2 x M5 counter nuts (left hand and right hand threaded).
2 x Lower mounting brackets.
2 x Upper mounting brackets.
4 x M3x8 socket head screws.
6 x M5x12 socket head screws.

Product Features

  • Very stiff all metal construction
  • High quality CNC machined parts
  • Black anodized parts will look and feel like part of original frame design
  • Each support rod can extend or contract to adjust frame to right angle.
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…

RepRap Champion Z-Brace Frame Support Upgrade Kit for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2 and V2.1 3D Printer

This kits is a result of our effort to improve existing and popular Z-brace kits based on 3D printed parts. Our kit is fully metal kit, no printed parts. It looks minimal compared to the 3D printed Z-brace designs, but it will make your frame completely stable, just like other similar kits.

In our kit we use ball joints to eliminate any tension created by misalignment between upper and lower bracket. Off shelf M5 ball rod ends are making our Z-brace design simple and clean looking.

Convenient feature of our kit is ability to allow fine adjustment of the each Z-rod length. Z-Brace rod design is based on turnbuckle principle – each rod will extend and contract by turning tube clockwise or counterclockwise. When you are done with adjustment – just tighten counter nuts on each rod end to get rid of any small play and you will make your adjustment permanent. After you tighten counter nuts your frame will become completely solid and stable.

Package contents:

2 x Aluminum tubes pre-assembled with 2 x M5 steel ball rod ends (left hand and right hand threaded) and 2 x M5 counter nuts (left hand and right hand threaded).
2 x Lower mounting brackets.
2 x Upper mounting brackets.
10 x M3x8 socket head screws.
5 x M5x12 socket head screws.

Product Features

  • Very stiff all metal construction
  • High quality CNC machined parts
  • Black anodized parts will look and feel like part of original frame design
  • Each support rod can extend or contract to adjust frame to right angle.
  • Designed and manufactured by USA company

Click Here If You Need More Detailed Info…

RepRap Champion Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2, V2.1 and Plus 3D printers

This is second revision of Duplicator i3 / Maker Select Y carriage plate.

Y carriage plate compatible with popular Wanhao Duplicator i3. V2, V2.1, Plus and Monoprice Maker Select, V2, V2.1, Plus printers. Please note – plate was designed and manufactured strictly to these printer models, it will not work with standard open source prusa i3 due to difference in Y-rod distances (140mm or 150mm on Wanhao and 170mm on Prusa i3).

Second revision plate has hole pattern that fully matches stock plate, we just added weight saving holes and cutouts to make plate lighter. Material is the same – tempered aluminum alloy 6061-T6. Surface is brushed and anodized clear.

Plate can be used with stock bearings in plastic holders, as well as SC8UU bearings. We will also publish STL file for the bearing holder similar to stock bearing holder.

Wahnao i3 / Maker Select Y carriage plate features:
Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select
Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick.
Has additional provisioning hole for 3 point level adjustment of build surface.
Allows 3 x linear bearing configuration as well as 4 x bearing configuration.
Compatible with various aluminum build plates and heated beds, sold in our store.

Package Contents:
1 x Anodized Aluminum Y Carriage Plate for Monoprice Maker Select or Wanhao Duplicator i3

Product Features

  • Compatible with Maker Select, Wanhao Duplicator i3 versions V1, V2, V2.1 and Plus
  • Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2.1 and Plus
  • Very stiff, made of tempered aluminum alloy, brushed and anodized clear, no more issues with leveling
  • Y rod distance supported – from 140mm to 150mm

Detailed Information available on our Homepage…

MK10 Extruder Hotend for Wanhao Duplicator Maker Select FlashForge 3D Printer

* Brand New and High Quality * Fast shipping from California Item specification: Nozzle extrusion diameter: 0.4mm Nozzle, Throat and Heater Block thread size: M7x1 Length: 40mm Size of PTFE liner tube: 4mm OD 2mm ID Compatible with: FlashForge Creator, Wanhao or other Makerbot You will get: 1 x MK10 Extruder Stainless throat barrel, M7x1 threaded. 1 x PTFE liner tubing 4mm OD x 2mm ID. 1 x MK10 Extruder Nozzle, M7x1 threaded. 1 x MK10 Heater block, M7x1 threaded. Please note : This is High Quality After-Market part

Product Features

  • Nozzle extrusion diameter: 0.4mm
  • Nozzle, Throat and Heater Block thread size: M7x1
  • Length: 40mm
  • Size of PTFE liner tube: 4mm OD 2mm ID
  • Compatible with: FlashForge Creator, Wanhao or other Makerbot

Visit The Website For More Information…